EuroXs4
Full Member
Karma: +15/-31
 Offline
Posts: 209
|
 |
« on: September 02, 2011, 02:04:32 PM »
|
|
|
So my car is a 2000 audi s4 with a Abox ecu.I swapped in another Abox ecu that I bought with a stage 1 flash.The car cranks but does not start no communicationg to ecu.I tried another spare stock ecu that I have laying around the it does the same exact thing its also a abox.I put my stock ecu back and the car starts right up.Any suggestions??Am I missing something??OR do I have to change something??I check instrument cluster for faults and abs found no faults at all.Suggestions welcome.
|
|
|
|
|
Logged
|
|
|
|
|
judeisnotobscure
|
|
« Reply #1 on: September 02, 2011, 02:51:52 PM »
|
|
|
check your fuses, specifically the ecu fuses.
|
|
|
|
|
Logged
|
I have a b5 s4
but i just want to dance.
|
|
|
infinkc
Full Member
Karma: +6/-1
Offline
Posts: 94
|
|
« Reply #2 on: September 02, 2011, 03:04:36 PM »
|
|
|
So my car is a 2000 audi s4 with a Abox ecu.I swapped in another Abox ecu that I bought with a stage 1 flash.The car cranks but does not start no communicationg to ecu.I tried another spare stock ecu that I have laying around the it does the same exact thing its also a abox.I put my stock ecu back and the car starts right up.Any suggestions??Am I missing something??OR do I have to change something??I check instrument cluster for faults and abs found no faults at all.Suggestions welcome.
what type of flash, wonder if it has a lockout code like apr/giac |
|
|
|
|
Logged
|
|
|
|
Jason
Hero Member
Karma: +38/-0
Offline
Posts: 500
Breaks everything!
|
|
« Reply #3 on: September 02, 2011, 03:29:26 PM »
|
|
|
Make sure the instrument cluster is coded properly. It is possible the new boxes you have are M boxes that were converted to A boxes.
|
|
|
|
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #4 on: September 02, 2011, 03:39:59 PM »
|
|
|
I dont think so both ecus have the following part number 8D0 907 551A.Both came out of 2000 s4's.One is bone stock other is a MTM Tune v2.0 Im not sure if that makes a difference.I wasnt able to communicate with either ecu when it was plugged into the car over OBDII plug using a scanner.I dont think it fuses because when I put my original ecu back car starts right up no problem.
Is it possible both ecus are no good???
|
|
|
|
« Last Edit: September 02, 2011, 03:41:43 PM by EuroXs4 »
|
Logged
|
|
|
|
Jason
Hero Member
Karma: +38/-0
Offline
Posts: 500
Breaks everything!
|
|
« Reply #5 on: September 02, 2011, 04:11:55 PM »
|
|
|
In vag-com Under instruments/adaptation go to channel 60... What value is displayed?
|
|
|
|
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #6 on: September 02, 2011, 04:32:47 PM »
|
|
|
Not sure I took the ecu out of the car already.However I can't get Galletto to enable boot mode either on either ecu.But I have a feeling my galletto cable might of taken a crap.I believe its supposed to light up green when initalized and it is not. But I am not sure.It is red all the time. I tried a bluetooth interface from scantool.net That I bought to communicate with the ecu on the bench just to scan it but also no response from ecu.Not sure.Its looking like 2 dead ecus to me.But im hoping thats not the case.Maybe tomorrow I will check.But cluster shouldnt matter I dont think.Since my car is a abox car as well 2000 s4.
|
|
|
|
« Last Edit: September 02, 2011, 04:36:40 PM by EuroXs4 »
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #7 on: September 03, 2011, 11:19:34 AM »
|
|
|
So I found out that the galletto cable I have is toast.Thats why I can't communicate with the ecu on the bench I just hope the Ecu's arent toast.Will keep you guys updated.It seems as most of the cables I have do not want to communicate with the nefmoto software.Probably because I am using a vag com 908 clone cable.We'll see.I Did Manage to pull a file From the MTM Tuned Abox Ecu I have.I just have no way of verifying if it is indeed a good read or not.
|
|
|
|
« Last Edit: September 03, 2011, 11:44:17 AM by EuroXs4 »
|
Logged
|
|
|
|
Tony@NefMoto
Administrator
Hero Member
Karma: +130/-4
Offline
Posts: 1389
2001.5 Audi S4 Stage 3
|
|
« Reply #8 on: September 03, 2011, 01:18:25 PM »
|
|
|
If you can communicate with your good ECU in the car, but not the other two when in the car, then it is likely the ECUs are not properly booting up. Why they aren't properly booting up could be caused by the ECU being tied to the cluster (maybe?), or the flash memory is corrupt, or the ECUs are fried.
|
|
|
|
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #9 on: September 03, 2011, 01:24:49 PM »
|
|
|
Both ECU's are Aboxes.Both out of 2000 Audi S4 Cars.If flash memory is corrupt is there a way to fix it??I cannot get into boot mode but like I said my galletto cable is toast.I will either have to get another one or try to read with your software.
|
|
|
|
|
Logged
|
|
|
|
Tony@NefMoto
Administrator
Hero Member
Karma: +130/-4
Offline
Posts: 1389
2001.5 Audi S4 Stage 3
|
|
« Reply #10 on: September 03, 2011, 01:48:50 PM »
|
|
|
I think you need to use boot mode to proceed any further in determining if the ECU is fried or the flash memory is corrupt.
|
|
|
|
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #11 on: September 03, 2011, 02:35:46 PM »
|
|
|
ok thanks for the input.So im gonna need a new galletto cable do you know where I can get a decent one???
|
|
|
|
|
Logged
|
|
|
|
Tony@NefMoto
Administrator
Hero Member
Karma: +130/-4
Offline
Posts: 1389
2001.5 Audi S4 Stage 3
|
|
« Reply #12 on: September 04, 2011, 11:49:51 AM »
|
|
|
I haven't had any problems with the Galletto I purchased off eBay for $25 shipped.
|
|
|
|
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #13 on: September 04, 2011, 05:31:54 PM »
|
|
|
yeah mine went up in smoke 2 days ago.It smells toast.Hopefully the only thing that fried is the galletto and not the ecus.lol
|
|
|
|
|
Logged
|
|
|
|
EuroXs4
Full Member
Karma: +15/-31
Offline
Posts: 209
|
|
« Reply #14 on: September 08, 2011, 07:02:41 AM »
|
|
|
So as it turns out I think I fried or bircked 2 spare ecus i had.One of them has a stage 1 tune. is it still possible to read out of AM29F800BB chip?? using a programmer and reader??
|
|
|
|
|
Logged
|
|
|
|
|
