|
Title: LC/NLS Post by: selveti on May 11, 2017, 04:07:55 PM Hi there whatsupp i have a question can you explain me how to run the me7 script launch.php
i am trying to run it from cmd but i cant... do i have to install php software also or what i am doing wrong can anybody explain me a better detail short tutorial, i would appreciate??? thanks you!! Title: Re: LC/NLS Post by: nyet on January 23, 2019, 11:36:29 AM The learning curve is very steep. There is literally no way somebody could write a concise noob guide to disassembly AND patching code.
Most noobs can barely handle modifying maps, let alone making a map pack, let alone writing custom ASM. Do not just blindly run the launch.php script. Do the work. There is no one size fits all LC/NLS solution. You can use it as a reference to see what sorts of ASM changes are needed, but just running it and expecting it to always work is not realistic. If you do not have a working knowledge of both ME7 and assembly, you should not be running the script, period. If you don't know what a php script is, or how to run one, you definitely should not be running the script. Main thread here: http://nefariousmotorsports.com/forum/index.php?topic=607.0title= It has been locked because the only people who post to the thread are asking for someone else to just add LC/NLS to their binaries; they have zero interest in doing any real work or contributing usefully to the thread. If you have actual technical information to contribute, PM me and I will unlock it. Title: Re: LC/NLS Post by: bamofo on January 23, 2019, 02:14:11 PM Where are the resources for learning the addition of 2step lc? Do you have details in this post about your car / ecu / rom ? There are great writeups from nyet on the s4wiki... but you have to at least have the rom apart before you can start changing values. Title: Re: LC/NLS Post by: asrButton on January 25, 2019, 08:35:37 AM Do you have details in this post about your car / ecu / rom ? There are great writeups from nyet on the s4wiki... but you have to at least have the rom apart before you can start changing values. 2000 beetle 5spd 1.8t aph 06A906032C... 512kb map sizes Title: Re: LC/NLS Post by: nyet on January 25, 2019, 11:01:18 AM Do you have any experience writing assembly code? Do you have any experience disassembling binary? It is insane to expect to be able to do this if you don't even have basic ECU mapping experience.
Title: Re: LC/NLS Post by: bamofo on January 25, 2019, 12:10:58 PM 2000 beetle 5spd 1.8t aph 06A906032C... 512kb map sizes You just needed to search a little more with advanced Search. here is the link you will need. someone already did it http://nefariousmotorsports.com/forum/index.php?topic=9184.msg81409#msg81409 Title: Re: LC/NLS Post by: asrButton on January 25, 2019, 12:16:21 PM Do you have any experience writing assembly code? Do you have any experience disassembling binary? It is insane to expect to be able to do this if you don't even have basic ECU mapping experience. I am a software dev... Should be piece of pie. Walk in cake. Slice of park Title: Re: LC/NLS Post by: nyet on January 25, 2019, 12:46:51 PM I am a software dev... Should be piece of pie. Walk in cake. Slice of park In that case http://nefariousmotorsports.com/forum/index.php?topic=607.0title= http://nefariousmotorsports.com/forum/index.php?topic=4721.0title= Title: Re: LC/NLS Post by: adam- on January 25, 2019, 02:07:53 PM Claims it's a walk in cake, but can't use a search bar.
Title: Re: LC/NLS Post by: bamofo on January 25, 2019, 07:35:48 PM Claims it's a walk in cake, but can't use a search bar. I’ve never walked in cake... but it doesn’t sound easy or enjoyable. B6 s4 was one table. Two values. Done. Title: Re: LC/NLS Post by: sanica on January 27, 2019, 10:32:49 AM Hi, I have try to use me7logger to create but it wont run on my pc I have try multiple times through exe and cmd it opens and closes instantly.
Can anyone point me out to right map address for antilag on me7.5 Antilag or hardcut limiter anything of that would be good, I also have winols and damos for it. Or if someone can make it for me and I will compare it later Mappack and file from ecu are in attachment Title: Re: LC/NLS Post by: Blazius on January 27, 2019, 11:51:58 AM You wont get readily made finals maps and codes unless you pay someone. Me7log itself is a cmd program , you need a gui for it.
Donwload visual me7 logger from logging section. Title: Re: LC/NLS Post by: Gacekk on January 31, 2019, 05:34:44 AM I'm searching for a help..
i use php srypt 0.5 to LC. I need to inverse clutch pedal work. Second I need to change from clutch pedal to brake pedal for activate LC. I opened launch.php in notepad++ but i don't know what I have to change for do it. Can u help me with it? Title: Re: LC/NLS Post by: stuartdean on February 03, 2019, 09:08:55 AM I couldn't get me7logger working on my AMK S3, but it worked perfectly on my BAM TT - something to do with k-line not routed directly to the port causing issues.
if you look at s4wiki it shows some of these mapping toys, but it can break your car unless you have suitable hardware, eg turbo, valves, rods, cat, maf, coils, plugs may get damaged Title: Re: LC/NLS Post by: nyet on February 03, 2019, 11:11:11 AM Can anyone point me out to right map address for antilag on me7.5 Merged into master lazy noob thread. Please start from page 1 before posting lc/nls questions again. Title: Re: LC/NLS Post by: luketomo on February 05, 2019, 03:55:41 AM Hi all having a problem with checksums now car wont start has could someone help with checksums as iv read winols dont correct them?
Title: Re: LC/NLS Post by: nyet on February 05, 2019, 09:55:15 AM Did you bother reading any of the stickies? Did you check it with me7check or me7sum? Are you sure the problem is checksums? What DTCs are you getting? Did you add LC/NLS? If so, did you try removing LC/NLS?
Title: Re: LC/NLS Post by: adam- on February 05, 2019, 10:39:46 AM That is the only change on that file. Only "launch".
Title: Re: LC/NLS Post by: Blazius on February 05, 2019, 10:42:07 AM Did you add LC/NLS? If so, did you try removing LC/NLS? lmao. Title: Re: LC/NLS Post by: nyet on February 05, 2019, 10:45:55 AM Merged into master lazy noob thread. Please start from page 1 before posting lc/nls questions again.
Title: Re: LC/NLS Post by: Freddwood on February 11, 2019, 01:23:59 PM So I implemented Launch/NLS via the script into my bin to test it.
I set the LaunchRPM to 4500. Everything else is shown in the picture below. The problem now is that the car does not hold the RPM at 4500 while the clutch is being pushed down to the floor. However in the range from 4500 and everything above the car starts cutting ignition, but I have to hold the RPM by myself with the pedal. Anyone had this issue before? ::) Original/Changed BIN and xdf are below. Title: Re: LC/NLS Post by: Freddwood on February 11, 2019, 01:33:37 PM Launch/NLS settings.
Title: Re: LC/NLS Post by: nyet on February 11, 2019, 01:38:15 PM Launch/NLS settings. Merged into master lazy noob thread. Please start from page 1 before posting lc/nls questions again. Title: Re: LC/NLS Post by: Tasos on February 17, 2019, 06:32:47 AM I have a problem i used almost everything and i cant make the antilag work on s3 8l 8n0906018bh i have posted the files that i use please see them and tell me whats going on. i used the autoscript method.
Title: Re: LC/NLS Post by: nyet on February 17, 2019, 04:41:46 PM I have a problem i used almost everything and i cant make the antilag work on s3 8l 8n0906018bh i have posted the files that i use please see them and tell me whats going on. i used the autoscript method. Merged your post with the noob thread. Read the whole thing before posting again. From page one to here. Title: Re: LC/NLS Post by: Tasos on February 18, 2019, 12:34:41 AM Ok I have read so much and I can’t understand what I am doing wrong with this file it bricked the ecu
Title: Re: LC/NLS Post by: nyet on February 18, 2019, 02:24:08 AM Ok I have read so much and I can’t understand what I am doing wrong with this file it bricked the ecu Yes. Don't use the script unless you know ASM, as was pointed out over, and over, and over, and over again. Title: Re: LC/NLS Post by: adam- on February 18, 2019, 07:37:13 AM Did you use the script for no bricks?
Title: Re: LC/NLS Post by: Freddwood on February 18, 2019, 08:08:47 AM So I implemented Launch/NLS via the script into my bin to test it. I set the LaunchRPM to 4500. Everything else is shown in the picture below. The problem now is that the car does not hold the RPM at 4500 while the clutch is being pushed down to the floor. However in the range from 4500 and everything above the car starts cutting ignition, but I have to hold the RPM by myself with the pedal. Anyone had this issue before? ::) Original/Changed BIN and xdf are below. The problem appeared to be due to FTMON being zero. Since I changed it back 0.1/1 it works like it´s intended. Title: Re: LC/NLS Post by: tedi509 on March 02, 2019, 12:58:53 PM Hello, Anyone can help me with popcorn rev limiter ? The car is LCR 1M 1.8t.
Tried to make it with no luck. Can anyone give adresses to maps whitch need to be changed? thanks in advance. Title: Re: LC/NLS Post by: ZakDodge on March 02, 2019, 01:00:16 PM Use search in nefmoto. There’s a thread called ME7 hard limiter or something. Pretty much all the information you need is in there.
Sent from my iPhone using Tapatalk Title: Re: LC/NLS Post by: ZakDodge on March 02, 2019, 01:02:06 PM “Ignition cut rev limiter ME7”
Sent from my iPhone using Tapatalk Title: Re: LC/NLS Post by: nyet on March 02, 2019, 09:13:43 PM Hello, Anyone can help me with popcorn rev limiter ? The car is LCR 1M 1.8t. Tried to make it with no luck. Can anyone give adresses to maps whitch need to be changed? thanks in advance. Merged with noob faq. Read the whole thing from start to finish. Title: Pops&Bangs MED9.1 sport mode Post by: Charon on March 04, 2019, 10:01:31 AM Hello Guys,
i wanted to have Pops&Bangs on my Mk5 GTI, but only in sport mode. Which maps i have to change for that? sorry for my bad english :-\ Title: Re: Pops&Bangs MED9.1 sport mode Post by: nyet on March 04, 2019, 11:28:30 AM Hello Guys, i wanted to have Pops&Bangs on my Mk5 GTI, but only in sport mode. Which maps i have to change for that? sorry for my bad english :-\ Merged with noob faq. Read the whole thing from start to finish. Title: LC and Non lift shift Post by: mechtronic on April 22, 2019, 05:01:14 PM Hi
I have a Porsche 996.TT with mE7.8 File that I need help to tune it for LC and no lift Shift. We are looking drag race the car on 1/4 drag races. WE use to race same car on half mile races but now are doing 1/4 mile race prep. I don't want to post it in the wrong place. Please advise me the best place to get the support I need to do this file tune project and supply the info I need to post like the file to be tune etc. Thanks again Title: Re: ME7.8 LC and Non lift shift Post by: nyet on April 22, 2019, 09:52:57 PM http://nefariousmotorsports.com/forum/index.php?topic=9014
http://nefariousmotorsports.com/forum/index.php?topic=14597.0title= http://nefariousmotorsports.com/forum/index.php?topic=4721.0title= http://nefariousmotorsports.com/forum/index.php?topic=12559.0title= Title: Re: LC and Non lift shift Post by: Rick on April 23, 2019, 09:22:34 AM Where are you based?
Title: Re: LC and Non lift shift Post by: gt-innovation on April 23, 2019, 10:28:23 AM Hi I have a Porsche 996.TT with mE7.8 File that I need help to tune it for LC and no lift Shift. We are looking drag race the car on 1/4 drag races. WE use to race same car on half mile races but now are doing 1/4 mile race prep. I don't want to post it in the wrong place. Please advise me the best place to get the support I need to do this file tune project and supply the info I need to post like the file to be tune etc. Thanks again I can do that. Title: Re: LC and Non lift shift Post by: mechtronic on April 25, 2019, 05:33:57 PM Title: Re: LC and Non lift shift Post by: mechtronic on April 25, 2019, 05:39:03 PM Hi Thanks Puerto Rico Hi Thanks! You can help? Car is Porsche 996 T T Bosch ME7.8. Let me know how we can start working on it. And what else you need start the project. Title: Re: LC and Non lift shift Post by: _nameless on April 26, 2019, 05:10:21 AM how bout an original file?
Title: Re: Re: LC and Non lift shift Post by: mechtronic on April 26, 2019, 07:39:55 AM Ok I will get the org file
Title: Re: LC and Non lift shift Post by: mechtronic on April 26, 2019, 07:47:48 AM Hi,
Here is my Org file, Please let me know what else you will need. Thanks again, Title: Re: LC and Non lift shift Post by: mechtronic on April 26, 2019, 09:24:36 AM how bout an original file? Sorry did I sent you the file I think I do it but dont see it on your post? Title: Re: Launch Control & No Lift Shift new Functions Post by: aemtuning on May 22, 2019, 10:48:05 AM Hello friends
Can somebody help me with nls an d lc .i try but not work audi tt 225hp quattro thanks in advance ori and mod atached Title: Re: Launch Control & No Lift Shift new Functions Post by: nyet on May 22, 2019, 10:57:38 AM Hello friends Can somebody help me with nls an d lc .i try but not work audi tt 225hp quattro thanks in advance ori and mod atached Moved and merged to the correct place, which you didn't bother checking first. Title: Re: Launch Control & No Lift Shift new Functions Post by: vaxito on May 22, 2019, 04:19:39 PM Good excuse my translation (I'm Spanish)
Lev several days reading the post but since I'm new to this and that the translation of google my wrong a lot I'm not able to run this system in my car ... It is an ibiza cupra 1.8t 150cv already remapped. As a contribution I give my file have if someone can implement nls and launch because I am not able ... Title: Re: Launch Control & No Lift Shift new Functions Post by: nyet on May 22, 2019, 04:22:25 PM Good excuse my translation (I'm Spanish) Lev several days reading the post but since I'm new to this and that the translation of google my wrong a lot I'm not able to run this system in my car ... It is an ibiza cupra 1.8t 150cv already remapped. As a contribution I give my file have if someone can implement nls and launch because I am not able ... Moved and merged to the correct place, which you didn't bother checking first. Title: me7.5 launch control als nls Post by: kilobaid on June 13, 2019, 10:17:42 AM Hello everyone, i have a TT 1.8 AJQ 180PS (Euro 2)
after using launch.php it gaves me a error. Any ideea? thanks Ident - '0261207027' (SSECUHN) - '1037354503' (SSECUSN) - '8N0906018AB ' (VAG part number) - '0002' (VAG sw number) - '1.8L R4/5VT ' (engine id) Memory Layout: 29F400 Found Found usable status flag variable at 0x00FD98 FTOMN found: 16337 FTOMN IS: 05 FTOMN CHANGED TO 0x00 Using space given by argument for code cave.. space located at: 0x1 Finding a good space for launch control configuration variables.. cannot find space for configuration variables, please input offset by argument! Thanks! Title: Re: LC/NLS Post by: nyet on June 13, 2019, 11:04:33 AM Bad first post.
