Hello everybody!

I'm doing a project at university and I need to document things as good as possible. I was explaning the load limitation algorythm and 2 problems appeared.

From Funktionsrahmen:


I understand that if SY_TRLX equals to 1, then the output from LDRXN/ZK is multiplied by vstrlx and becomes the output rlmx_w. Else (if SY_TRLX=!1) the output from LDRXN/ZK becomes directly the output rlmx_w

Ok, so SY_TRLX is System constant: intervention for workshop tester for rlmax present. Problem 1) I can't find its value in FR or in the flash. I guess the workshop tester is able to put it temporaly to 1 or 0 but I don't know its default value. What's logic is that in normal mode the algorythm executes as many corrections as possible... So stock value = 1?

Problem 2) vstrlx. All I've found is that its values can go from 0 to 1, but I can't find those values in FR or in the flash.


Does anyone know how to solve this 2 problems?

Ps: The object of study is my own car, 06A906032HJ

Any light'd be very helpful mates

Thanks a lot nyet!! I really appreciate it.

Do you know the stock eeprom value for vstrlx? 1? If it were, the status of SY_TRLX does not matter at all.

Otherwise things become more complicated as I'll have to disassemble code to find SY_TRLX

Ok, thanks again nyet