Pages: [1]
Author Topic: No lamda correction  (Read 3862 times)
Rl
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 31


« on: March 02, 2016, 03:01:38 PM »

Ok so after
-unpluging MAF (mafless setup)
-N112
-N249

there is no lamda correction and fueling goes off..
Also boost doesnt exceed 0.6 bar..
kfmirl,kfmiop,ldrxn and ldr-i are "set" for a tested boost profile of 1.5bar..

Havent touched codewords and maps for deleting maf until now because of this problem.. Maybe this is why this file doesnt work? Does this mafless setup needs  http://nefariousmotorsports.com/forum/index.php?topic=9136.0  for lamda to work again??
Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #1 on: March 02, 2016, 07:54:43 PM »

Need more info, what car, what engine, what file? If you do not setup eskonf and project configuration you can't just unplug random things.
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #2 on: March 02, 2016, 11:02:38 PM »

It's the N112. You need to code it out via ESKONF.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Rl
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 31


« Reply #3 on: March 04, 2016, 05:38:57 PM »

It's the N112. You need to code it out via ESKONF.

Thanks ddillenger!! U are right!! Just tried it and worked!! Its a 032QN file.. I just dont understand WHY correction shuts down when n112 removed.. Now i have to code out SAI maps coz i get an "internal control module" error. So aside eskonf i believe i have to change also other sai maps. Again Thank you!!
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: March 04, 2016, 06:02:34 PM »

No problem, happy to help!
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)