Did you bother reading ANY of the other NLS threads? merged with the main noob thread. Read the whole thing before posting again. Title: Re: LC/NLS Post by: Blazius on June 13, 2019, 11:13:49 AM Bad first post. Did you bother reading ANY of the other NLS threads? merged with the main noob thread. Read the whole thing before posting again. Wait how did he get -10 karma with 1 post , i bet you gave it :D Title: LC/NLS problem - 8E0909518AQ - 1.8t BFB Post by: idzioch on June 24, 2019, 03:16:47 AM Hi,
Can someone check my file? LC and NLS don't work. I've never had this problem before. Clutch switch signal checked, coolant temp ~90℃ and acc pedal position sensor reach 100%. It seems to be a problem with my file. Files in attachment. Title: Re: LC/NLS problem - 8E0909518AQ - 1.8t BFB Post by: Blazius on June 24, 2019, 03:34:46 AM Hi, Can someone check my file? LC and NLS don't work. I've never had this problem before. Clutch switch signal checked, coolant temp ~90℃ and acc pedal position sensor reach 100%. It seems to be a problem with my file. Files in attachment. Who added LC to this file? Title: Re: LC/NLS problem - 8E0909518AQ - 1.8t BFB Post by: idzioch on June 24, 2019, 04:27:29 AM Who added LC to this file? maZer.GTi automatic script... http://nefariousmotorsports.com/forum/index.php?topic=4721 Title: Re: LC/NLS problem - 8E0909518AQ - 1.8t BFB Post by: nyet on June 24, 2019, 08:45:44 AM maZer.GTi automatic script... http://nefariousmotorsports.com/forum/index.php?topic=4721 Moved and merged to the correct place, which you didn't bother checking first. Title: Executing the automatic NLS script Post by: SQT on June 28, 2019, 03:57:34 AM Hi guys, who has the opportunity to help with the execution of an automatic NLS script for the standard allroad 4b0907551m version. I need this to understand the code, I don’t have the opportunity to install php to execute the script. Experience in ASM no, or not worth trying? Thank you in advance
Title: Re: Executing the automatic NLS script Post by: nyet on June 28, 2019, 07:26:27 AM Hi guys, who has the opportunity to help with the execution of an automatic NLS script for the standard allroad 4b0907551m version. I need this to understand the code, I don’t have the opportunity to install php to execute the script. Experience in ASM no, or not worth trying? Thank you in advance No. Merged to the master thread. Title: Re: LC/NLS Post by: SQT on June 29, 2019, 12:36:17 AM I understood everything, I will not raise this topic anymore
Title: NLS not work Post by: tao13 on July 28, 2019, 10:15:37 PM Hi all.
I wrote the function in my ecu file from (8N0906018H - 0004 version - maybe this is a problem) audi tt BAM engine, at AAFEC address and variables begin from 17D00 Ftomn - 0 Ignition cut duration - 200 Launch rpm 4500 SpeedThreshold 5km/h RPMThreshold - 5500 AccelPed - 90% CoolantTemp - 75degree LAUNCH works ok but NLS don't work. The car running like without NLS in any gear. Cluch and throttle sensors are ok. I attached my file and ecu def. If somebody had an ideea please give me your advice. Many thanks in advance for your time. Title: Re: NLS not work Post by: nyet on July 28, 2019, 10:24:38 PM Dump the ASM you actually wrote, and describe what each line is trying to do.
Title: Re: NLS not work Post by: SQT on July 29, 2019, 01:02:38 AM Hi all. hi tao13, do you have a cutoff?I wrote the function in my ecu file from (8N0906018H - 0004 version - maybe this is a problem) audi tt BAM engine, at AAFEC address and variables begin from 17D00 Ftomn - 0 Ignition cut duration - 200 Launch rpm 4500 SpeedThreshold 5km/h RPMThreshold - 5500 AccelPed - 90% CoolantTemp - 75degree LAUNCH works ok but NLS don't work. The car running like without NLS in any gear. Cluch and throttle sensors are ok. I attached my file and ecu def. If somebody had an ideea please give me your advice. Many thanks in advance for your time. Title: Re: NLS not work Post by: tao13 on July 29, 2019, 10:09:24 PM hi
i wrote the function directly in winols as hex values not used the asm i used the pdf from nefmoto SQT - i think you refer to ignition cut duration and if yes it is 200ms thanks again Title: Re: NLS not work Post by: nyet on July 29, 2019, 10:35:56 PM i wrote the function directly in winols as hex values Why did you do that instead of doing your own ASM? Merged with master moron thread Title: B5 s4 2.7t tuning/xdf file? Tuner pro Post by: Sparechris987 on July 29, 2019, 10:57:23 PM Hey guys so ive been looking around on here trying to find a xdf file for my 01 s4 I believe it’s a H box I bought a tune threw a guy on instagram for 150$ for stage 2, Egt delete, rear o2 delete and anti lag also converted my box to a M box aka what VCDS SAYS but when I got to do anti lag I start pinging really bad I tried talking to the guy about how I think it’s the tune and he keeps swearing up and down it’s not the tune something’s wrong with my car I’m a tech at a dealer not saying I know everything about my car but I’d know if my car has somthing wrong with it I was trying to be right I downloaded tuner pro went to the s4 wiki and got the Xdf file they have on there website and took it into tuner pro along with his tune was looking around it getting very confused lol but one thing I was trying to do was add more fuel during anti lag because I think I’m running lean I added a octane booster hoppling for a better result in my car but nope so basically was wondering if someone can help me out with the right XDF an tuning anti lag and fueling chart because I don’t know how to yet also the wiki was saying I need a check sum to correct the tune or the car won’t sart? Any info appreciated maybe even Stop using tuner pro idk noob over here just want anitlag and no lift shift lol thanks you guys sorry if it’s a sheeet show here
Title: Re: B5 s4 2.7t tuning/xdf file? Tuner pro Post by: nyet on July 29, 2019, 11:02:01 PM Hey guys so ive been looking around on here trying to find a xdf file for my 01 s4 I believe it’s a H box I bought a tune threw a guy on instagram for 150$ for stage 2, Egt delete, rear o2 delete and anti lag also converted my box to a M box aka what VCDS SAYS but when I got to do anti lag I start pinging really bad I tried talking to the guy about how I think it’s the tune and he keeps swearing up and down it’s not the tune something’s wrong with my car I’m a tech at a dealer not saying I know everything about my car but I’d know if my car has somthing wrong with it I was trying to be right I downloaded tuner pro went to the s4 wiki and got the Xdf file they have on there website and took it into tuner pro along with his tune was looking around it getting very confused lol but one thing I was trying to do was add more fuel during anti lag because I think I’m running lean I added a octane booster hoppling for a better result in my car but nope so basically was wondering if someone can help me out with the right XDF an tuning anti lag and fueling chart because I don’t know how to yet also the wiki was saying I need a check sum to correct the tune or the car won’t sart? Any info appreciated maybe even Stop using tuner pro idk noob over here just want anitlag and no lift shift lol thanks you guys sorry if it’s a sheeet show here Merged with master NLS thread. If you really want help with pinging, ditch the NLS and fix that. Don't bother with NLS. Throw it out and dont look back. 99.9999999% of tunes have a buggy useless version patched in via a script they have zero clue what is doing. Once you ditch NLS, post logs of any remaining issues here, and we will try to help. Title: NLS crap Post by: mutzicu on August 09, 2019, 10:14:42 AM I was trying today to activate LC. I've read the 39 page topic twice but I can't get it properly working.
I have the small 512kB bin... Managed to use the launch.php script. It works, partially, as it starts the ignition cut, but then it won't old rpm as it's supposed to... it goes to redline. It's extremely frustratiing... spent over 8 hours around it with no luck... NLS seems to be working though. I've attached a log with the relevant variables, also the variable settings. Script works well, had to specify some adresses though: launch.php ecu.bin dump.bin 0x74fc0 0x7A000 finding tsrldyn... found: 380C2C finding vfil_w... found: 380CAA finding nmot_w... found: 00F874 finding wped... found: 380A56 finding tmotlin... found: 384881 finding B_kuppl (clutch pedal)... found: 00FD42.2 finding b_br (brems), brake pedal... found: 00FD40.14 Memory Layout: 29F400 Found Found usable status flag variable at 0x00FD98 FTOMN found: 16337 FTOMN IS: 05 FTOMN CHANGED TO 0x00 Using space given by argument for code cave.. space located at: 0x74fc0 Using space given by argument for launch control configuration variables.. space located at: 0x7a000 using 0x384FF0 for NLS Counter variable Finding the offset for call to the code cave.. call will be located at: 0x73f6e I have tried varios combinations with FTOMN 00, 01, 02 - all without success.... Script used is from github Any ideas? Title: Re: LC/NLS Post by: nyet on August 09, 2019, 10:38:49 AM Split, merged with master thread.
Title: Re: LC/NLS Post by: mutzicu on August 09, 2019, 12:00:26 PM There's no rush replying to my previous post... I will probably need one day to recover my recently bricked ecu LOL
Title: Re: LC/NLS Post by: mutzicu on August 10, 2019, 06:04:55 AM Situation saved, bricked ecu recovered.... now getting back to the 2 step?
Title: Re: LC/NLS Post by: nyet on August 10, 2019, 08:49:23 AM Situation saved, bricked ecu recovered.... now getting back to the 2 step? Have you read the whole thread here? Title: Need Launch control and antilag for 1,8T AWP Post by: miranok1992 on August 20, 2019, 12:30:55 PM Please need Launch control and antilag for 1,8T ecu 06A906032LP 0261207955 367518.
Title: Re: Need Launch control and antilag for 1,8T AWP Post by: nyet on August 20, 2019, 12:34:13 PM Please need Launch control and antilag for 1,8T ecu 06A906032LP 0261207955 367518. Split, merged with master thread. Not a great start. Title: Lunch control for ECU 8E0909518AF_363573 Post by: shelev on August 30, 2019, 12:35:02 AM Hello !
Please help implement lunch control for ECU 8E0909518AF_363573. I tried to do this using Launch.PHP, but Launch either does not work, or the machine stops starting at all and shows a checksum error. Title: Re: Lunch control for ECU 8E0909518AF_363573 Post by: shelev on August 30, 2019, 12:38:41 AM work lunch php
Title: Re: Lunch control for ECU 8E0909518AF_363573 Post by: Blazius on August 30, 2019, 02:26:16 AM nice lunch
Title: Re: Lunch control for ECU 8E0909518AF_363573 Post by: _nameless on August 30, 2019, 05:07:58 AM Hello ! try searching the forum. at least 3-5 other threads exist outlining exactly why and what needs to be done to fix it. Please help implement lunch control for ECU 8E0909518AF_363573. I tried to do this using Launch.PHP, but Launch either does not work, or the machine stops starting at all and shows a checksum error. Title: Re: LC/NLS Post by: nyet on August 30, 2019, 08:18:38 AM Merged with master moron thread
Title: Faulty LC Patch in XDF? Post by: Swakefield on September 01, 2019, 09:09:42 PM I was given this xdf from a friend who i believe got it through here somewhere. It has been FANTASTIC and ive been making small modifications to make it work for me (just name changes and translations, soon ill be organizing folders).
My issue, is that it has a LC Patch built into it, that is causing a checksum error after a couple of drive cycles. I apply the patch, correct the checksums, and then drive the car and after a couple/few drive cycles, it triggers a checksum error and i have to reflash it. Its not the "programming incomplete" DTC. Can anyone give me an idea as to whats going on? When i remove the patch, correct checksums, and flash, I have zero problems. Drove over 1000 miles without reflashing and had no checksum problems, its ONLY when the LC patch it applied. Thanks in advance! .xdf is attached. Title: Re: Faulty LC Patch in XDF? Post by: nyet on September 01, 2019, 11:00:05 PM RSA. Ditch LC.
Title: Re: Re: Faulty LC Patch in XDF? Post by: Swakefield on September 02, 2019, 01:37:27 PM RSA. Ditch LC. Rsa?? What? Sent from my SM-N960U using Tapatalk Title: Re: LC/NLS Post by: nyet on September 02, 2019, 04:17:25 PM That scraptastic script interferes with RSA signature checking.
Start from page 1, read this whole thread. Title: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: jaremyhawk on September 03, 2019, 12:04:33 AM hey there guys ive been trying to add 2step to my stage 1 tune file for a while now and nothings working can someone help me out?
ive included a damos file for my ecu heres the info.. 2step at 4300rpm and no lift shift at 5500rpm any help is much appreciated Thanks -jaremy [Identification] HWNumber = {0261206814} SWNumber = {1037381495} PartNumber = {021906018R } SWVersion = {6762} EngineId = {MOTRONIC ME7.1 ) Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: _nameless on September 03, 2019, 06:26:42 AM Why do need 2 step on a naturally aspirated car?
Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: nyet on September 03, 2019, 07:57:11 AM Why do need 2 step on a naturally aspirated car? This x 1000 Also moved to master thread. Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: jaremyhawk on September 03, 2019, 10:17:52 AM Why do need 2 step on a naturally aspirated car? to minimize wheel spin they both have the same function right? Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: nyet on September 03, 2019, 01:11:23 PM to minimize wheel spin they both have the same function right? No. 2 step LC has nothing to do with wheel spin. You're thinking of traction control, which is not what this LC does. Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: Swakefield on September 03, 2019, 06:12:29 PM No. 2 step LC has nothing to do with wheel spin. You're thinking of traction control, which is not what this LC does. Actually technically LC on NA Cars is specifically to prevent wheelspin. The idea is that it will have it hold idle at the highest rpm that you can launch from with minimal/zero wheel spin. At least thats what I've always seen. Had a friend with a challenger (NA) and it came factory with LC. Antilag? Now THAT would serve no purpose on an NA car. Title: Re: LC/NLS Post by: jaremyhawk on September 03, 2019, 06:26:38 PM ^ thanks
now an update on the LC NLS issue... no lift shift is working confirmed this when some dodge cummins tried pulling on me (took it to gapplebees ) i believe its been set at 5500 interesting enough i think lc is semi working but is set at 6000 rpm? has anyone gotten this working on a vr6 12v? me7.1 Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: nyet on September 03, 2019, 11:56:37 PM Actually technically LC on NA Cars is specifically to prevent wheelspin. The idea is that it will have it hold idle at the highest rpm that you can launch from with minimal/zero wheel spin. The topic here is specifically 2 step LC, not traction control. Traction control in ME is an entirely different function. Title: Re: LC/NLS Post by: nyet on September 03, 2019, 11:57:04 PM ^ thanks now an update on the LC NLS issue... no lift shift is working confirmed this when some dodge cummins tried pulling on me (took it to gapplebees ) i believe its been set at 5500 interesting enough i think lc is semi working but is set at 6000 rpm? has anyone gotten this working on a vr6 12v? me7.1 Please read the whole thread from the start. There is a reason I merged your post. I have also updated post #3 since apparently bold and red is not obvious enough. Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: Blazius on September 04, 2019, 12:21:11 AM to minimize wheel spin they both have the same function right? No. LC is to build boost off the start line so you dont get boost lag, as that you would cost you important miliseconds or seconds for racecars. Antilag is basically the same only that its active while the car is rolling and your foot is off the accelerator to keep the turbine spinning. Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: nyet on September 04, 2019, 12:23:33 AM No. LC is to build boost off the start line The problem is that the term "LC" is used to mean many different things depending on context. You're wasting your time on a purely semantic argument. In *THIS* thread, LC means both building boost and holding launch RPM right before launch, not traction control. Title: Re: 2 step add help tried (setzi62) launch control auto add script no luck me7.1 Post by: Blazius on September 04, 2019, 12:38:11 AM The problem is that the term "LC" is used to mean many different things depending on context. You're wasting your time on a purely semantic argument. In *THIS* thread, LC means both building boost and holding launch RPM right before launch, not traction control. Well yes people call TC and other things things like ALS launch control too. But LC must hold hold a spool RPM to retain the boost too, so by definition you are at a "launch" RPM, RPM holding "launch control" without ignition retard in my books is called soft launch control. But yes its a waste time to argue about stupid stuff like this. The only reason you'd want launch control in an NA car is to impress your friends thats all IMO. Title: VR6 ME 7.1.1 LC+ALS Post by: LuckkyLuke on October 23, 2019, 01:21:10 PM Hi, Can you help me, please? I need LC +ALS for the ECU, VW Jetta VR6 ME7.1.1
I am tested, but not start car. Checksum is OK. Thank you very much. Title: Re: VR6 ME 7.1.1 LC+ALS Post by: ZakDodge on October 23, 2019, 01:32:07 PM Post the original file please
Title: Re: VR6 ME 7.1.1 LC+ALS Post by: LuckkyLuke on October 23, 2019, 01:44:11 PM Post the original file please The original file is attached. Title: Re: VR6 ME 7.1.1 LC+ALS Post by: Kompiesto on October 24, 2019, 02:30:55 AM if is ST10 ecu You need do ASM mods.
Title: Re: VR6 ME 7.1.1 LC+ALS Post by: LuckkyLuke on October 24, 2019, 02:53:05 AM if is ST10 ecu You need do ASM mods. What is ASM mods. Where can I find a description? Thank you very much. Title: Re: VR6 ME 7.1.1 LC+ALS Post by: adam- on October 24, 2019, 04:52:26 AM What is ASM mods. Where can I find a description? Yeaaaahhh, with that question, you're gonna be up shit creek with no paddle. Title: Re: VR6 ME 7.1.1 LC+ALS Post by: _nameless on October 24, 2019, 05:00:29 AM this is not st10 fwiw
Title: Re: LC/NLS Post by: nyet on October 24, 2019, 09:04:48 AM Merged with master "I ABSOLUTELY HAVE TO HAVE LC" noob thread
Title: Re: LC/NLS Post by: LuckkyLuke on October 24, 2019, 01:07:40 PM Probably nobody will help.
:-) Title: Re: LC/NLS Post by: BlackT on November 12, 2019, 01:28:01 AM At many places it have warning that LC/NLS will burn coil pack, or output in ECU...
LC/NLS sets tsrldyn = 0, what schould be dwell time set to zero. Acording to that when tsrldyn is set to 0, there schould not be output voltage from ECU to charge coils. So how that can burn anything? Title: Re: LC/NLS Post by: gt-innovation on November 12, 2019, 07:41:08 AM At many places it have warning that LC/NLS will burn coil pack, or output in ECU... LC/NLS sets tsrldyn = 0, what schould be dwell time set to zero. Acording to that when tsrldyn is set to 0, there schould not be output voltage from ECU to charge coils. So how that can burn anything? That is only specific to the code that floats around here and only for old coilpacks and 29f400 ecus... There are many ways to build boost and make a proper lc with 0 impact on the engine reliability... of course if you need flames and stuff on stock turbo and engine at so point you need to replace both of them but again if done correctly most of the things will last long enough... st10 or not code does the same thing on retard the ignition through the array or any other algorithm and do fuel or ignition cut at +100 or 150 rpm. You can set the boost while doing that and deactivate b_kr or dmd algorithms while you are running the code. i have posted something on st10 thread which applies to older me7.1.1 with c167 as well... More help you will not get for free...So help yourself by reading around here Title: Re: LC/NLS Post by: BlackT on November 12, 2019, 10:15:12 AM That is only specific to the code that floats around here and only for old coilpacks and 29f400 ecus... Hmm I think you didn't understand my question. I was only asking about coils and Mosfets in ECU. Not about build boost,flames, engine reliability or something else.There are many ways to build boost and make a proper lc with 0 impact on the engine reliability... of course if you need flames and stuff on stock turbo and engine at so point you need to replace both of them but again if done correctly most of the things will last long enough... st10 or not code does the same thing on retard the ignition through the array or any other algorithm and do fuel or ignition cut at +100 or 150 rpm. You can set the boost while doing that and deactivate b_kr or dmd algorithms while you are running the code. i have posted something on st10 thread which applies to older me7.1.1 with c167 as well... More help you will not get for free...So help yourself by reading around here When we set tsldyn to zero that mean mosfet in ECU is like open switch? Title: can somebody help me with a tune me7.5 1.8t leon auq Post by: dimitry00 on November 20, 2019, 05:47:50 AM can somebody help me tune my file its for a auq 180hp engine 1.8t former owner said it was Already chipped but i whant some options along with it pops and bangs and launch control so if someone could help me with a file i can put in vag ecd myself and tune it myself or tune one for me that would be great because im stuck on having no definitions for the file and thus cannot see what im actually editting i do know what to edit just not the xdf file if someone could make me 2 tuned files 1 with launch control and the other with launch control and pops and bangs that would be great motor is stock no downpipe or other turbo yet
Title: can somebody help me with a tune me7.5 1.8t leon auq Post by: dimitry00 on November 20, 2019, 05:49:55 AM can somebody make a tune file or xdf file something to put in vag ecd or tuner pro to so i can edit myself or tune the file for me 2 files one with launch control and the other with both launch control and pops and bangs please im really stuck at the xdf not knowing what to do
Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: _nameless on November 20, 2019, 06:05:18 AM Sure here you go
Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: dimitry00 on November 20, 2019, 06:26:03 AM forgot the bin file
Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: woj on November 20, 2019, 06:28:04 AM forgot the bin file Also lots of punctuation marks :/ Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: dimitry00 on November 20, 2019, 06:38:39 AM Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: dimitry00 on November 20, 2019, 08:21:25 AM Sure here you go could you help me tune the file for me Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: aef on November 21, 2019, 12:09:40 AM try flashing 363908 file on your ecu
there is a damos/mappack available Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: dimitry00 on November 21, 2019, 05:39:22 AM try flashing 363908 file on your ecu there is a damos/mappack available why should i flash that file i just need my file tuned with launch control and hard cut Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: IamwhoIam on November 21, 2019, 06:34:48 AM I think you didn't get the fact that this purpose of this forum is not for people to come on and request for others to tune their files, but to learn how an ECU works and to do the tune themselves. You may find someone who will do your tune for you here, but most of the users here aren't here to spoon feed n00bz like you who get on here and just ask for a ready product.
Title: Re: can somebody help me with a tune me7.5 1.8t leon auq Post by: Blazius on November 21, 2019, 10:36:09 AM why should i flash that file i just need my file tuned with launch control and hard cut If you "need" that then go to the services subforum. Title: Re: LC/NLS Post by: nyet on November 21, 2019, 01:30:03 PM Merged with the master moron thread.
Title: Re: LC/NLS Post by: RBPE on November 24, 2019, 11:22:51 PM Title: ME7.5 LC/NLS flash failure, car still runs. Post by: Sandstorm3k on December 02, 2019, 04:40:36 AM Hello there, let me introduce myself. I got my first car a year ago, a 1.8 125hp leon 1m. I liked it a lot and decided to save up for a nice 1.8T 1M which i have now. The car had been chipped by two local dutch companies before, both of which i have the dyno runs. It puts down around 260HP which is plenty for an FWD car imo. Anyway, i got totally hooked on the idea of tuning my own car. I have some experience with programming (HTML5, PHP, C#) so i figured i could learn this aswell. I started doing a lot of research and got into "tuning" some stock ECU files i'd gotten off the internet just for the purpose of learning. Now i ofcourse also came across this amazing website which has tons and tons of useful information.
Anyway, last week i read some stuff about the apparantly very popular LC/NLS/2step script. So i decided to get more into it and read about the subject, pro's and con's and so on you guys probably know alot more than i do. I read my ECU bin using a Kess V2, no problems there. Then i proceeded to add the launch.php script also no problems there, and finally corrected the checksums as one should. It all seemed to be perfectly fine and i checked the file in a hex editor and didn't see anything that looked extremely unusual to me *im still a noob on the subject though*. Also i used both a MPPS device and KESS v2 to read the ECU just to be certain the two files were equal. Now when i decided to flash my car i took all the correct precautions, disabled all possible electronics and hooked up a battery charger to the car and to my laptop. Now strangely when i wanted to flash the new file it failed at just 2% into the flash and i followed the next steps KSuite gave me. I thought i'd totally messed up my ECU but strangely my car still functions completely fine even though the flash failed. (Requesting ID and Reading the ECU before was no problem though). Now my question is if there is anyone who can help me in the right direction into what possibly might have gone wrong. Im not asking anyone to modify the BIN for me because i really just want to learn how to do it properly myself. Right now i don't really want to try again considering i might just brick my ECU alltogether. Help would be greatly appreciated! Thanks in advance. (If requested i could add my original file and the edited one) if that might help into finding what went wrong. Title: Re: LC/NLS Post by: nyet on December 02, 2019, 09:57:54 AM Merged with master NLS/LC thread.
Ditch NLS/LC unless you are able to do the ASM patches yourself, from scratch. Title: Re: LC/NLS Post by: Sandstorm3k on December 03, 2019, 07:06:53 AM Merged with master NLS/LC thread. Ditch NLS/LC unless you are able to do the ASM patches yourself, from scratch. Very well, i am interested in doing so myself. I don't understand why such a script is "popular" when many people discourage you from using it. Nevertheless where would one start on doing manual patches? Is it as simple as just blindly following this thread http://nefariousmotorsports.com/forum/index.php?topic=607.0title= and adding the exact same changes or is there more to it if so would you have any sources where i can learn more about it Title: Re: LC/NLS Post by: nyet on December 03, 2019, 11:59:44 AM Very well, i am interested in doing so myself. I don't understand why such a script is "popular" when many people discourage you from using it. Because the demographic that desperately wants NLS/LC for free generally isn't smart enough to listen. I don't know how on earth you suggest me changing that. Title: Re: LC/NLS Post by: nyet on December 03, 2019, 01:21:07 PM Is it as simple as just blindly following this thread http://nefariousmotorsports.com/forum/index.php?topic=607.0title= and adding the exact same changes or is there more to it if so would you have any sources where i can learn more about it The first page of this thread has links to what you are looking for. Be advised, it isn't easy to get right. Title: Re: LC/NLS Post by: Sandstorm3k on December 18, 2019, 07:18:18 AM Because the demographic that desperately wants NLS/LC for free generally isn't smart enough to listen. I don't know how on earth you suggest me changing that. I guess not, but it did seem like an excellent easy solution. Will definitely read into the subject more, thanks for the link. Title: Audi S3 1.8 20VT (210cv) I need LC and NLS Post by: Frank-SG on December 30, 2019, 05:15:39 PM II need Launch Control (5000) (40km/h) and NLS.
