NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Taking a backup of instrument cluster EEPROM
Pages: 1 [2]
« previous next »
Author Topic: Taking a backup of instrument cluster EEPROM  (Read 16214 times)
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #15 on: February 03, 2016, 05:45:11 AM »
I have used Vag Eeprom programmer in the past and it is a nice software but I have notice that V1.19 versions around there are something unstable. Seems to me that V1.18 is better. Another trick during my research, tests and usage that makes V1.18 & V1.19 versions works better is to update KKL dll driver to same one used by VCDS Lite, for example. In other words take RT-USB.dll from VCDS directory, copy into Vag Eeprom programmer directory and rename as existing file VAGUSB.dll. That have done wonders with some tricky Clusters and Airbag modules too. Also don´t forget to check USB as port option.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #16 on: February 03, 2016, 12:59:12 PM »
Quote from: eliotroyano on February 03, 2016, 05:45:11 AM
I have used Vag Eeprom programmer in the past and it is a nice software but I have notice that V1.19 versions around there are something unstable. Seems to me that V1.18 is better. Another trick during my research, tests and usage that makes V1.18 & V1.19 versions works better is to update KKL dll driver to same one used by VCDS Lite, for example. In other words take RT-USB.dll from VCDS directory, copy into Vag Eeprom programmer directory and rename as existing file VAGUSB.dll. That have done wonders with some tricky Clusters and Airbag modules too. Also don´t forget to check USB as port option.

Great info, thanks for sharing. Do you have a link to V1.18?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #17 on: February 05, 2016, 06:11:02 AM »
Quote from: vwaudiguy on February 03, 2016, 12:59:12 PM
Great info, thanks for sharing. Do you have a link to V1.18?

Here is......... Wink  Wink. Just put directory in hard disk root.
Logged
Lupsnow
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« Reply #18 on: February 11, 2016, 04:34:41 AM »
It worked for me with my new KKL cable with ch340 chip!!
Logged
quip
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #19 on: September 08, 2017, 06:37:22 PM »
Quote from: Dave9n3 on February 01, 2016, 03:24:34 PM
Still unable to get a cluster read of mine Sad I've tried a fair few programs and it seems to say EEPROM area blocked. Dash is VDO V06

Sorry to revive an old thread, but I'm having this exact issue. Did you ever find a solution, Dave9n3?
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 12:55:35 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)