Pages: 1 2 [3]
Author Topic: nmax problem after installing RS4 ECU into S4  (Read 20853 times)
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6040


« Reply #30 on: September 17, 2012, 06:21:40 AM »

No, i have find yesterday i think that my 551F file definition has a mistake on this map, now i adjust and find it:


I will test on the car next week.


IIRC 551F has 6 values and 551K 4 values in this map.
But now in the last screenshot the map is stock. Just set the entire map to the same value because with S4 cluster you won't have oil temp signal, and it will assume always a high temperature.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Michel94
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 31


« Reply #31 on: September 17, 2012, 06:38:47 AM »

Yes PRJ, 1st map is Oil temperature VS RPM in my 551F damos. I change value of it in the screenshot to 7200 but the car limit run always to 6000rpm max.

I think i find error in this map, in this damos.

2nd screenshot is the same map whit other property that i have set,damos modification,  i've not change value in the screen shot, they are stock.

I change 6000 and 6500 to be sur to 7200, i will try this in the car next week.
Logged
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6040


« Reply #32 on: September 17, 2012, 06:59:02 AM »

Btw I recommend flashing that ECU with 551K.

551F has no misfire detection. A lot harder to diagnose misfires.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)