File of 512kbs (from Audi S3 (210)) Title: Re: Audi S3 1.8 20VT (210cv) I need LC and NLS Post by: BlackT on December 30, 2019, 05:34:39 PM Here you go
Title: Re: Audi S3 1.8 20VT (210cv) I need LC and NLS Post by: nyet on December 30, 2019, 06:10:56 PM Title: Re: LC/NLS Post by: nyet on December 30, 2019, 06:12:25 PM Merged with the master fuckstick thread
Title: 1.8T 20v MK4 GTi Launch Control + Pop & Bang on Decel Help? Post by: AstonWaddo on January 02, 2020, 04:40:33 PM Hi, not very good with mapping the ME7.5 only ever messed about with diesels
was wondering if someone could help me with putting launch control and pop and bang on decel on the attached file thanks ;D Title: 022906032E ME7.1 Need help finding maps Post by: ebugauge on January 11, 2020, 04:54:33 AM Hi,
I really would like to have a launch cortrol in my 2.8 VR, but I have problems to find some maps. The locations I have tried didn't work since it never revs higher than the lower RPM limit. I attached my .ols file, maybe it could help you finding the missing maps. I would be very thankful if someone could help me. I can't find: ITNMXH TNMXH FTOMIN ESKONF Greeting :) Title: Re: 022906032E ME7.1 Need help finding maps Post by: dilly on January 12, 2020, 09:08:23 PM use the script. might blow it up but you live and you learn
Title: Re: 022906032E ME7.1 Need help finding maps Post by: nyet on January 13, 2020, 12:09:09 AM use the script. might blow it up but you live and you learn Tragically terrible advice. DO NOT USE THE GODDAMN SCRIPT Merged with master moron thread. Title: Re: 022906032E ME7.1 Need help finding maps Post by: ebugauge on January 18, 2020, 07:29:20 AM use the script. might blow it up but you live and you learn I used it and I got the script working but I would still like to find these maps. ESKONF for example could be very interresting for other things like sai or rear o2 sensor delete. ITNMXH and TNMXH are also pretty important for me to implement soft limiter launch control. Would be great if someone could help me. Greetings ;D Title: Re: 022906032E ME7.1 Need help finding maps Post by: RBPE on January 19, 2020, 07:43:37 AM I used it and I got the script working but I would still like to find these maps. ESKONF for example could be very interresting for other things like sai or rear o2 sensor delete. ITNMXH and TNMXH are also pretty important for me to implement soft limiter launch control. Would be great if someone could help me. Greetings ;D Not sure if the one I used here is the same revision as your file, but your ESKONF will be around that area; (https://live.staticflickr.com/65535/49408392438_2fbc342fe1_z.jpg) (https://flic.kr/p/2ih3VH9)ESKONF AUE BDE (https://flic.kr/p/2ih3VH9) by Rick B (https://www.flickr.com/photos/186175450@N06/), on Flickr Title: Re: LC/NLS Post by: ebugauge on January 20, 2020, 10:47:00 AM Thank you RBPE! ;D Can someone confirm?
ESKONF at 0x10C24 Title: Re: LC/NLS Post by: RBPE on January 24, 2020, 08:00:48 AM Thank you RBPE! ;D Can someone confirm? ESKONF at 0x10C24 Same sw rev by the look of it; (https://live.staticflickr.com/65535/49434702317_15a552396c_z.jpg) (https://flic.kr/p/2ijnLHK)aue (https://flic.kr/p/2ijnLHK) by Rick B (https://www.flickr.com/photos/186175450@N06/), on Flickr Title: Re: LC/NLS Post by: RBPE on January 24, 2020, 09:03:05 AM P.S. To save ME7.1.1 owners from having to mess around too much with trying to understand ESKONF, find "Marty" on here, look at his profile and go through the pages of posts he put up, somewhere in there you'll see he put up a break down of ESKONF on these!
Title: Re: LC/NLS Post by: _nameless on January 25, 2020, 05:54:39 AM P.S. To save ME7.1.1 owners from having to mess around too much with trying to understand ESKONF, find "Marty" on here, look at his profile and go through the pages of posts he put up, somewhere in there you'll see he put up a break down of ESKONF on these! whos marty?Title: Re: LC/NLS Post by: rysiektr on January 26, 2020, 03:14:20 PM FTOMN is 0x19E33
ITNMXH is 0x162C2 Title: Re: LC/NLS Post by: RBPE on January 27, 2020, 04:27:05 PM whos marty? Not sure, some say he's a teen who befriended a mad scientist and travels back and forth through time so that he can give his family the best life possible whilst slacking off school like his old man, some say he even runs an ME7.1.1. car powered by something called a "flux capacitor"! All we know is......he's called the Marty! ;) ;D Title: Re: LC/NLS Post by: armaan on February 01, 2020, 10:18:14 AM Hi all, hope you all are well.
Followed the instructions for 2Step LC in the attached document (Except for NLS, only for 2Step). Didn't move code (Obviously the Hex addresses Setzi originally used are different from the ones I used, but I think I applied the principle correctly, especially the part for DA (calls) & used Setzi's standard example which is: "A6 01 50 46 0A 00 F0 55 E6 FF FF FF FF FF FF FF" atleast, according to the Document. Definitely DID NOT use Eduu's 2StepScript. Checksummed one file with MTX's ME7-2002 plugin for TunerPro RT V5 & the other with ME7Sum. So far, ME7Sum has been working for all my Map files, but I'm not so certain it would work on this one since I had to toy around with Hex addresses which brings me to my question: Have I implemented 2Step correctly and which checksummed file should I test flash onto my Polo GTI 9n3? Here's the full log of ME7Sum: Code: Attempting to open firmware file 'image.bin' Step #1: Reading ROM info .. Searching for EPK signature...OK Searching for ECUID table...OK EPK : '39/1/ME7.5/3/X505R//24C/SP24C91/270705/' Part Number : '06A906032TL ' Engine ID : '1.8l R4/5VT ' SW Version : '0040' HW Number : '0261208950' SW Number : '1037378104' Step #2: Reading ROMSYS .. Startup section: word[0x008000]+word[0x00FFFE] @08038 Add=0x000106FF CalcAdd=0x000106FF ADD OK All param page: word[0x010000]+word[0x01FFFE] @01bf98 Add=0x00971D CalcAdd=0x00971D ADD OK Step #3: Reading RSA signatures .. Searching for RSA offset #0...OK Searching for RSA offset #1...OK Signature: @95b78-95bf8 Modulus: @16a22-16aa2 Exponent: @16aa2 = 3 Searching for MD5 ranges...OK MD5 Block Offset Table @169fe [32 bytes]: 1) 0x00010002-0x00013FFE 2) 0x00014252-0x00017F4E 3) 0x00018192-0x0001FBDC 4) 0x00026A00-0x0002FFFC EncrMD5: cf d7 85 02 3c 13 57 97 f2 e0 b4 72 5f 4a a4 87 CalcMD5: d7 5e a0 ec 5b 52 27 06 0d 88 2f be b0 2d 53 6b ** FIXED ** Step #4: Finding CRC table(s) .. Searching for CRC table(s)...OK CRC table(s) OK Step #5: Reading Main Data Checksums .. Searching for main data CRC pre block...missing Searching for main data CRC/csum blocks...OK Searching for main data CRC offsets...missing Searching for main data checksum offsets...OK Main Checksums: 1) 0x010002-0x013FFE CalcCSM: 001398C5 2) 0x014252-0x017F4E CalcCSM: 0026055E 3) 0x018192-0x01FBDC CalcCSM: 00441514 4) 0x026A00-0x02FFFC CalcCSM: 00BFEF41 @8ffb6 CSM: 00BFE857 CalcCSM: 00BFEF41 ** FIXED ** Step #6: ROMSYS Program Pages Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF @00803c Add=0xA19B73 CalcAdd=0xA19B73 ADD OK Step #7: Reading Main Program Checksums .. Searching for main program checksum..OK ROM Checksum Block Offset Table @1fb72 [16 bytes]: 1) 0x000000-0x00FBFF CalcChk: 48D09FE4 0x00FC00-0x01FFFF CalcChk: 20D987EB CalcCRC: CB1C2009 SKIPPED 2) 0x020000-0x0FFFFF CalcChk: 2B10DB2A @fffe0 Chk: 2B08E592 CalcChk: 2B10DB2A ** FIXED ** Step #8: Reading Multipoint Checksum Blocks .. Searching for multipoint block descriptor #1...missing Searching for multipoint block descriptor #2...OK 1) <1fbde> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK 2) <1fbee> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK 3) <1fbfe> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK .......... 64) <1ffce> 0x0F4000-0x0F7FFF Chk: 1FFFE000 CalcChk: 1FFFE000 OK 65) <1ffde> 0x0F8000-0x0FBFFF Chk: 1FFFE000 CalcChk: 1FFFE000 OK 66) <1ffee> 0x0FC000-0x0FFFFF Chk: 1FFDE002 CalcChk: 1FFDE002 OK Multipoint #2: [66 blocks x <16> = 1056 bytes] Step #9: Looking for rechecks .. <1fc6e> 0x01C000-0x01FFFF Chk: 062978B8 CalcChk: 062978B8 OK (recheck) *** Found 70 checksums in image.bin Attempting to output corrected firmware file 'out.bin' þ Opening 'out.bin' file for writing þ Writing to file þ Validating size correct 1048576=1048576 þ All OK, closing file *** DONE! 5/5 error(s) in image.bin corrected in out.bin! *** Title: Re: LC/NLS Post by: armaan on February 01, 2020, 10:20:44 AM The document I used is this one: ME7.x_LC_NLS_rev003.pdf
Doesnt seem to want to upload, but I got it off this forum. Hi all, hope you all are well. Followed the instructions for 2Step LC in the attached document (Except for NLS, only for 2Step). Didn't move code (Obviously the Hex addresses Setzi originally used are different from the ones I used, but I think I applied the principle correctly, especially the part for DA (calls) & used Setzi's standard example which is: "A6 01 50 46 0A 00 F0 55 E6 FF FF FF FF FF FF FF" atleast, according to the Document. Definitely DID NOT use Eduu's 2StepScript. Checksummed one file with MTX's ME7-2002 plugin for TunerPro RT V5 & the other with ME7Sum. So far, ME7Sum has been working for all my Map files, but I'm not so certain it would work on this one since I had to toy around with Hex addresses which brings me to my question: Have I implemented 2Step correctly and which checksummed file should I test flash onto my Polo GTI 9n3? Here's the full log of ME7Sum: Code: Attempting to open firmware file 'image.bin' Step #1: Reading ROM info .. Searching for EPK signature...OK Searching for ECUID table...OK EPK : '39/1/ME7.5/3/X505R//24C/SP24C91/270705/' Part Number : '06A906032TL ' Engine ID : '1.8l R4/5VT ' SW Version : '0040' HW Number : '0261208950' SW Number : '1037378104' Step #2: Reading ROMSYS .. Startup section: word[0x008000]+word[0x00FFFE] @08038 Add=0x000106FF CalcAdd=0x000106FF ADD OK All param page: word[0x010000]+word[0x01FFFE] @01bf98 Add=0x00971D CalcAdd=0x00971D ADD OK Step #3: Reading RSA signatures .. Searching for RSA offset #0...OK Searching for RSA offset #1...OK Signature: @95b78-95bf8 Modulus: @16a22-16aa2 Exponent: @16aa2 = 3 Searching for MD5 ranges...OK MD5 Block Offset Table @169fe [32 bytes]: 1) 0x00010002-0x00013FFE 2) 0x00014252-0x00017F4E 3) 0x00018192-0x0001FBDC 4) 0x00026A00-0x0002FFFC EncrMD5: cf d7 85 02 3c 13 57 97 f2 e0 b4 72 5f 4a a4 87 CalcMD5: d7 5e a0 ec 5b 52 27 06 0d 88 2f be b0 2d 53 6b ** FIXED ** Step #4: Finding CRC table(s) .. Searching for CRC table(s)...OK CRC table(s) OK Step #5: Reading Main Data Checksums .. Searching for main data CRC pre block...missing Searching for main data CRC/csum blocks...OK Searching for main data CRC offsets...missing Searching for main data checksum offsets...OK Main Checksums: 1) 0x010002-0x013FFE CalcCSM: 001398C5 2) 0x014252-0x017F4E CalcCSM: 0026055E 3) 0x018192-0x01FBDC CalcCSM: 00441514 4) 0x026A00-0x02FFFC CalcCSM: 00BFEF41 @8ffb6 CSM: 00BFE857 CalcCSM: 00BFEF41 ** FIXED ** Step #6: ROMSYS Program Pages Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF @00803c Add=0xA19B73 CalcAdd=0xA19B73 ADD OK Step #7: Reading Main Program Checksums .. Searching for main program checksum..OK ROM Checksum Block Offset Table @1fb72 [16 bytes]: 1) 0x000000-0x00FBFF CalcChk: 48D09FE4 0x00FC00-0x01FFFF CalcChk: 20D987EB CalcCRC: CB1C2009 SKIPPED 2) 0x020000-0x0FFFFF CalcChk: 2B10DB2A @fffe0 Chk: 2B08E592 CalcChk: 2B10DB2A ** FIXED ** Step #8: Reading Multipoint Checksum Blocks .. Searching for multipoint block descriptor #1...missing Searching for multipoint block descriptor #2...OK 1) <1fbde> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK 2) <1fbee> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK 3) <1fbfe> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK .......... 64) <1ffce> 0x0F4000-0x0F7FFF Chk: 1FFFE000 CalcChk: 1FFFE000 OK 65) <1ffde> 0x0F8000-0x0FBFFF Chk: 1FFFE000 CalcChk: 1FFFE000 OK 66) <1ffee> 0x0FC000-0x0FFFFF Chk: 1FFDE002 CalcChk: 1FFDE002 OK Multipoint #2: [66 blocks x <16> = 1056 bytes] Step #9: Looking for rechecks .. <1fc6e> 0x01C000-0x01FFFF Chk: 062978B8 CalcChk: 062978B8 OK (recheck) *** Found 70 checksums in image.bin Attempting to output corrected firmware file 'out.bin' þ Opening 'out.bin' file for writing þ Writing to file þ Validating size correct 1048576=1048576 þ All OK, closing file *** DONE! 5/5 error(s) in image.bin corrected in out.bin! *** Title: Re: LC/NLS Post by: armaan on February 02, 2020, 03:12:49 PM Bumpety Bump
Title: Re: LC/NLS Post by: rysiektr on February 05, 2020, 12:53:37 AM In my opinion, it's not working.
