Pages: [1]
Author Topic: air conditioning / climatronic on canbus  (Read 626 times)
tao13
Hero Member
*****

Karma: +668/-733
Offline Offline

Posts: 503


« on: July 11, 2025, 05:27:58 AM »

Hi.
Is there any chance I can replicate (without asm changes) the compressor control function as it is on the seat ibiza 1.8t 06A906032TL (which has a climatronic that sends messages on canbus and does not have a direct wire to the ecu) on a 1.8t ecu BAM 8N0906018H? I tried with the flag in the KOS 113.160 Klimakompressor - steuerung functions, but the compressor does not start when I turn on the air from the climatronic.
« Last Edit: July 11, 2025, 06:14:38 AM by tao13 » Logged
gremlin
Hero Member
*****

Karma: +216/-10
Offline Offline

Posts: 736


« Reply #1 on: July 11, 2025, 03:48:41 PM »

CAN commands control depends on Climatronic firmware with PWM compressor type not from ECU firmware.
Logged
tao13
Hero Member
*****

Karma: +668/-733
Offline Offline

Posts: 503


« Reply #2 on: July 12, 2025, 12:47:30 AM »

it is in ecu firmware. if i put the ecu file 032tl on 018h bam ecu , air and compressor work ok, with bam 018h file the compressor not work. It is something ion ecu file for sure
Logged
tao13
Hero Member
*****

Karma: +668/-733
Offline Offline

Posts: 503


« Reply #3 on: July 22, 2025, 10:49:32 AM »

RESOLVED.
CW + KOS !
Logged
dal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 228


« Reply #4 on: Yesterday at 05:06:02 AM »

tao13, what was you were trying to archive? Control an PWM compressor in 8L car?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 14 queries. (Pretty URLs adds 0s, 0q)