Pages: [1]
Author Topic: dash Lights  (Read 5234 times)
bennyboi
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 33


« on: June 12, 2016, 11:38:21 PM »

Hi,

I have retro fitted a Audi 8L dash, cluster and 1.8t engine in to an old mk2 scirocco, now i have the engine running no problems, but i want to disable to the airbag light on my dash along with the ESP light and ABS light, i don't want to remove the bulbs from the ABS as i will be running ABS in the future.

any tips on how i can do this? i have a nice selection of tools, VCDS/vagtacho/VagKcommander

my cluster has the following part numbers

Part No: 8L0 920 980 P
Component: KOMBI+WEGFAHRS. M73 D06
Coding: 00444
Shop #: WSC 00272
VCID: 4088D82F4090643E1D-4A3A

many thanks.
Logged
H2Deetoo
Sr. Member
****

Karma: +26/-1
Offline Offline

Posts: 257


« Reply #1 on: June 13, 2016, 03:19:33 AM »

I know for some VW clusters (NEC+24C64) there are some bits in eeprom you can change to disable ABS and ESP icons.
Can you post your eeprom here so I can take a look?


Rgs H2Deetoo
Logged
bennyboi
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 33


« Reply #2 on: June 13, 2016, 06:47:57 AM »

I know for some VW clusters (NEC+24C64) there are some bits in eeprom you can change to disable ABS and ESP icons.
Can you post your eeprom here so I can take a look?


Rgs H2Deetoo

let me get home friday and ill give it a go Smiley not had much luck dumping anything from these via OBD yet ha!

cheers Smiley
Logged
H2Deetoo
Sr. Member
****

Karma: +26/-1
Offline Offline

Posts: 257


« Reply #3 on: June 14, 2016, 05:22:39 AM »

If OBD won't work then do it the hard way Wink
Logged
ruia4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #4 on: August 19, 2016, 01:16:46 PM »

Hi,

I have retro fitted a Audi 8L dash, cluster and 1.8t engine in to an old mk2 scirocco, now i have the engine running no problems, but i want to disable to the airbag light on my dash along with the ESP light and ABS light, i don't want to remove the bulbs from the ABS as i will be running ABS in the future.

any tips on how i can do this? i have a nice selection of tools, VCDS/vagtacho/VagKcommander

my cluster has the following part numbers

Part No: 8L0 920 980 P
Component: KOMBI+WEGFAHRS. M73 D06
Coding: 00444
Shop #: WSC 00272
VCID: 4088D82F4090643E1D-4A3A

many thanks.

blue plug - pin 32 -> ground
Green Plug - Pin 10, 21 -> ground.

Logged
bennyboi
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 33


« Reply #5 on: September 05, 2016, 07:10:02 AM »

blue plug - pin 32 -> ground
Green Plug - Pin 10, 21 -> ground.


Many thanks Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)