Pages: 1 [2]
Author Topic: me7.5 coding out ABS and airbag modules missing.( not on can gateway)  (Read 12792 times)
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #15 on: October 19, 2016, 10:23:34 PM »

Set these two location to 00 in your file.

0x107A7
0x10802

Don't forget to checksum before flashing.

This did not work? Are there other DTC's? Why not post the DTC? Don't make us beat it out of you.  Grin
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55


« Reply #16 on: October 20, 2016, 01:35:20 PM »

hahah no it did. i made another thread but it ot closed and merged into this..... your help was perfect!

i had one more dtc to get rid of, but dont want to disable the system, just the dtcs

17834 - EVAP Purge Valve (N80): Open Circuit        P1426 - 35-00 - -
and
P2261/008801 - Boost Pressure Control Valve (N249): Mechanical Malfunction

i tried to follow the sticky, but the locations arent the same in my file. im a learn by example kinda guy... that wy i wanted someone to tell me the answer first.. then how they arrived at that answer

then thats it, i swear.....thanks for the help vwguy Grin

Logged
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55


« Reply #17 on: October 23, 2016, 07:47:47 PM »

Bump


Sent from my iPad using Tapatalk
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #18 on: October 23, 2016, 09:14:35 PM »

i had one more dtc to get rid of, but dont want to disable the system, just the dtcs

17834 - EVAP Purge Valve (N80): Open Circuit        P1426 - 35-00 - -
and
P2261/008801 - Boost Pressure Control Valve (N249): Mechanical Malfunction

Either fix the problem or disable the system through ESCONF and codewords (if the hardware isn't there).

NEVER just disable the DTCs, you never know if there are side effects.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55


« Reply #19 on: November 04, 2016, 07:52:54 PM »

speaking on this from 2 weeks after this thread was started, i wish i picked up on that the first time around... everything is configured properly via eskonf

:thumbsup:
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)