caddy2E
Newbie
Karma: +0/-0
 Offline
Posts: 3
|
 |
« Reply #810 on: April 21, 2020, 11:00:22 AM »
|
|
|
"Could not be" your code because you did try and it wont work?
No, i do not try it. FF FF as one unit is 65535, FF + FF is 255 255. Both are more than 4 digitis plus a zero in front of it. 0?  is the format of the login code... Sincerly, caddy2E |
|
|
|
|
Logged
|
|
|
|
|
aef
|
|
« Reply #811 on: April 21, 2020, 12:21:03 PM »
|
|
|
its 5 digits but you have to use a zero as first digit IF the calculation from hex to dec will give only 4 digits  |
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #812 on: April 21, 2020, 01:39:22 PM »
|
|
|
Hello together!
i have an Audi TT MK1 and needs the login code to adapt a second key. Now I'm proud to have gone too far, i read out my ecu with the nice tool.
As i have a look at the position 32/33 and 42/43, i was really surprised. Both values are FF FF.
When i convert this values to decimal, i get the value 65535. This could not be my code. Looks i at the wrong position?
Thanks for help,
caddy2E
Its immo2 so no pin code and that is why there are FF FF Just read out pin from cluster ( i know the dreaded Jeager/ MM ) |
|
|
|
|
Logged
|
|
|
|
caddy2E
Newbie
Karma: +0/-0
Offline
Posts: 3
|
|
« Reply #813 on: April 22, 2020, 04:14:13 AM »
|
|
|
Its immo2 so no pin code and that is why there are FF FF
Just read out pin from cluster ( i know the dreaded Jeager/ MM )
Ok, yes, it seems to be an Magenti Marelli Cluster. Here i could read out also a bin file with a vag tool. But i do not know, on which position i can read the code. Can you help me? Thanks a lot, caddy2E |
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #814 on: May 04, 2020, 01:13:25 AM »
|
|
|
Upload the dump
|
|
|
|
|
Logged
|
|
|
|
daemqn
Newbie
Karma: +0/-0
Offline
Posts: 1
|
|
« Reply #815 on: May 05, 2020, 09:02:15 AM »
|
|
|
I have a 1999 AUDI TT 8N (mk1) too and I want to get the pin. I tried every version of this 35ko prog of heaven  but I got errors.... It seems to communicate but the dump never succeed, sometimes it fail after a few seconds or just 1 sec. My cable is a generic one. I have no problem with vcds lite The only thing I am not sure, is when do I launch the exe ? When the yellow key is displayed when inserting key ? Is there a timing ? Do you have any Idea ? Thanks C:\Users\val_i\Desktop\me7>me7_95040.exe -p2 --OBD -r tt-95040.bin
Ver: 1.31
Com Port: 2
Baud Rate: 10400
Opening COM2 ... OK
Initiating communication ... FAIL. (error=0x01)
Closing COM2
C:\Users\val_i\Desktop\me7>me7_95040.exe -p2 --OBD -r tt-95040.bin
Ver: 1.31
Com Port: 2
Baud Rate: 10400
Opening COM2 ... OK
Initiating communication ... OK
ECU ID response: 8N0906018AB
1.8L R4/5VT
0002
SoftCod: 05500, WSC: 06435
Reading EEPROM ......FAIL. (error=0x01)
Closing COM2
C:\Users\val_i\Desktop\me7>me7_95040.exe -p2 --OBD -r tt-95040.bin
Ver: 1.31
Com Port: 2
Baud Rate: 10400
Opening COM2 ... OK
Initiating communication ... OK
ECU ID response: 8N0906018AB
1.8L R4/5VT
0002
SoftCod: 05500, WSC: 06435
Reading EEPROM ..........FAIL. (error=0x01)
Closing COM2 |
|
|
|
« Last Edit: May 05, 2020, 09:04:19 AM by daemqn »
|
Logged
|
|
|
|
jochen_145
Full Member
Karma: +9/-4
Offline
Posts: 177
|
|
« Reply #816 on: May 05, 2020, 11:39:40 AM »
|
|
|
Ok, yes, it seems to be an Magenti Marelli Cluster. Here i could read out also a bin file with a vag tool. Witch tool do you use to read the Magneti Marelli cluster ? |
|
|
|
|
Logged
|
|
|
|
hanksy2008
Newbie
Karma: +0/-0
Offline
Posts: 2
|
|
« Reply #817 on: June 18, 2020, 03:05:09 PM »
|
|
|
Hi all, I'm currently struggling to write an immo off file to my me7.5 I have had various errors and solved them through lots of reading on here, I cant find anything on this though!! I keep getting Initilizing registers . . . FAIL . (error=0×40D01) Could anyone point me in the right direction I'm ready to pay someone to immo off the ecu now as this is the last step in my mk2 jetta 1.8t conversion to get the engine running Thanks in advance Sent from my SM-G965F using Tapatalk  |
|
|
|
|
Logged
|
|
|
|
|
aef
|
|
« Reply #818 on: June 19, 2020, 02:12:41 AM »
|
|
|
please post the whole screen using snapshot or copy the text
please dont take a picture with your mobile phone from your screen
|
|
|
|
|
Logged
|
|
|
|
Skybroi
Newbie
Karma: +1/-0
Offline
Posts: 8
|
|
« Reply #819 on: July 01, 2020, 01:22:22 PM »
|
|
|
Hello, great job, thank you very much. I read kefico Me 7.9.7 on Boot Mode!
