Hi there

my short question before buying any equipment which came not 100% clear for me so far:

- does the NefMoto software work on all cars equipped with an ME7 ECU over OBD, including Alfa Romeo? The beginner guide has some working cars listed, but these are only VAG, whereas the rest of guides not definitely specifies on these
   though.
- in that case, would I only need the KKL cable?. That would be nice as I already do the normal OBD diagnostics with such a blue VAG KKL cable on the Alfas, which is not normally intended to work for Alfa at all.


Many thanks in advance for solving my last uncertainties and overall for the great forum and beginner guides!

Regards

Michael

only vag with some known bugs. me7.1.1, me7.5, and me7.1

Clear no.

Every manufacturer uses its own protocol or at least some custom implementations on it.

So no ME7 which is flashable on VAG must be flashable the same way on Alfa, or Daimler or Opel or anything.

Many thanks for your replies,

so there is nothing wrong about giving it a try as I have the blue cable already here.

I also assume it is the same for the ME7 logger? I could work but it rather does not. (although in this case there is already a post about a working Peugeot, giving hope)

However I will keep you updated on this for publics interest.


Greetings

Michael