According to the instructions of LC and NLS yo need to add your conditions value like SpeedThreshold, LaunchRPM etc in around the of HEX address 17E00, not on free space in the end of file. In your file I will use free space in location 17E40. Title: Re: LC/NLS Post by: armaan on February 07, 2020, 09:47:28 AM In my opinion, it's not working. According to the instructions of LC and NLS yo need to add your conditions value like SpeedThreshold, LaunchRPM etc in around the of HEX address 17E00, not on free space in the end of file. In your file I will use free space in location 17E40. Thanks bud, lemme have a look at it again, and will post it up on the forum again. Title: something wrong with 032mj file Post by: trt2020 on April 02, 2020, 02:44:01 PM hello all !
first i introduce me like "i am noob" and i want to learn .. i have problems with a seat leon . i read the file from ecu .. is not a stock file from what i know.. and tried to implement via lc/nls via script .. all good writed the file to the ecu .. car runs good .. no problems.. after that .. i writed same file to another ecu with same hw .. and the car doesnt start .. and gives me p1640 eeprom error both car had immo off when i load the file with winols it gave me an unseen error by me from this time .. first pic is with error after clicking ok .. it looks normal for me.. can anyone help me with this problem ? the file is attached below.. thanks in advance ! Title: Re: something wrong with 032mj file Post by: sonique on April 02, 2020, 03:46:56 PM buy original winols and checksum plugin
Title: Re: something wrong with 032mj file Post by: sonique on April 02, 2020, 03:50:59 PM checksum bad
Title: Re: something wrong with 032mj file Post by: nyet on April 02, 2020, 05:06:06 PM ditch the LS garbage unless you are willing to do it yourself, by hand.
How many fucking times do i have to say it Title: Re: something wrong with 032mj file Post by: trt2020 on April 03, 2020, 01:17:33 AM checksum bad can you correct it for me?Title: Re: something wrong with 032mj file Post by: trt2020 on April 03, 2020, 01:36:06 AM ditch the LS garbage unless you are willing to do it yourself, by hand. nyet.. i just writed above... I am begginer.. and all i want to do is learning mate.. How many fucking times do i have to say it Title: Re: something wrong with 032mj file Post by: IamwhoIam on April 03, 2020, 02:30:45 AM You're a noob but you're learning on other people's cars and probably charging them money for this "service" too I guess... don't come tell me you're doing all this as charitable work!
Title: Re: something wrong with 032mj file Post by: trt2020 on April 03, 2020, 03:32:23 AM i am learning on my car ... this sw i want to use on my car .. not on others ... and for what i am doing on the sw side i never get money because .. i tell them .. i dont know better what i am doing ...i am just learning really
Title: Re: something wrong with 032mj file Post by: nyet on April 03, 2020, 04:44:54 PM i am learning on my car ... this sw i want to use on my car .. not on others ... and for what i am doing on the sw side i never get money because .. i tell them .. i dont know better what i am doing ...i am just learning really Moved/merged to the appropriate thread. Read it from the start. Title: S6 C5 4.2 ANK Launch control, no lift shift Post by: Marcin987654321 on April 05, 2020, 11:32:02 AM hey, can someone add to my .bin LC and NLS? I've tried, but i don't know how.
Title: Re: S6 C5 4.2 ANK Launch control, no lift shift Post by: fknbrkn on April 05, 2020, 01:46:01 PM I've tried, but i don't know how. What exactly youve tried to do?Title: Re: S6 C5 4.2 ANK Launch control, no lift shift Post by: Marcin987654321 on April 05, 2020, 02:30:41 PM https://www.scribd.com/document/259767187/ME7-x-LC-NLS-rev003-pdf
Title: Re: S6 C5 4.2 ANK Launch control, no lift shift Post by: fknbrkn on April 05, 2020, 03:27:24 PM there is me7 tuning wizard excel sheet floating somewhere
try that Title: Re: S6 C5 4.2 ANK Launch control, no lift shift Post by: Marcin987654321 on April 05, 2020, 11:12:07 PM ok. i found. but i don't know what write to the marked fields. And after that... where i must paste this script?
Title: Re: S6 C5 4.2 ANK Launch control, no lift shift Post by: nyet on April 06, 2020, 01:44:57 PM ok. i found. but i don't know what write to the marked fields. And after that... where i must paste this script? Merged with master moron thread. Please read the whole thing from the beginning. In particular, read the text in red. Title: Golf 2.5i ME7.1.1 LC/ALS definition Post by: LuckkyLuke on April 07, 2020, 01:28:32 PM Hi, can anyone help me definition this file for LC and ALS implications?
Thank you very much Title: Re: Golf 2.5i ME7.1.1 LC/ALS definition Post by: nyet on April 07, 2020, 01:57:42 PM If you can't do this yourself there is NO way you're going to implement LC/ALS
Title: Re: S6 C5 4.2 ANK Launch control, no lift shift Post by: Roader55 on April 07, 2020, 02:30:12 PM ok. i found. but i don't know what write to the marked fields. And after that... where i must paste this script? Market fields are the adress of the maps inside the bin file,u have to find them now in software and make map packTitle: Re: S6 C5 4.2 ANK Launch control, no lift shift Post by: nyet on April 07, 2020, 02:31:12 PM Market fields are the adress of the maps inside the bin file,u have to find them now in software and make map pack A map pack alone is not enough to implement LC/NLS Title: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: Dabus94 on April 28, 2020, 01:13:55 AM Hi guys !
Can somebody help me with this thinks which i posted in Subject? Im starting to do modifications in vag benzin ecus, but its hard already :D Can somebody give me some advices, and if its possible can make this things in ecu file i attached to this post? I will be really gratrful... Best Greetings for u ! Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: adam- on April 28, 2020, 03:17:57 AM I used the information in the stickies to do this, see attached file.
Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: _nameless on April 28, 2020, 04:30:32 AM Hi guys ! Can somebody help me with this thinks which i posted in Subject? Im starting to do modifications in vag benzin ecus, but its hard already :D Can somebody give me some advices, and if its possible can make this things in ecu file i attached to this post? I will be really gratrful... Best Greetings for u ! Here mate added overrun bang pops to Adams file spikes 1.4 bar and hold 1.2 bar t redline. Supra fast Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: Dabus94 on April 28, 2020, 05:56:00 AM Unfortunly i cant see any your attachments... Why ?
Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: adam- on April 28, 2020, 06:01:16 AM If you haven't read all of the stickies you can't see attached files. Check out the 'how to add LC/NLS one' specifically.
Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: _nameless on April 28, 2020, 06:10:05 AM Unfortunly i cant see any your attachments... Why ? abd you need a minimum of 200 posts Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: Dabus94 on April 28, 2020, 06:20:23 AM Im sorry if im pushy a little, im not sure where the sticky are. Can u drop some link please? I will be so grateful :)
Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: IamwhoIam on April 28, 2020, 06:45:56 AM Here is your NLF mod
Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: Dabus94 on April 28, 2020, 07:08:17 AM Can u send me it on email or somethink ? :D I cant see attachments, because im nooby user yet :D
Title: Re: LC, NLF, AL ME7.5 AJQ 1.8 T 180 km Audi TT HELP PLEASE :D Post by: nyet on April 28, 2020, 10:17:46 AM Can u send me it on email or somethink ? :D I cant see attachments, because im nooby user yet :D Merged with the master moron thread. Enjoy. Title: ALS LC for Simos18 Post by: rego88 on May 03, 2020, 08:09:56 AM Hello anyone have the solution for Launch Control In rolling mode for Golf 7 GTI DSG Simos18? i atached the original file
Title: Re: LC/NLS Post by: nyet on May 03, 2020, 03:26:29 PM Moved to master moron thread
Title: me7 cks error when implementing antilag Post by: ashleymark on May 10, 2020, 09:35:44 AM hi i was wondering if someone could help me with a me7 issue.
i recently purchased a car that was previously tuned. i liked the tune but wanted to add antilag and nls, so i sent file to someone to have this added. when i write file to car i get a no start condition, but 1st file fixes this. i have contacted tuner but no reply. i was wondering if someone could check files to see if they could find issues. no matter what i try i cant get ecu to accept antilag file. when i load tuned file without antilag into winols i get a cks error, but car starts with this file. when i load antilag file winols says no errors. me7check says both files have one cks error. many thanks Title: Re: me7 cks error when implementing antilag Post by: nyet on May 10, 2020, 12:00:07 PM 1) why didn't you use me7sum
2) I'm going to merge this with the master nls/lc clusterfuck thread. Please read the whole thing. Title: Re: LC/NLS Post by: fknbrkn on May 10, 2020, 12:04:59 PM Its a heavily modified flash
blast from the past revo or apr tune from late 00s Title: Re: me7 cks error when implementing antilag Post by: bamofo on May 11, 2020, 10:39:53 AM hi i was wondering if someone could help me with a me7 issue. i recently purchased a car that was previously tuned. i liked the tune but wanted to add antilag and nls, so i sent file to someone to have this added. when i write file to car i get a no start condition, but 1st file fixes this. i have contacted tuner but no reply. i was wondering if someone could check files to see if they could find issues. no matter what i try i cant get ecu to accept antilag file. when i load tuned file without antilag into winols i get a cks error, but car starts with this file. when i load antilag file winols says no errors. me7check says both files have one cks error. many thanks It doesnt look coded right according to IDA pro. Title: NLS/LC script problem ME7Info - 06A906032KP Post by: chacarita on May 12, 2020, 05:43:37 PM Sorry to bother with a subject that has been long discussed. After executing maZer.gti's launch.exe script which specifies: "Ok now is fixed, tested on 06A906032KP, 06A906032HN, 8D0907551M" The file was created successfully and I even compared it with the original bin on WinHex to check that the changes were done in the proper addresses following the PDF : ME7.x LC-NLS_Rev003. After loading the file onto the car, it wouldn't start although having injection time, throttle was working everything without DTC, only problem was i wasn't getting spark. I understand this was caused by having FTOMN set to 00, as I changed it to 01 (original value being 05) and the car started no problem but the LC was not there. Can anyone guide me in the proper direction? I am having trouble identifying what the problem is or what i am missing. Forgot to mention but i think checksum was calculated properly because i can see in the checksum correction area that changes have been made.
I attach below the files. Thanks in advance for any possible help. Title: Re: LC/NLS Post by: nyet on May 12, 2020, 10:31:29 PM If you read all of the discussions you'd know not to do anything with this script unless you know ASM.
Title: Re: NLS/LC script problem ME7Info - 06A906032KP Post by: bamofo on May 13, 2020, 06:18:50 AM Sorry to bother with a subject that has been long discussed. After executing maZer.gti's launch.exe script which specifies: "Ok now is fixed, tested on 06A906032KP, 06A906032HN, 8D0907551M" The file was created successfully and I even compared it with the original bin on WinHex to check that the changes were done in the proper addresses following the PDF : ME7.x LC-NLS_Rev003. After loading the file onto the car, it wouldn't start although having injection time, throttle was working everything without DTC, only problem was i wasn't getting spark. I understand this was caused by having FTOMN set to 00, as I changed it to 01 (original value being 05) and the car started no problem but the LC was not there. Can anyone guide me in the proper direction? I am having trouble identifying what the problem is or what i am missing. Forgot to mention but i think checksum was calculated properly because i can see in the checksum correction area that changes have been made. I attach below the files. Thanks in advance for any possible help. Both of your modded files have errors with checksums which is why it probably doesnt start. FTOMN 00 vs 01 is just the minimum not what it runs all the time, so you shouldn't have problems with it. The hook looks right @ 38099D - Code is at A5850 which is what your hook is sending it to. Can you share your ECU file you used to put in the reference links with his tool?? Title: Re: LC/NLS Post by: chacarita on May 13, 2020, 06:40:35 PM I used the following .ecu file which was generated by the me7info. The files i uploaded were wrong because checksum was later on corrected. I upload actual file that was loaded into car post chk correction. Thanks for helping a noob out, I really want to understand what I am doing and I tried writing the code manually according to the rev003 instructive but if the ecu definitions are wrong it does not make any sense. At one point i suspected the ecu file being wrongly addressed and can't find any for 32KP ecu.
Title: Re: LC/NLS Post by: bamofo on May 14, 2020, 09:22:29 AM I used the following .ecu file which was generated by the me7info. The files i uploaded were wrong because checksum was later on corrected. I upload actual file that was loaded into car post chk correction. Thanks for helping a noob out, I really want to understand what I am doing and I tried writing the code manually according to the rev003 instructive but if the ecu definitions are wrong it does not make any sense. At one point i suspected the ecu file being wrongly addressed and can't find any for 32KP ecu. It looks like its hooked right, and the references to RAM look good enough to get Launch control to at least work. Please try this rev instead though. Also you want to use ME7logger to check all your ram locations are correct. Just go back into the tool you used and find all the variables you need to track. Thing i see sometimes is the clutch pedal sensor is broken and it wont jump logic correctly. I am no pro at this at all, but you seem close to getting it right. Title: Re: LC/NLS Post by: chacarita on May 15, 2020, 03:51:57 PM Thank you for the file! I am going to try it tomorrow, I also have a revisited version to try with the details you made me focus on. I'll keep you posted my friend.
