Misfire behavior but no misfire

Pages: [1]

« previous next »

Author

Topic: Misfire behavior but no misfire (Read 5552 times)

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Misfire behavior but no misfire « on: February 25, 2017, 02:48:37 PM »

Hope someone can help.

On low load every thing is fine, but if i give it some load the engine start to shake just like misfiring, but no misfires are detected.

Log attached, if other variable are needed let me know.

thanks


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: Misfire behavior but no misfire « Reply #1 on: February 25, 2017, 05:53:06 PM »

you got knock that sticks out with the glance i had at it, but not enough to warrent engine shaking i think.(5 degree peak)
and it also looks like youre having problems following desired AFR (probable cause of knock?)


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: Misfire behavior but no misfire « Reply #2 on: February 25, 2017, 06:03:28 PM »

this is what im talking about with the AFR


	Logged

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6037

	Re: Misfire behavior but no misfire « Reply #3 on: February 26, 2017, 03:53:46 AM »

This is misfire. The lean spikes on WB are misfire events.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: Misfire behavior but no misfire « Reply #4 on: February 26, 2017, 04:52:25 AM »

Maybe a torn wastegate line?

I disabled ARMD and theres no shaking, but boost is out of control making my clutch slip.

will have to do a boost leak test, but it will have to wait a bit as my kit is with a friend...


	Logged

armageddon

Sr. Member

Karma: +20/-3
Offline

Offline

Posts: 348

	Re: Misfire behavior but no misfire « Reply #5 on: April 01, 2017, 08:22:05 AM »

To give a conclusion to this...

It was infact misfires,but for some odd reason ecu did not assume them, in past ocasions they appear in logs and vcds, but not this time.

I have some spare coils that I replace one at a time to find that was cylinder 1 coil that was bad.

clutch was sliping because it's already a little weak and as boost was increasing fast after misfire events, it sliped.

all good now.

thanks


	Logged

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6037

	Re: Misfire behavior but no misfire « Reply #6 on: April 02, 2017, 03:46:43 AM »

I told you Wink


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 12:55:59 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search