NefMoto > Technical > Tuning > Aftermarket boost solenoid hooked up to N75 harness
Pages: [1]
« previous next »
Author Topic: Aftermarket boost solenoid hooked up to N75 harness  (Read 7538 times)
orienz
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 113
« on: August 06, 2011, 01:24:14 AM »
Can i controll some aftermarket boost solenoid with ME7 ECU? Did anyone attempt this? Idea comes from Mitsubishi/Subaru people. They hook up "better" boost solenoid to factory harness and use ECU to control it. This would eliminate the need of EBC.

Thanks for any input.
Logged
orienz
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 113
« Reply #1 on: August 06, 2011, 01:25:32 AM »
By the way I have something like this:

http://www.ebay.co.uk/itm/3-Port-Boost-Controller-Solenoid-Apexi-AVC-R-AVCR-/220812366921?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3369715449#ht_836wt_1139

Most of aftermarket EBC controllers are using this valve. It's made by Mac. It's supposed to be good.
« Last Edit: August 06, 2011, 05:00:52 AM by orienz » Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056
« Reply #2 on: August 06, 2011, 07:52:17 AM »
The MAC valves are good I've used them on standalones before... and I don't see why you can't use it as long as you completely retune the ECU to use it properly.

The MAC will most certainly operate at a different frequency then the original N75, the pintle reaction times will be different... so it's not going to be just a pnp setup.
Logged
SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
orienz
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 113
« Reply #3 on: August 07, 2011, 11:41:35 AM »
Any starting points? This is getting it to work under Eurodyne Maestro. Maestro has 4 maps that control "boost".

Boost PID
Boost duty
Maximum VE
Maximum VE under knock

They are labeled this way so I guess I should play with Boost PID and Boost Duty, right? While I do get what Boost duty is I have no idea what Boost PID is and what it does.
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923
« Reply #4 on: August 10, 2011, 11:32:54 AM »
not being "smart" or anything but you should REALLY google "PID controller" and read about it to understand what it is...
Logged
DonSupreme
Newbie
*

Karma: +3/-1
Offline Offline

Posts: 22
« Reply #5 on: August 11, 2011, 07:35:42 AM »
Quote from: NOTORIOUS VR on August 06, 2011, 07:52:17 AM
The MAC valves are good I've used them on standalones before... and I don't see why you can't use it as long as you completely retune the ECU to use it properly.

The MAC will most certainly operate at a different frequency then the original N75, the pintle reaction times will be different... so it's not going to be just a pnp setup.

Can you adjust the freq value in the flash? I would like to think Bosch would be smart enough to provide a variable that can be adjusted just in case of a product revision or using the ecu on another system all together?
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056
« Reply #6 on: August 11, 2011, 10:22:40 AM »
that is a good question that I don't have the answer to lol
Logged
SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
orienz
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 113
« Reply #7 on: August 11, 2011, 12:25:40 PM »
hey julex, no man I understand what it is...approximately but I just don't see how ME7 is actually controlling it. As far as I can tell there are like two tables (at least in Maestro) and there should be 3 different variables (p,i,d) but there is only one. Another table is duty cycle...i get this one.

It's very confusing...
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 12:06:43 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)