Title: Re: LC/NLS Post by: chacarita on May 20, 2020, 06:32:27 PM Sorry for the delayed reply, shop was very busy.Thanks for helping me with the project and my learning journey, I think i am beginning to understand. Your file worked perfectly and so did a file I got to work. I'll attach below. I compared it in HEXA with yours and see there are differences but it worked.
Title: Re: LC/NLS Post by: ebugauge on June 17, 2020, 02:56:58 AM Hi, I tried to implement LC/NLS on my car, but it stalls when i press the clutch. Tested it with FTOMN 00 and 01
I attached the original file and the checksummed modified. I tried to checksum it with WinOLS, MPPS and ME7Sum, but it is always the same problem. Could someone help me please? I don't know what am I doing wrong ??? Greetings EDIT: Car is a Audi A3 1.8T ARZ Title: Re: LC/NLS Post by: nyet on June 17, 2020, 08:50:36 AM Hi, I tried to implement LC/NLS on my car, but it stalls when i press the clutch. Tested it with FTOMN 00 and 01 Did you write the ASM yourself? If so, post the ASM patches and comments on what each change does. If you didn't write the ASM yourself you're not going to get anywhere. Title: dead ECU after tune Post by: JavaCrash on July 07, 2020, 12:24:44 PM Hello all,
What I did for the tune is I took the antilag/2step bin from here: http://nefariousmotorsports.com/forum/index.php?topic=607.msg5026#msg5026 Then I proceded to follow this guide for stage 2 on that bin that I downloaded from the above link. http://www.myaudis4.com/stage-2/ I flashed it yesterday to my car, waited for flash to complete, and once complete turned off the ignition, and when I clicked the key over, no cel. It damn near killed my ecu. I was only able to recover it once I got it into boot mode and flashed it. No problems since on stock. However I didn't attempt to reflash the tune, because I didn't know if it was something I did, or if it was bad luck. I verified the checksum, corrected the errors, however the ecu took a dump with my file. I attached my completed file before flashing, named STG2_AL_CORRECTED.BIN and also attached the file I pulled off the ecu with galleto while the ecu was in boot mode, if its any help. That file will be named BPULL.bin I think/hope I just got unlucky, or did something wrong. Any advice is greatly appreciated. Title: Help for launch control for S4 B5 with 8d0907551C ecu Post by: JelloMan on July 18, 2020, 01:00:18 PM Hey,
How is it so that on 8d0907551D the launch control and "flat shift" works but not on 8d0907551C? What is the difference between these two ecu's that the same program wont run with C model and can i get it running with my 8d0907551C ecu? Car is S4 B5 1998 (EU) model. Title: Re: LC/NLS Post by: nyet on July 18, 2020, 01:22:00 PM merged with master tard thread
Title: Re: Help for launch control for S4 B5 with 8d0907551C ecu Post by: bamofo on July 20, 2020, 12:08:45 PM Hey, How is it so that on 8d0907551D the launch control and "flat shift" works but not on 8d0907551C? What is the difference between these two ecu's that the same program wont run with C model and can i get it running with my 8d0907551C ecu? Car is S4 B5 1998 (EU) model. Ram locations must be different. you would have to publish both files for us to confirm though. Title: Re: Help for launch control for S4 B5 with 8d0907551C ecu Post by: nyet on July 20, 2020, 05:31:38 PM Ram locations must be different. you would have to publish both files for us to confirm though. None of this matters, since the script is *known* not to work on many, many, uncountable images. Title: Re: Help for launch control for S4 B5 with 8d0907551C ecu Post by: bamofo on July 23, 2020, 10:08:50 AM None of this matters, since the script is *known* not to work on many, many, uncountable images. Which is why i asked them to post it up so i could see. Its not much work to look into it with him. honestly i just want to see one person that asks for help actually come back and say oh thanks! yeah here it is... and it hasnt happend yet. its 1-8 posts then they leave. Title: Re: Help for launch control for S4 B5 with 8d0907551C ecu Post by: nyet on July 23, 2020, 10:29:20 AM Which is why i asked them to post it up so i could see. Its not much work to look into it with him. honestly i just want to see one person that asks for help actually come back and say oh thanks! yeah here it is... and it hasnt happend yet. its 1-8 posts then they leave. Exactly. This is because the demographic that wants NLS/LS generally doesn't belong here in the first place. Hence this master thread. Title: Re: LC/NLS Post by: rumianko on July 30, 2020, 01:39:59 AM Hello. I have a question about LC. I do everything as described, it shows that everything is ok, but LC doesn't work. can someone help?
Title: Re: LC/NLS Post by: nyet on July 30, 2020, 08:37:09 AM Hello. I have a question about LC. I do everything as described, it shows that everything is ok, but LC doesn't work. can someone help? Did you write the ASM yourself? If not, start from page one here and read the first few posts again. Also, please dont post camera photos of your screen. Screen shot if it is graphics, copy/paste if text. Title: Re: LC/NLS Post by: bamofo on July 31, 2020, 08:53:37 AM Hello. I have a question about LC. I do everything as described, it shows that everything is ok, but LC doesn't work. can someone help? The problem is its not referencing the #38h for most of your calls so its failing when it checks for coolant temp. I can try to update it if you answer the thread and dont leave after one post. But i could be wrong since its using movbz... thsts just not how i implemented it. First change would be to test FOTMN to 1 instead of 0. Title: Re: dead ECU after tune Post by: nyet on August 12, 2020, 09:42:21 AM Hello all, What I did for the tune is I took the antilag/2step bin from here: http://nefariousmotorsports.com/forum/index.php?topic=607.msg5026#msg5026 Then I proceded to follow this guide for stage 2 on that bin that I downloaded from the above link. http://www.myaudis4.com/stage-2/ I flashed it yesterday to my car, waited for flash to complete, and once complete turned off the ignition, and when I clicked the key over, no cel. It damn near killed my ecu. I was only able to recover it once I got it into boot mode and flashed it. No problems since on stock. However I didn't attempt to reflash the tune, because I didn't know if it was something I did, or if it was bad luck. I verified the checksum, corrected the errors, however the ecu took a dump with my file. I attached my completed file before flashing, named STG2_AL_CORRECTED.BIN and also attached the file I pulled off the ecu with galleto while the ecu was in boot mode, if its any help. That file will be named BPULL.bin I think/hope I just got unlucky, or did something wrong. Any advice is greatly appreciated. Bootmode back to stock, delete any NLS/LC bin you have on your hard drive, done. Title: Re: LC/NLS Post by: nyet on August 12, 2020, 09:43:13 AM The problem is its not referencing the #38h for most of your calls so its failing when it checks for coolant temp. I can try to update it if you answer the thread and dont leave after one post. But i could be wrong since its using movbz... thsts just not how i implemented it. First change would be to test FOTMN to 1 instead of 0. Split to http://nefariousmotorsports.com/forum/index.php?topic=18291.0title= since this is actually useful. Thank you again, bamofo. Title: Re: dead ECU after tune Post by: JavaCrash on August 16, 2020, 01:34:00 PM Bootmode back to stock, delete any NLS/LC bin you have on your hard drive, done. I did that. I don't know why my ecu didn't like that file, but I bootmoded back to stock, then tried again and I had to bootmode back to stock again. Recreated the file, and it was fine. If anyone is feeling lazy, or can't seem to get it to work, I have mine attached. My tune is Stage 2 k03 (18psi peak) following this guide: http://www.myaudis4.com/stage-2/ My tune has the EGTs coded out, since mine took a shit. It's an M box tune with hitachi maf. Title: Re: dead ECU after tune Post by: bamofo on August 17, 2020, 09:26:24 AM I did that. I don't know why my ecu didn't like that file, but I bootmoded back to stock, then tried again and I had to bootmode back to stock again. Recreated the file, and it was fine. If anyone is feeling lazy, or can't seem to get it to work, I have mine attached. My tune is Stage 2 k03 (18psi peak) following this guide: http://www.myaudis4.com/stage-2/ My tune has the EGTs coded out, since mine took a shit. It's an M box tune with hitachi maf. Its not coded right thats why its not working. Your referencing FD48.9. Go back to the script or the tool you used and re-evaluate what you put in there. Title: launch control doesnt work ! need help ! Post by: trt2020 on November 06, 2020, 08:59:16 AM hi friends ! i tried to add launch control to a 8N0906018J file with script file . and it doesnt work ! tried and rewrited the file with lc . no luck . can anyone point me in a good direction to solve that ?.. i will attach ori and mod file .
Title: Re: LC/NLS Post by: nyet on November 06, 2020, 12:24:39 PM Merged with master moron thread
Title: Re: launch control doesnt work ! need help ! Post by: bamofo on November 09, 2020, 09:22:24 AM hi friends ! i tried to add launch control to a 8N0906018J file with script file . and it doesnt work ! tried and rewrited the file with lc . no luck . can anyone point me in a good direction to solve that ?.. i will attach ori and mod file . Its hard to tell what's wrong without logs. Try this. if LC works but NLS doesn't then you probably have a bad clutch switch. On your original rom log the following and tell us what you see if you want to figure it out. TMOTLIN Clutch pedal Brake Pedal Title: Re: LC/NLS Post by: r29vag on November 23, 2020, 12:33:23 PM Hi all,
My first time posting. I followed sn00k's guide but I cant get the AL and NLS to work, car starts and drives. Bellow are my notes and I have attached the modified bin and xdf. thank you Aleks tsrldyn 0x380BB7 B7 8B B_kuppl 0x00FD4E.14 27 13 vfil_w 0x381C0C 9c 0c nmot_w 0x00F89E 9E F8 wped 0x3809B1 89 B1 B_brems 0x00FD4E.12 27 C0 FTOMN 0x1A43D Unused ram 0x384B90 0x384036 B7 8B F3 F8 9D 89 D7 40 06 02 03 F8 26 24 9D 02 ORIGINAL LINE LINK IN. 9A 27 13 E0 F2 F4 0C 9C D7 00 81 00 F2 F9 00 7E DONE 40 49 9D 0B F2 F4 9E F8 D7 00 81 00 F2 F9 02 7E DONE 40 49 FD 03 F7 8E B7 8B 0D 2F 9A 27 29 E0 8A 27 DONE 22 C0 F2 F4 9E F8 D7 00 81 00 F2 F9 06 7E 40 49 DONE FD 1A C2 F4 89 B1 D7 00 81 00 C2 F9 08 7E 40 49 DONE FD 12 D7 00 38 00 F2 F4 90 4B D7 00 81 00 F2 F9 DONE 04 7E 40 49 9D 11 F7 8E B7 8B 08 41 D7 00 38 00 DONE F7 F8 90 4B 0D 09 D7 00 38 00 F6 8F 90 4B 0D 04 DONE D7 00 38 00 F6 8E 90 4B F3 9D 89 8A DB 00 FF FF DONE Title: Re: LC/NLS Post by: nyet on November 23, 2020, 01:46:06 PM kind of hard to follow w/o posting ASM
Title: Re: LC/NLS Post by: bamofo on November 24, 2020, 05:49:12 PM Hi all, My first time posting. I followed sn00k's guide but I cant get the AL and NLS to work, car starts and drives. Bellow are my notes and I have attached the modified bin and xdf. thank you Aleks tsrldyn 0x380BB7 B7 8B B_kuppl 0x00FD4E.14 27 13 vfil_w 0x381C0C 9c 0c nmot_w 0x00F89E 9E F8 wped 0x3809B1 89 B1 B_brems 0x00FD4E.12 27 C0 FTOMN 0x1A43D Unused ram 0x384B90 0x384036 B7 8B F3 F8 9D 89 D7 40 06 02 03 F8 26 24 9D 02 ORIGINAL LINE LINK IN. 9A 27 13 E0 F2 F4 0C 9C D7 00 81 00 F2 F9 00 7E DONE 40 49 9D 0B F2 F4 9E F8 D7 00 81 00 F2 F9 02 7E DONE 40 49 FD 03 F7 8E B7 8B 0D 2F 9A 27 29 E0 8A 27 DONE 22 C0 F2 F4 9E F8 D7 00 81 00 F2 F9 06 7E 40 49 DONE FD 1A C2 F4 89 B1 D7 00 81 00 C2 F9 08 7E 40 49 DONE FD 12 D7 00 38 00 F2 F4 90 4B D7 00 81 00 F2 F9 DONE 04 7E 40 49 9D 11 F7 8E B7 8B 08 41 D7 00 38 00 DONE F7 F8 90 4B 0D 09 D7 00 38 00 F6 8F 90 4B 0D 04 DONE D7 00 38 00 F6 8E 90 4B F3 9D 89 8A DB 00 FF FF DONE You had a bunch of things wrong in here. I sent you the file and asked to publish it fixed here if it is indeed fixed. Things i noticed 1) Battery hook wasnt sending to the right hex 2) Nmot was the wrong one. you want the one that has a multiplier of 40, not .25 3) exit was wrong of the whole routine, you need the original hex that you hooked in there. 4) brake hook was wrong 5).... there were more. thats why i just fixed it and sent it off for testing. Title: Re: LC/NLS Post by: r29vag on November 25, 2020, 11:49:50 AM You had a bunch of things wrong in here. I sent you the file and asked to publish it fixed here if it is indeed fixed. Things i noticed 1) Battery hook wasnt sending to the right hex 2) Nmot was the wrong one. you want the one that has a multiplier of 40, not .25 3) exit was wrong of the whole routine, you need the original hex that you hooked in there. 4) brake hook was wrong 5).... there were more. thats why i just fixed it and sent it off for testing. Thank you for the help, unfortunately even after the fix it was not working. As you said the RAM memory I picked is used by something else, so i will have to do some logs and find unused RAM for the NLScounter. Since that I have scrapped everything and started from scratch again as i was getting confused, will replace the NMOT_W (x.25) with NMOT (40) per your suggestion as well. I will keep posting updates. Title: Re: LC/NLS Post by: Jannik07 on December 02, 2020, 06:05:11 AM Hello friends !
