NefMoto > Technical > Tuning > Anyone have the OE characterization for lpfp in 2020+ RSQ8 or Urus?
Pages: [1]
« previous next »
Author Topic: Anyone have the OE characterization for lpfp in 2020+ RSQ8 or Urus?  (Read 855 times)
mtb703
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 37
Using this pump on another project, hoping to avoid buying a mappack for just one map.

Thanks!
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #1 on: April 14, 2024, 03:02:26 AM »
Not sure how useful it is going to be.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
mtb703
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 37
« Reply #2 on: April 14, 2024, 06:28:59 AM »
I'm sure there's some PID control that would get my duty cycle where it needed to be, but was hoping to get it right in calibration.

This is exactly what I wanted.

Thanks man!
Logged
quattro85
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 79
« Reply #3 on: April 14, 2024, 09:12:21 AM »
And here the one from B8.5 2.0T EA888.2....

Looking at the numbers - is it means RSQ8 LPFP is not much more (if any) productive than standard 2.0T LPFP?
Logged
mtb703
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 37
« Reply #4 on: April 14, 2024, 12:09:16 PM »
Yeah, I was converting the g/min to lph and its way low for the pump, which is a variant of the Veyron pump.

Sent from my Pixel 4 using Tapatalk
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 02:58:41 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)