Pages: [1]
Author Topic: VAG ME7.5 chceck immo off please  (Read 4936 times)
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 47


« on: November 30, 2016, 02:58:10 PM »

Hello Everyone

I swaped 1.8T auq engine to VW golf mk2 and I try to turn off immo.
In attach is OEM immo on dump and my immo off dump.
Please check it is that immo is off ok, and the checksum is correctly because when I write immo off dump to ECU then I have P0601 error in ECU.

Thank's a lot.
Logged
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« Reply #1 on: November 30, 2016, 07:43:58 PM »

I think the checksum is not good.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #2 on: November 30, 2016, 08:56:27 PM »

Use this for immo off should be able to flash and start it no problem
http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=3319.0;attach=5504
Logged

Giving your mom a tuneup
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 47


« Reply #3 on: January 18, 2017, 12:31:57 PM »

Use this for immo off should be able to flash and start it no problem
http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=3319.0;attach=5504

Thank's a lot.
In your .bin VIN number is "XXXXX", if I write this in ECU, then VAG-COM will show VIN and ECU number correctly?
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #4 on: January 20, 2017, 07:48:33 AM »

Use this for immo off should be able to flash and start it no problem
http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=3319.0;attach=5504

Thanks Marty I had exact same problem Smiley Works on my new wideband ECU.... Smiley Smiley Smiley Grin
Logged

E85oholic
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)