I successfully implemented the LC/NLS code a few times now. It works quite good. But now a friend of mine wants a real flamethrower! I know that makes no sense but thats what he wants :D Until now it only works for the hardcut Limiter. Is there a way to modify the LC code for a later ignition angle? I tried to find out by myself, but got no results. thanks in advance ! Title: Re: LC/NLS Post by: _nameless on December 02, 2020, 06:49:44 AM Hello friends ! I can do this if needed PM me I successfully implemented the LC/NLS code a few times now. It works quite good. But now a friend of mine wants a real flamethrower! I know that makes no sense but thats what he wants :D Until now it only works for the hardcut Limiter. Is there a way to modify the LC code for a later ignition angle? I tried to find out by myself, but got no results. thanks in advance ! Title: Re: LC/NLS Post by: bamofo on December 02, 2020, 12:16:30 PM Hello friends ! I successfully implemented the LC/NLS code a few times now. It works quite good. But now a friend of mine wants a real flamethrower! I know that makes no sense but thats what he wants :D Until now it only works for the hardcut Limiter. Is there a way to modify the LC code for a later ignition angle? I tried to find out by myself, but got no results. thanks in advance ! If you have the code already done sure thats a quick change let us know. Marty can help or myself. Title: Re: LC/NLS Post by: Jannik07 on December 06, 2020, 01:20:36 AM Hey,
unfortunately Marty did not reply to my PM. Maybe you can give me a hint or something? My file is attached. thanks ! Title: Re: LC/NLS Post by: bamofo on December 09, 2020, 01:14:30 PM Yup i can do this now. Ill send it over shortly.
Title: Re: LC/NLS Post by: manializania on December 13, 2020, 12:43:14 PM Hello all. Do you have any idea how to remove LC/NLS? I have to remove because I have a problem with the ignition. after a while the ignition goes back and the car becomes weaker.
Title: Re: LC/NLS Post by: eliotroyano on December 13, 2020, 03:23:53 PM Hello all. Do you have any idea how to remove LC/NLS? I have to remove because I have a problem with the ignition. after a while the ignition goes back and the car becomes weaker. You can leave FTOMN with original value or LC RPM threshold bigger than OEM RPM limiter, for example. That should disable LC function. Title: Re: LC/NLS Post by: nyet on December 13, 2020, 04:19:57 PM You should have made a backup before running the script on your bin.
Or better yet, you should have never run the script on your bin in the first place. Title: Re: LC/NLS Post by: bamofo on December 13, 2020, 04:21:39 PM You should have made a backup before running the script on your bin. Or better yet, you should have never run the script on your bin in the first place. That was very helpful. Thanks John madden. Title: Re: LC/NLS Post by: bamofo on December 14, 2020, 08:01:19 AM Hello all. Do you have any idea how to remove LC/NLS? I have to remove because I have a problem with the ignition. after a while the ignition goes back and the car becomes weaker. Is it tuned? If you PM me the file or share it here ill remove the LC/NLS for you no problem. Title: Re: LC/NLS Post by: _nameless on December 14, 2020, 08:13:37 AM You can leave FTOMN with original value or LC RPM threshold bigger than OEM RPM limiter, for example. That should disable LC function. just set your launch and nls variables to higher then your rev lim Title: Re: LC/NLS Post by: bamofo on December 14, 2020, 10:44:31 AM He sent me the file. Just had to fix FTOMN / Undo the UB hook and delete all the code. He can redo the Limiters however he wants now.
Title: How to Install PHP for ME7 LC Script Post by: Ak47 on January 31, 2021, 12:52:07 AM Hi Guys
Im looking for someone that can help me install PHP for ME7 LC script. I get the following error: Me7info.exe could not open ecu.bin Kind regards Title: Re: LC/NLS Post by: nyet on January 31, 2021, 04:42:36 PM Moved to master 'tard thread.
Please read the first few posts carefully. Title: TT 8n 8n0906018s LC problem Post by: ImKritical on February 25, 2021, 09:04:15 AM I successfully did a stage 1 on my car, some more boost and some fuel, pops and bangs, and than i wanted to add LC and flatshift (i attached my xdf and bin) and after flashing new map, car won't start, when i push the clutch pedal to start the car, EPC flashes and check engine light and i can hear throttle body move and when i turn the key to start it just wont crank, than i let the clutch pedal out and EPC and check engine stops flashing. I can't figure out what im doing wrong, i did the same thing to my friends car and it works grate.
I flashed my car back to stage 1 tune and it starts fine, so i must be doing something wrong. I have the usa version where i have to push the clutch to start maybe thats the reason? Title: Re: LC/NLS Post by: nyet on February 26, 2021, 04:28:29 PM merged to master moron thread
http://nefariousmotorsports.com/forum/index.php?topic=9014.0 Title: audi tt LC NLS HELP Post by: selveti on March 17, 2021, 02:33:42 PM can anyone help me how to implement the LC NLS on me7.5 512mb
i can use the script in 1024mb but in 512 its not working can anyone explain me more simple thanks Title: Re: audi tt LC NLS HELP Post by: nyet on March 17, 2021, 04:23:43 PM can anyone help me how to implement the LC NLS on me7.5 512mb i can use the script in 1024mb but in 512 its not working can anyone explain me more simple thanks let me guess this straight: you aren't even aware that you are the OP of the master moron thread? Merged. This is hilarious Title: Re: audi tt LC NLS HELP Post by: bamofo on March 18, 2021, 11:17:35 AM can anyone help me how to implement the LC NLS on me7.5 512mb i can use the script in 1024mb but in 512 its not working can anyone explain me more simple thanks He is right i didnt notice that lol. If you PM me i can help and then share the file when its done. Title: Re: LC/NLS Post by: selveti on March 19, 2021, 10:36:24 AM i am trying to put code manually but i dont know what code i need to replace with any help the script cannot find space in my file
Title: Re: LC/NLS Post by: nyet on March 19, 2021, 10:37:35 AM i am trying to put code manually but i dont know what code i need to replace with any help did you read the first 5 posts in this thread? Title: Re: LC/NLS Post by: ImKritical on March 22, 2021, 05:32:34 AM Anyone wanna guide me in the right direction ? I coded lc manually without the script, changed location multiple times, i had D7 40 06 02 03 F8 in 6 places so i tried all 6 and flashed my car each time, and none of the new calls worked, car didn't start every time. Could the code be wrong? even a small tip would be very helpful
Title: Re: LC/NLS Post by: nyet on March 22, 2021, 04:22:14 PM Anyone wanna guide me in the right direction ? I coded lc manually without the script, changed location multiple times, i had D7 40 06 02 03 F8 in 6 places so i tried all 6 and flashed my car each time, and none of the new calls worked, car didn't start every time. Could the code be wrong? even a small tip would be very helpful Did you read the first 5 posts in this thread? Title: Re: LC/NLS Post by: bamofo on March 23, 2021, 07:09:19 AM Anyone wanna guide me in the right direction ? I coded lc manually without the script, changed location multiple times, i had D7 40 06 02 03 F8 in 6 places so i tried all 6 and flashed my car each time, and none of the new calls worked, car didn't start every time. Could the code be wrong? even a small tip would be very helpful PM me your rom and i can take a look or share it here. what your looking for is the match that has TSRDLYN loading right before it. Title: Re: LC/NLS Post by: stuydub on March 23, 2021, 07:43:56 AM PM me your rom and i can take a look or share it here. what your looking for is the match that has TSRDLYN loading right before it. Already done it Title: Re: LC/NLS Post by: ImKritical on March 28, 2021, 02:43:46 AM Thanks for the help, your file still did not work but at least my car started since the call was in the right place, and after changeing ftmon to the right one LC and nls works perfect.
Title: help als me 7.5 audi tt 225 Post by: scican25 on May 11, 2021, 03:22:03 AM hi I can not activate als on ecu me 7.5 audi tt 225
can someone kindly help me ? Title: Re: help als me 7.5 audi tt 225 Post by: _nameless on May 11, 2021, 05:21:19 AM @nye, we got another one for the master moron thread
Title: Re: help als me 7.5 audi tt 225 Post by: stuydub on May 11, 2021, 11:31:48 AM I WONDER WHY
Title: Re: help als me 7.5 audi tt 225 Post by: scican25 on May 11, 2021, 01:15:50 PM Title: Re: help als me 7.5 audi tt 225 Post by: scican25 on May 11, 2021, 01:20:43 PM @nye, we got another one for the master moron thread ??????? Title: Re: help als me 7.5 audi tt 225 Post by: stuydub on May 11, 2021, 01:36:23 PM Sorry, but I did not understand U dont understand what CHECKSUMS are ???? Title: Re: help als me 7.5 audi tt 225 Post by: stuydub on May 11, 2021, 01:38:56 PM Sorry, but I did not understand should look like this if u fix it Title: Re: help als me 7.5 audi tt 225 Post by: scican25 on May 11, 2021, 02:34:11 PM U dont understand what CHECKSUMS are ???? Yes I am what I am Title: Re: help als me 7.5 audi tt 225 Post by: scican25 on May 11, 2021, 02:36:04 PM Study hub But I don't understand how to activate antilag
Title: Re: help als me 7.5 audi tt 225 Post by: nyet on May 11, 2021, 09:25:03 PM hi I can not activate als on ecu me 7.5 audi tt 225 can someone kindly help me ? Please read this thread from the beginning Title: Alc not work Post by: toni080103 on July 12, 2021, 09:19:17 AM Hi i got me7.5 seat leon 1m with antilag launch control boost meter show it gets boost when i press clutch and gas and exhaust pops but it dont limit revs as it should to 4k it just goes all the way up
Title: Alc not work Post by: toni080103 on July 14, 2021, 09:33:07 AM Help me please, my antilag launch control does not work, it builds boost and pops but it wont limit rpm to 4k what it should it just goes all the way up
Title: Re: Alc not work Post by: toni080103 on July 14, 2021, 09:39:04 AM Wrong file , this is right this have checksums corrected
Title: Alc not work Post by: toni080103 on July 14, 2021, 10:13:44 AM Help me please, my antilag launch control does not work, it builds boost and pops but it wont limit rpm to 4k what it should it just goes all the way up
Title: Re: LC/NLS Post by: nyet on July 14, 2021, 02:08:27 PM Merged with master moron thread.
Keep it up. No really, keep wasting my time.. Title: LC/NLS for 2002 s4 b5 aa-box tip ? Post by: maxXAM on October 08, 2021, 12:46:52 AM hi guys
i just want to add anti lag to my 2002 s4 aa-box tip how to make it work with tip using brake paddle ? by using 2step & Antilag Auto Add Script Title: Re: LC/NLS for 2002 s4 b5 aa-box tip ? Post by: IamwhoIam on October 08, 2021, 07:16:24 AM If you want to destroy the trans in one launch, then sure, go ahead and do it :)
Title: Re: LC/NLS for 2002 s4 b5 aa-box tip ? Post by: maxXAM on October 08, 2021, 09:12:36 AM i just wanted it for show i want make some flames :)
Title: Re: LC/NLS for 2002 s4 b5 aa-box tip ? Post by: maxXAM on October 08, 2021, 03:17:15 PM i made an xdf for my aa-boxe based on nefmoto m-box xdf i used Beyond Compare 4 software to compare the 2 bins searching for maps addresses
so i made 2 files file 1 stage 1 tuned file + soft limiter file 2 stage 1 + 2stepscript i tried the 2 files first one all good my car gets more power more boos its about 15psi soft limiter works great the other file the 2stepscript added not working maybe its because my car got tip trany so i want to add brake paddle to get it work i am not using this 2stepscript for launch control i need it just for show Title: Re: LC/NLS Post by: nyet on October 08, 2021, 03:47:36 PM Merged with master thread.
Please read the first few messages. Title: how to add antilag to s4 b5 2002 aa-box tip using 2 step script ? Post by: maxXAM on October 08, 2021, 05:30:23 PM is there any way to make this 2 step script work on automatic s4 maybe using brake paddle signal to trigger the code some one help me please to make this happen i love to get some people impressed when my s4 shoot flames some one told me i have to change the jump to nls code from clutch to brake paddle but i don't know how
i successfully run the 2 step script on my aa-box file and flashed back to the ecu car started ok no fault codes every thing normal but no antilag its wont work may some one help me to make this script to work on automatic s4 here is my ecufile and xdf Title: Re: LC/NLS Post by: nyet on October 08, 2021, 06:27:54 PM stop creating new LC threads.
this is your only warning Title: Re: LC/NLS Post by: maxXAM on October 08, 2021, 07:05:53 PM ok sorry ;D this my first post
Title: Re: LC/NLS Post by: _nameless on October 10, 2021, 10:45:38 PM WTF is a brake paddle?
Title: Re: LC/NLS Post by: maxXAM on October 11, 2021, 05:30:47 AM WTF is a brake paddle? sorry i mean brake pedal i ask if i can use the brake pedal to activate the anti lag on the tiptronicknow i flashed l-box bin on my aa-box to try it out its runs good without any issues ,i did this because i can't find any tune or xdf for my aa-box and i know the both m-box and l-box using the same xdf so now i got l-box instead and full xdf to work with . i been reading the ME7.x_LC_NLS_rev003 pdf over and over know i got little knowledge about it Title: Re: LC/NLS Post by: nyet on October 11, 2021, 01:26:29 PM Please read the first few messages in this topic.
Title: Re: Rolling antilag script Post by: pukacinio on October 20, 2021, 06:28:50 AM Can anybody do step by step instruction from point B: ?
