Copy VIN to new(used) cluster ?

Pages: [1]

« previous next »

Author

Topic: Copy VIN to new(used) cluster ? (Read 5562 times)

buergi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 13

	Copy VIN to new(used) cluster ? « on: July 21, 2016, 05:01:56 PM »

Hello wizards of clusters and ecus.
A friend bought a 2002 RS6 without engine control unit and a cluster that somehow can`t read transponders-> No driving possible...
So we bought a spare ECU and a spare cluster (both used) and adapted everything so the car is capable of running.
But now we have another car's VIN in the Cluster and the ECU. Is it possible to somehow restore the original VIN ? What is the easiest way to do it ?
Can i just edit the VIN in the cluster dump and upload it using K+CAN Commander 2.5 from this forum, or will i end up with "def." cluster ? Are there any checksums to be corrected ? Is the eeprom encrypted ?

Original cluster dump attached. It is 4B0920937B
Spare Cluster is the same, but other VIN/SKC/IMMOID/KEYS
ECU is ME7.1.1 4D1907558

Any hints appreciated.

Buergi


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: Copy VIN to new(used) cluster ? « Reply #1 on: July 21, 2016, 05:13:34 PM »

yes, you can overwrite the vin and rechecksum, but you will have to re-adapt the immo or disable it entirely.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

buergi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 13

	Re: Copy VIN to new(used) cluster ? « Reply #2 on: July 21, 2016, 05:30:00 PM »

Quote from: nyet on July 21, 2016, 05:13:34 PM

yes, you can overwrite the vin and rechecksum, but you will have to re-adapt the immo or disable it entirely.

Ok, is there any information available on how to rehecksum the immo eeprom ?
Is it sufficient to recode the cluster in order to repair the checksum ?

Thanks a lot..


	Logged

ianpgonzaga

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: Copy VIN to new(used) cluster ? « Reply #3 on: July 22, 2016, 05:40:38 AM »

Quote from: buergi on July 21, 2016, 05:30:00 PM

Ok, is there any information available on how to rehecksum the immo eeprom ?
Is it sufficient to recode the cluster in order to repair the checksum ?

Thanks a lot..

just search vag eprom programmer - it will fix up the checksum as you edit the values on the right hand side (you'll see what i mean when you open the eeprom file)


	Logged

buergi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 13

	Re: Copy VIN to new(used) cluster ? « Reply #4 on: July 22, 2016, 09:48:55 PM »

I tried VAG eeprom programmer 1.19 but when i changed the VIN in the cluster file, it die not change other values. Which Version do you recommend ?


	Logged

ianpgonzaga

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: Copy VIN to new(used) cluster ? « Reply #5 on: July 24, 2016, 06:15:00 AM »

ohhh crap sorry i told you the wrong info

(it was a while that i did this)

- i used my VIN from the ECU pull and edited the hex coding which then changes the values on the right hand side.

you must make sure you commit the changes and upload to the cluster

should work

and then you need to match it using ross tech software


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 09:23:13 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search