Pages: [1]
Author Topic: VAG EDC15P+ interchangeable?  (Read 3286 times)
Lauria112
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39


« on: October 04, 2016, 03:39:28 AM »

Hi,

i bought Passat with 1.9TDI (ATJ) and on the way home it blew the head gasket. After considering my options, decided to get partial refund from seller and look for new engine.
Now I got good offer of 1.9TDI (AVF) which is newer and with only 240 000km. Only thing is that seller was not able to get the ECU for it right now (would take month or so) as it is in another location as the engine.

So my question is, can i:
I) run the engine with current ECU (038 906 019 DM), with some fine tuning
II) run the engine with my ecu, flashed with AVF ECU bin
III) I have to get ECU for AVF (found 038 906 019 GQ near by, but would cost almost the same as the engine)

Thank you all for your great help
Lauri
Logged
turbojohan
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 185


« Reply #1 on: October 04, 2016, 11:23:43 AM »

You can cross flash AVF software on ATJ ecu.
You can also make AVF work on ATJ software.
Turbo is almost the same, just 1 mm bigger compressor inducer.
AVF has 3 bar mapsensor and bigger injectors.
But that's all, you can make it work on ATJ sw.

Johan
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)