Quote A) run the launch.php script on the original flash. B) run the rollingV2.php script on the original flash with proper offset for both parameters & function. We don't want both stored on the same address! C) Merge both functions & parameters on a final file, while replacing the jump back to UB(on als nls function) with a call (DA) to new function (rolling antilag). Title: Re: Rolling antilag script Post by: xXxCryxXx on October 20, 2021, 07:37:21 AM Can anybody do step by step instruction from point B: ? Look st this forum there are many posts how it works :)Gesendet von iPhone mit Tapatalk Title: Re: Rolling antilag script Post by: tg2000 on October 24, 2021, 04:50:07 AM I'm having trouble adding rolling antilag to my launch control script file
Title: Re: Rolling antilag script Post by: tg2000 on October 24, 2021, 04:50:41 AM I'm having trouble adding anti-lag functions to lc script. Can you show me how you do it in cmd?
Title: Re: Rolling antilag script Post by: xXxCryxXx on October 24, 2021, 04:54:44 AM Deprecated: Array and string offset access syntax with curly braces is deprecate Does not work both are same functions … just use the normal ALS LC NLS becuse this is only for Rolling ALS script becuse it use almost the same Code lile the Original :)d in C:\me7info\rollingv3.php on line 531 finding tsrldyn... found: 380BA4 finding nmot_w... found: 00F89E finding wped... found: 3809A8 finding b_br (brems), brake pedal... found: 00FD4A.14 FTOMN found: 1a601 FTOMN IS: 05 FTOMN CHANGED TO 0x00 Finding a good space for Main Function.. space located at: 0xa6780 Finding a good space for rolling antilag configuration variables.. space located at: 0x173f0 Finding the offset for call to the code cave.. call will be located at: 0xa0b44 Writing lines of code code writed successfully to ori_mod.bin!! REMEMBER TO CORRECT CHECKSUMS BEFORE YOU FLASH THIS FILE, ROLLING ANTILAG FIXED RPM! BRAKE + FULL THROTTLE FOR ACTIVATION! c:\me7info>launch ori_mod.bin ori.ecu 0x173fa 0x6810 finding tsrldyn... found: 380BA4 finding vfil_w... found: 381CB8 finding nmot_w... found: 00F89E finding wped... found: 3809A8 finding tmotlin... found: 384899 finding B_kuppl (clutch pedal)... found: 00FD4C.2 finding b_br (brems), brake pedal... found: 00FD4A.14 Memory Layout: 29F800 Found Found usable status flag variable at 0x00FDbc FTOMN found: 1a601 FTOMN IS: 00 FTOMN CHANGED TO 0x00 Using space given by argument for code cave.. space located at: 0x173fa Using space given by argument for launch control configuration variables.. space located at: 0x6810 using 0x384FF0 for NLS Counter variable Finding the offset for call to the code cave.. call will be located at: 0xa0b44this file have already a code cave here, so we t hink that it have already the launch control, (or an attempt of it), please try using a original ecu! c:\me7info> I'm having trouble adding anti-lag functions to lc script. Can you show me how you do it in cmd? Gesendet von iPhone mit Tapatalk Title: Re: Rolling antilag script Post by: tg2000 on October 24, 2021, 04:59:03 AM But the author of the post wrote that both functions can work in one file, at least that's what the google translator told me, sorry for my English
Title: Re: Rolling antilag script Post by: nyet on October 24, 2021, 10:03:52 AM But the author of the post wrote that both functions can work in one file, at least that's what the google translator told me, sorry for my English Merged with master moron thread. Please read the first few posts of this thread before posting again. Title: Re: Rolling antilag script Post by: stuydub on October 24, 2021, 12:24:54 PM But the author of the post wrote that both functions can work in one file, at least that's what the google translator told me, sorry for my English It does work with both in same file been tried and tested numerous times Title: Re: LC/NLS Post by: beszesc on November 18, 2021, 10:45:58 AM Hello. I have problem with this ecu from BEX. I have few version of script launch control, but none works good with this flash. One time car don't start right away. Second time the car started, but after time ecu reports checkum error. Reflash help on short time and situation repeats itself. Anybody help me? Before I never have a problem with script. I try change NLS counter adress, but it is wrong way.
Title: Re: LC/NLS Post by: bamofo on November 18, 2021, 11:46:41 AM Hello. I have problem with this ecu from BEX. I have few version of script launch control, but none works good with this flash. One time car don't start right away. Second time the car started, but after time ecu reports checkum error. Reflash help on short time and situation repeats itself. Anybody help me? Before I never have a problem with script. I try change NLS counter adress, but it is wrong way. Looks like you did not do the CSM./ If your file is right this file is checksum'd correct Title: Re: LC/NLS Post by: beszesc on November 18, 2021, 01:09:38 PM I'm sorry, of course my bin which I posted have errors now, but when I flashed ecu I check checksum twice. Maybe I change something last time.
On this bin car don't start also when I made some kilometers, although checksums are correct in me7sum. Title: Re: LC/NLS Post by: Sandstorm3k on January 18, 2022, 02:01:23 PM After patching the temp check out of the 1ML906032 file it worked flawlessly on a 50.000 mile BAM engine.
Until the almighty BAM went 'BAM'. Upon further investigation it seems as if the valves and pistons are intact, but the head gasket let go. Cool piece of code, but definitely not worth the risk on a stock turbo/stock engine FWD. Save your stock engines & turbo('s) ::) Edit: blew the engine, bent rod. Did still run though with a hole in the engine. Title: Re: LC/NLS Post by: Sn0w3y on September 27, 2022, 03:01:45 PM Hello guys,
today i tried to add LC and NLS to my Files :P i successfully added LC and i thought NLS aswell - i did not use script BUT i orientated myself on the .pdf v3 :D can somebody just give me a hint so i can learn what i did wrong? Title: Re: LC/NLS Post by: BlackT on September 28, 2022, 05:14:35 AM Hello guys, You dont need NLS beacuse it work really bad, 200ms is to slow to gearbox, and after shifitng you will have masive retard and power losstoday i tried to add LC and NLS to my Files :P i successfully added LC and i thought NLS aswell - i did not use script BUT i orientated myself on the .pdf v3 :D can somebody just give me a hint so i can learn what i did wrong? Title: Re: LC/NLS Post by: Sn0w3y on September 28, 2022, 08:58:34 AM You dont need NLS beacuse it work really bad, 200ms is to slow to gearbox, and after shifitng you will have masive retard and power loss I want to have it so bad even if it works bad :D so i should set it higher? Which ammount of ms do you recommend? Title: Re: LC/NLS Post by: Sandstorm3k on September 28, 2022, 03:37:46 PM I want to have it so bad even if it works bad :D Pay someone so i should set it higher? Which ammount of ms do you recommend? Title: Re: LC/NLS Post by: Sn0w3y on September 29, 2022, 01:36:04 AM Title: Cheksum and 2step Post by: JeanAwt on April 18, 2023, 10:05:36 AM hello, it's been several times that the cheksum clears the script. what is the problem?thank you
Title: Re: Cheksum and 2step Post by: nyet on April 18, 2023, 10:48:28 AM What does "clears the script" mean?
Title: Re: Cheksum and 2step Post by: JeanAwt on April 18, 2023, 11:03:47 AM sorry I'm not specific, in fact I have the 2step script and sometimes the checksum signals me 2 errors. if I validate the checksum it erases the first 5 lines of the launch
the answer must be simple but I do not see it. each modification on my file with the launch the checksum removes these 5 lines. I do not understand Title: Re: Cheksum and 2step Post by: Blazius on April 18, 2023, 12:05:15 PM sorry I'm not specific, in fact I have the 2step script and sometimes the checksum signals me 2 errors. if I validate the checksum it erases the first 5 lines of the launch the answer must be simple but I do not see it. each modification on my file with the launch the checksum removes these 5 lines. I do not understand What checksum erases the lines??? I have written custom code , put it in the middle of bumfuck nowhere etc and me7sum works perfectly to this day. Title: Re: Cheksum and 2step Post by: JeanAwt on April 18, 2023, 12:31:57 PM sorry, I'm not expressing myself well. a friend put me the 2step script for the launch. it works well but me if I modify this file on any map the checksum ols 232 me7 on ols deletes me these 5 lines at the end of the file on the 9 lines it deletes 5. and I no longer launch it. I am a noob I have not yet read or studied how to put the script I guess until it is it's 9 last lines to add. If you don't want to answer I understand.
Title: Re: Cheksum and 2step Post by: fknbrkn on April 18, 2023, 12:59:48 PM There is no answer on "something checksum removes something script at something offset in something file"
Title: Re: Cheksum and 2step Post by: _nameless on April 18, 2023, 03:33:35 PM hello, it's been several times that the cheksum clears the script. what is the problem?thank you The script fucks up rsa signatures on some software versions. You can patch it manually or cc00 the jumps. If you are trying to patch a 512kb file the script only works with 1mb files Title: Re: Cheksum and 2step Post by: nyet on April 18, 2023, 04:12:22 PM sorry, I'm not expressing myself well. a friend put me the 2step script for the launch. it works well but me if I modify this file on any map the checksum ols 232 me7 on ols deletes me these 5 lines at the end of the file on the 9 lines it deletes 5. and I no longer launch it. I am a noob I have not yet read or studied how to put the script I guess until it is it's 9 last lines to add. If you don't want to answer I understand. Merged with master moron thread. Please reread https://nefariousmotorsports.com/forum/index.php?topic=12559.msg122158#msg122158 carefully. Especially the parts in red. Long story short, you chose a terrible place to put the code, since winols clearly thinks its not a region that should be altered. Though it is unclear what "5 lines at the end of the file" means, because that's total gibberish. Title: Re: LC/NLS Post by: JeanAwt on April 18, 2023, 10:04:28 PM a friend gave it to me. because I haven't read the subject yet and how to place it in the file. it was just a question to try to understand the problem. yes, I also think that he must have positioned it in the wrong place. thank you for your answers. I will post the file if you have time to look.
Title: Re: LC/NLS Post by: nyet on April 18, 2023, 10:24:47 PM Did you read ALL of the text in red?
Title: Re: LC/NLS Post by: JeanAwt on April 20, 2023, 09:36:56 PM the problem was a bug with winols crack, it erased my ols.cfg files. I reinstalled everything. and now it works
Title: Re: LC/NLS Post by: Pilsnneer on May 27, 2023, 02:03:53 PM Hello gentlemen!
I must admit that I am a noob in the world of ME7 and tuning in general. Tuning is not and will never be my earnings. On a daily basis, I am a mechanic of John Deere forest machines (in these machines we can talk about controllers :)) I am the owner of a B6 Cabrio 1.8t BFB. But to the point. I made one modification attempt but failed (terribly limited time). And now I have a question for you. Would anyone be willing to convert my file to add an LC/NLS script? Of course you will pay for a good solution :) Please contact me via PM or Whatsup. Greetings everyone! Title: Im Stuck ME7.5 LC Post by: Ghost1312_ on December 04, 2023, 01:54:14 PM Hello everyone, I apologize in case this comes across as a bit noobish... This is my first post in the forum. I was planning to program Launch Control and No Lift Shift on my Audi TT 1.8T AJQ. I managed to do it, but not as I wanted. Unfortunately, I'm stuck and don't know how to proceed. The Launch Control only works at 0 km/h, although it should work independently of the speed. The NLS also only works at 5500 rpm, when it should be at 4500 rpm, and I can't get the shift time right. I intended to set the duration of the shift to 0.5 seconds, but I can't figure it out. Can someone please help me? Thanks in advance.
Title: Re: Im Stuck ME7.5 LC Post by: justinvw2646 on December 04, 2023, 05:34:32 PM If I am understanding correctly you want to change the parameters for the functions?? If so you need to look at the addresses where the script placed them and add them to your XDF. Then you can change the speed, rpm, time, etc.There is a guide floating around that describes how to do this in detail with screen shots
Title: Re: Im Stuck ME7.5 LC Post by: Ghost1312_ on December 04, 2023, 05:52:42 PM I searched for them but didnt find them. Maybe because its a 512kb file?
Title: Re: Im Stuck ME7.5 LC Post by: aef on December 05, 2023, 02:03:27 AM How did you add the custome code to the file if you have no clue?
Title: Re: Im Stuck ME7.5 LC Post by: Ghost1312_ on December 05, 2023, 04:53:38 AM A friend of mine helped me do it. But He is in the army and since sunday he's in mali until february
Title: Re: Im Stuck ME7.5 LC Post by: Ghost1312_ on December 05, 2023, 04:55:48 AM As i said, im still learning and in the beginning. But i try to learn as much as possible from the forum and from you guys
Title: Re: Im Stuck ME7.5 LC Post by: aef on December 05, 2023, 06:11:10 AM Speed Threshold is 3km/h
Launch RPM is 4500 NLS Cut duration is 100ms NLS RPM Threshold is 5500 Accelpedal Treshold is 90% Temperatur Protection is -2 degree celsius Title: Re: Im Stuck ME7.5 LC Post by: Ghost1312_ on December 05, 2023, 07:00:54 AM Thank you very much.
Could you briefly explain how you find them? Title: Re: Im Stuck ME7.5 LC Post by: AllaNoN on December 05, 2023, 07:40:04 AM Already seen this thread ?!
http://nefariousmotorsports.com/forum/index.php?topic=607.0title= Don´t Pin on the location like 0008b3a0h. It´s different from ECU to ECu. Otherwise: https://s4wiki.com/wiki/Tuning https://files.s4wiki.com/docs/ME7.x_LC_NLS_rev003.pdf Title: Re: Im Stuck ME7.5 LC Post by: nyet on December 05, 2023, 11:51:16 AM LC is not the place to start learning anything. It's mostly trash.
Merged to master LC moron thread. |