Oh and also if you're looking into this, there's an 032CN file knocking about, some DAMOS pack one that I've posted up some English def's for somewhere - it's actually a hybrid by the look of it, it's got power and disp/2.8 values across CAN for example, yet the torque of an R32, so some hex figures will match some won't if you're struggling with such files.
Probably been cross flashed time and again as people do with these - but I'd be wary of any DAMOS and build a stock file up really!
I think these kind of changes are related to the crc's and protocols of flash tools from what I can gather and what is accepted by the ecu/processors and their traps/timeouts etc
I'd try and look at these areas first if you can on any damos/def file to see what's what, would make your defining maps easier in the long run;
CAN CC Hybrid R32 mk4 v BDE by
Rick B, on Flickr
CAN Displacement by
Rick B, on Flickr
CAN Torque limits mk4 5 R32 by
Rick B, on Flickr
Cross flash R32 v BDE by
Rick B, on Flickr
BDE locations in screenshots should also match the BDE BG file attached in the thread (as too any other screenshots posted up).