|
|
|
|
|
Logged
|
|
|
|
Briandutch
Newbie
Karma: +0/-1
Offline
Posts: 5
|
|
« Reply #820 on: July 02, 2020, 07:30:20 AM »
|
|
|
Anyone who understand this how to do ? Contact me please. I can pay if needed.
|
|
|
|
|
Logged
|
|
|
|
Briandutch
Newbie
Karma: +0/-1
Offline
Posts: 5
|
|
« Reply #821 on: July 02, 2020, 08:08:40 AM »
|
|
|
Anyone who understand this how to do ? Contact me please.
I want my immo off I got an Seat Leon 1m 1.8 20VT ECU ME7.5
My english is not the best but I can understand alot. I can pay if needed if somebody wants to learn me clearly.
Thanks!
|
|
|
|
|
Logged
|
|
|
|
|
aef
|
|
« Reply #822 on: July 02, 2020, 10:46:25 PM »
|
|
|
This is not how it works...
If you pay a prostitute do you only lay down and wait?
please try it ony your own and post pictures of your problem.
|
|
|
|
|
Logged
|
|
|
|
Bumequipment
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #823 on: July 21, 2020, 06:16:44 AM »
|
|
|
ok ladies and gents i have come a very long way in my journey to learn all this ME7 ECU coding. Its incredible what ArgDubs tool can do I am stuck trying to get an SKC from a replacement ECU. I have my current SKC code and just need to get the code from the new one. I have the ECU connected to vehicle and Laptop is connected to OBD. I have read all info from my old ECU.
With the new ECU in vehicle and trying to read it the same way i did with the old ECU i cannot get in
No ECU response. (error=0x20F07)
|
|
|
|
|
Logged
|
|
|
|
doublerwest
Full Member
Karma: +5/-4
Offline
Posts: 178
|
|
« Reply #824 on: August 06, 2020, 05:46:59 PM »
|
|
|
No more clips or desoldering... here is my EEPROM programer tool. ME7_95040 is a console application that allows to program ME7 ecu's EEPROM. It has been tested successfully on ME7.1 and 7.5 ecus. Tool works with a dumb kline cable, either usb or serial. For usage instructions, in a command line window run 'me7_95040 --help', it will display the program options with some examples. Update 2011.11.23 - v1.30 -> /topic,1168.msg11101.html#msg11101 - Added read support over OBD port Update 2012.01.16 - v1.31 - Fix bug with 4Z7907551S ECU - Reduce CPU usage Update - v1.40 -> http://nefariousmotorsports.com/forum/index.php?topic=1168.msg21504#msg21504 - 95040, 95080, 95160 and 95P08 as well as more cpu options. - Allow to specify the chip select pin in case the search function can't find it I would like to report i had a 4b0906018da 0006 passat me7.5 ecu i got a p0601 code after leaving the ecu laying in a box after immo off adding vin# and flashing i put original 95040.bin back in it corrected it ...still working on the why but i have to many side projects just a report back with it worked for immo off and vin but ran into some user error or a bug or something i may have missed...im not sure if im supposed to post this file or not hrmm kinda edited my text to add my jackassery in but cant remove bin crud |
|
|
|
« Last Edit: August 06, 2020, 05:52:39 PM by doublerwest »
|
Logged
|
W357
|
|
|
|
