NefMoto > Technical > Tuning > 18014/P1606 after wideband/ecu swap
Pages: [1]
« previous next »
Author Topic: 18014/P1606 after wideband/ecu swap  (Read 2923 times)
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« on: July 23, 2021, 02:14:31 PM »
Car is B5 A4 fwd without  CAN, ASR, or ESP.

18014 - Rough Road/Engine Torque Signal from ABS
            P1606 - 35-00 - Electrical Malfunction

Keep getting this code while taking care of differences of equipment after wideband turbo ecu swap, also had the standart Instrument cluster missing message, which was taken care of using CW_CAN_R ofcourse.

Also ECU is correctly coded for the config, aswell as the instrument, did not check the ABS module yet but it is as it was before.
Anyone managed to figure this out? Search showed that some people on the S4's had this issue with no real solution, is this just an ABS module mismatch? As long as ABS works fine like before it should not be an issue anyway.

Cheers.
« Last Edit: July 23, 2021, 02:21:19 PM by Blazius » Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1422
« Reply #1 on: July 23, 2021, 03:13:50 PM »
Does your car have ESP?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« Reply #2 on: July 23, 2021, 05:02:40 PM »
Quote from: BlackT on July 23, 2021, 03:13:50 PM
Does your car have ESP?

Come on man Smiley

Quote from: Blazius on July 23, 2021, 02:14:31 PM
Car is B5 A4 fwd without  CAN, ASR, or ESP.
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1422
« Reply #3 on: July 23, 2021, 10:46:59 PM »
I don't know what you asking? Your ABS schould work fine
Just code out that DTC from ECU
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« Reply #4 on: July 24, 2021, 12:15:39 AM »
Quote from: BlackT on July 23, 2021, 10:46:59 PM
I don't know what you asking? Your ABS schould work fine
Just code out that DTC from ECU

Yes , however I would want to take of it properly instead of disabling DTCs. Why is it still expecting a signal?
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1422
« Reply #5 on: July 24, 2021, 12:36:03 AM »
Beacuse ESP/ASR
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« Reply #6 on: July 24, 2021, 07:00:12 AM »
Quote from: BlackT on July 24, 2021, 12:36:03 AM
Beacuse ESP/ASR

Well like I said car has no esp/asr car is coded for it too, softcoding exists too soo yeah.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« Reply #7 on: May 09, 2023, 04:47:10 PM »
Update on this:
This error can be hidden/ solved via the codeword CDSWE.

Why:
This error is related to the function DSWEC, per FR google translate:

Code:
The task of the %DSWEC is to use the transmitted wheel acceleration bsc
to recognize. As soon as a bad stretch of road is detected, the B_swe bit is set, whereupon e.g.
detection is temporarily hidden (see also %DMDSTP). The blanking is necessary because bad roads
Drive train vibrations can lead to an incorrect detection of misfires.

Basically it tries to detect "bad road" sections to detect drivetrain NVH because it could interfere with misfire detection. Safe to say if you dont have misfire detection or you dont have a CAN car/setup, you need to disable this function to get rid of this error.
« Last Edit: May 09, 2023, 04:49:07 PM by Blazius » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • June 30, 2024, 09:55:50 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 17 queries. (Pretty URLs adds 0s, 0q)