NefMoto > Technical > NefMoto Software > NefMoto ME7 ECU Flashing Software - Version 1.8.0.0
Pages: [1] 2 3 4
« previous next »
Author Topic: NefMoto ME7 ECU Flashing Software - Version 1.8.0.0  (Read 73666 times)
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« on: June 08, 2011, 02:07:59 PM »


Summary:
The NefMoto ME7 ECU flasher is a free tool that allows you to read and write the flash memory in your ME7 ECU in car over the OBD port. All that is required is a FTDI based USB OBD cable that works in "dumb" mode. Dumb mode cables pass the raw serial data straight through without applying any higher level protocols.

Features:
-ECUs can be written through the OBD port in about three and half minutes.
-ECUs can be read through the OBD port in about five minutes.
-User defined memory layouts allow for flashing any memory arrangement.
-Writing erases and programs one memory sector at a time to allow you to recover the ECU in case of failure.
-Written and read data is verified with checksums to insure data was sent correctly.
-Reading and clearing error codes is also supported.

This software does NOT:
-Does not update checksums or validate the file you are flashing in any way.
-Does not allow you to edit any maps, value, etc. It is just for flashing.

System requirements:
-32bit or 64bit Windows Vista or Newer (Will work if run inside a virtual Windows machine on Mac and Linux as well)
-.NET 3.5 (installed as part of install process)
-FTDI USB D2XX driver version 2.06.00 or later
-3 megabytes of free hard drive space

Tested supported cables:
-eBay USB VAG KKL using the FTDI D2XX standard driver
-Ross-Tech HEX-KEY-CAN using the Ross-Tech FTDI D2XX driver ("boot in intelligent mode" must be unchecked in the VCDS options screen)
-Any dumb OBDII cable using the FTDI USB chip

Tested unsupported cables:
-Galletto (Does not support dumb mode)
-KWP2000+ Flasher (Does not support dumb mode)
-Old Ross-Tech KEY-USB (Does not support true dumb mode)

Tested supported ECUs list on the wiki:
http://nefariousmotorsports.com/wiki/index.php?title=NefMoto_ECU_Flashing_Software

Known issues:
-No known issues. Please let me know if you find any.

How to install:
Please uninstall any previous versions of the NefMoto ME7 ECU Flasher before installing the latest version.
To install, download and run the attached file ECUFlasherHostInstaller 1.8.0.0.msi.
Then ensure that you have the FTD2XX driver installed for your specific cable.
If you have a generic cable, download CDM20600.zip, then extract it and install the generic FTDI D2XX driver.
« Last Edit: June 08, 2011, 09:40:40 PM by Tony@NefMoto » Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #1 on: June 08, 2011, 02:08:21 PM »
What's new in this version:
-Lots of communication and multi-threading bug fixes
-Support for resuming failed flashing attempts from the current sector
-Support for licensed features
-Added ability to cancel the current operation in progress

You can find out how to enable the premium features here: http://nefariousmotorsports.com/forum/index.php/topic,954.0.html
« Last Edit: August 28, 2011, 02:53:32 PM by Tony@NefMoto » Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #2 on: June 08, 2011, 02:29:19 PM »
How do we enable premium features?
Logged
imolasb5
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 38
« Reply #3 on: June 08, 2011, 05:40:33 PM »
Wow Tony thanks for all you do man.
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!
« Reply #4 on: June 08, 2011, 07:42:41 PM »
Hot damn!
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #5 on: June 09, 2011, 11:59:26 AM »
Quote from: phila_dot on June 08, 2011, 02:29:19 PM
How do we enable premium features?

You need to buy a license file from me to enable the premium "Fast Read Flash" and "Fast Write Flash" features.

I haven't finished the main product page for the website yet, so I will update the second post in this thread with info on buying premium licenses.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
s4rmm
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 28
« Reply #6 on: June 14, 2011, 01:26:37 AM »
Tony, any info about premium license?
Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #7 on: June 17, 2011, 10:14:48 AM »
Quote from: s4rmm on June 14, 2011, 01:26:37 AM
Tony, any info about premium license?


^^^^^^^^^^^^

"You need to buy a license file from me to enable the premium "Fast Read Flash" and "Fast Write Flash" features.

I haven't finished the main product page for the website yet, so I will update the second post in this thread with info on buying premium licenses."
Logged
cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
jtorres
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 36
« Reply #8 on: June 23, 2011, 10:03:51 PM »
Do you have something to read the eeprom 95040?

Good work BTW!!
Logged
kenmac
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 161
« Reply #9 on: July 30, 2011, 11:37:02 AM »
Just a quick question about read and write speed.  I was able to read a bin file from the ECU in about 6 minutes.  (ME7.5 MKIV GTI).  However I am in the middle of writing a new file to the ECU and it's taken over 60 minutes so far.

The 1.8.0.0 software information suggest that it should take less time to write than it should to read.  3 and a half minutes (write) vs 5 minutes (read).  I am set to the fastest baud setting, but the long write time makes me think I'm doing something wrong.
Logged
MyTunes
Full Member
***

Karma: +9/-5
Offline Offline

Posts: 83
« Reply #10 on: August 25, 2011, 03:51:12 PM »
Hi Tony,
Any luck on adding the EDC16 ecu's to the software?

Thanks Smiley
Logged
Dutch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #11 on: August 28, 2011, 01:58:32 PM »
Would be nice to see support for the windows xp platform.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #12 on: August 28, 2011, 02:39:07 PM »
I am hoping to add support for Windows XP around the end of September if all goes well.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #13 on: August 28, 2011, 02:40:59 PM »
Quote from: jtorres on June 23, 2011, 10:03:51 PM
Do you have something to read the eeprom 95040?

The ECU prevents you from reading all of the memory sectors of the 95040 eeprom. Reading the eeprom is on the list of future features, and I can already do it. But since I need to add special handling to communicate to the user which sectors can't be read, I have held off on getting this feature done.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #14 on: August 28, 2011, 02:41:42 PM »
Quote from: kenmac on July 30, 2011, 11:37:02 AM
Just a quick question about read and write speed.  I was able to read a bin file from the ECU in about 6 minutes.  (ME7.5 MKIV GTI).  However I am in the middle of writing a new file to the ECU and it's taken over 60 minutes so far.

The 1.8.0.0 software information suggest that it should take less time to write than it should to read.  3 and a half minutes (write) vs 5 minutes (read).  I am set to the fastest baud setting, but the long write time makes me think I'm doing something wrong.

If you post a log file or email me one I can take a look at what may be going wrong.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Pages: [1] 2 3 4
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 11:49:36 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.039 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)