How to identify if wideband equipped from software side?

Pages: [1]

« previous next »

Author

Topic: How to identify if wideband equipped from software side? (Read 4262 times)

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	How to identify if wideband equipped from software side? « on: January 18, 2016, 01:22:08 AM »

Hi,

friend of mine bought a TT 8n with AUM engine. Car has two O2s which usually means front O2 is wideband.
Thats where this question came to my mind.

So as a rule of thumb if i only have the software available: If read O2 in Eskonf = Wideband Huh

Is this true and/or are there better ways to identify how many O2s a car has?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: How to identify if wideband equipped from software side? « Reply #1 on: January 18, 2016, 01:28:52 AM »

Two o2s doesn't mean one is wideband.

However, to identify how many from the binary:

CWKONLS

Code word in % PROKON :
Sensors present upstream of the catalyst --->
Bank1: B lsv by Bit 0 = 1
Bank2: B lsv2 by Bit 4 = 16
(gives 17 as the sum)

Sensors present downstream of the catalyst -->
Bank1: B lsh by bit 1 = 2
Bank2: B lsh2 by bit 5 = 32
(gives 34 as the sum)
For all 4 installed seensors: CWKONLS = 51

00110011

NA/NA B2R/B2F NA/NA B1R/B1F
00 11 00 11

00000001=Just Bank1 front (4cyl)------>CWKONLS=1 no rear
00010001=Bank 1 and 2 front (v6/v8)--->CWKONLS=17 no rear


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

spacey3

Full Member

Karma: +12/-1
Offline

Offline

Posts: 198

	Re: How to identify if wideband equipped from software side? « Reply #2 on: January 18, 2016, 02:26:07 AM »

One for the more knowledgeable to confirm but is CATR only enabled on wideband cars? (Cars with a real egt sensor) Or do wideband cars exist without an egt sensor too?


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: How to identify if wideband equipped from software side? « Reply #3 on: January 18, 2016, 02:53:17 AM »

Thx

032HN and derivated is a good example for wideband without egt probe i think


	Logged

fknbrkn

Hero Member

Karma: +185/-23
Offline

Offline

Posts: 1454

mk4 1.8T AUM

	Re: How to identify if wideband equipped from software side? « Reply #4 on: January 18, 2016, 02:56:44 AM »

all ive seen 1.8t binaries
1024kb wideband
512kb not


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: How to identify if wideband equipped from software side? « Reply #5 on: January 18, 2016, 03:51:02 AM »

Quote from: fukenbroken on January 18, 2016, 02:56:44 AM

all ive seen 1.8t binaries
1024kb wideband
512kb not

There is a 512kb 1.8t beetle binary.
The 12v vr6 is also 512kb and wideband.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 11:29:46 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search