Pages: [1]
Author Topic: Passat B5 - APU, 4B0 906 018 BD finally reads, wrong layout (I think)  (Read 2820 times)
dokalanyi
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 119



Hey all,
I was finally able to get the correct cable, and read the ecu. While I was choosing the memory layouts, all the 400 layouts kept saying the memory layout couldn't be verified. So I read using 800BB layout, when I used Me7Check, there were a bunch of errors.

So I split the file using splits (windows command line tool), and the first part verifies correctly. I've attached the split file, in case any one can help me take a look.

Couldn't figure out how to attach more than one file

Kind regards,
Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #1 on: January 19, 2016, 02:01:00 AM »

This is a 400BB flash, but there is a problem with these ecu's that causes it to only read in 800BB template.
Split it, and when you flash it back you can just use the 512kb version.
Logged

dokalanyi
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 119


« Reply #2 on: January 22, 2016, 04:02:00 AM »

Thanks. Will flash and let you know.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 15 queries. (Pretty URLs adds 0.001s, 0q)