Here it is folks ECUX, found it on another forum

Pages: 1 2 3 [4]

« previous next »

Author

Topic: Here it is folks ECUX, found it on another forum (Read 53669 times)

vtraudt

Sr. Member

Karma: +4/-7
Offline

Offline

Posts: 377

	MAF reading in ECUx « Reply #45 on: December 24, 2011, 07:15:55 AM »

I did some log runs yesterday (2002 Allroad manual 2.7T, stage 2).
Everything worked with ECUx.
But not sure about the numbers for MAF. My max reading was 280 g/sec (most in mid to high 275 g/sec). IIRC, the (Hitachi?) MAF I have can only read up to 220 g/sec? If not, what IS the limit of the stock MAF in my car?


	Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock

vtraudt

Sr. Member

Karma: +4/-7
Offline

Offline

Posts: 377

	ECUx MAF readings « Reply #46 on: December 24, 2011, 11:36:46 AM »

Well, just did another log run, this time with VAGcom. Similar MAF readings (275 g/sec). So the 280 g/sec peak ECUx showed could be valid.

That leaves the question: what is the limit for my MAF ? (2002 Allroad manual 2.7T).

Does the old rule of thumb g/sec x 1.25 = cHP hold for the 2.7T? (280 g/sec would equate ca. 350 crank HP)


	Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Here it is folks ECUX, found it on another forum « Reply #47 on: December 24, 2011, 12:31:50 PM »

No point in even trying to estimate HP via MAF... you already have a log, run it through ECUxPlot


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

vtraudt

Sr. Member

Karma: +4/-7
Offline

Offline

Posts: 377

	ECUx Plot - HP? « Reply #48 on: December 24, 2011, 02:20:08 PM »

And ECUx Plot spits out cHP?
Also: did I miss the torque data? Or not part of the "120" or "M" group, but available elsewhere?


	Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: ECUx Plot - HP? « Reply #49 on: December 24, 2011, 06:03:41 PM »

Quote from: vtraudt on December 24, 2011, 02:20:08 PM

And ECUx Plot spits out cHP?

yes.

Quote

Also: did I miss the torque data? Or not part of the "120" or "M" group, but available elsewhere?

Torque data from the ECU isn't what you think it is.

Might want to do a quick ME7 refresher.


	Logged

TTQS

Guest

	Re: ECUx Plot - HP? « Reply #50 on: December 25, 2011, 05:08:13 AM »

Quote from: nyet on December 24, 2011, 06:03:41 PM

Torque data from the ECU isn't what you think it is. Might want to do a quick ME7 refresher.

Humour me because I have missed previous discussion. Which of the multitude of torque variables does VCDS return in Measuring Block 120?

TTQS


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Here it is folks ECUX, found it on another forum « Reply #51 on: December 25, 2011, 09:46:35 AM »

nmot
miasrs_w
miist_w
miasrl_w


	Logged

vtraudt

Sr. Member

Karma: +4/-7
Offline

Offline

Posts: 377

	ECUx works on other ECUs? « Reply #52 on: December 29, 2011, 07:04:14 AM »

Can ECUx also be used on other ECUs?
For example: 1998 A4 1.8T manual
8D0 907 557 N


	Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock

Jason

Hero Member

Karma: +38/-0
Offline

Offline

Posts: 500

Breaks everything!

	Re: Here it is folks ECUX, found it on another forum « Reply #53 on: December 29, 2011, 08:30:56 PM »

Quote from: nyet on December 22, 2011, 04:32:58 PM

What a huge waste of time. Just use ME7l and ditch ECUx once and for all

Quoted for truth.


	Logged

vtraudt

Sr. Member

Karma: +4/-7
Offline

Offline

Posts: 377

	Re: Here it is folks ECUX, found it on another forum « Reply #54 on: December 30, 2011, 05:05:28 AM »

Quote from: Jason on December 29, 2011, 08:30:56 PM

Quote from: nyet on December 22, 2011, 04:32:58 PM

What a huge waste of time. Just use ME7l and ditch ECUx once and for all

Quoted for truth.

What was the question you are trying to answer?


	Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Here it is folks ECUX, found it on another forum « Reply #55 on: December 30, 2011, 06:51:57 PM »

Friends don't let friends use crippled proprietary buggy abandonware


	Logged

Pages: 1 2 3 [4]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 12:51:33 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search