NefMoto > ECU Files > ECU Definition Files > Bugatti Veyron full definition file!!!! :) :) :) 5B0906012
Pages: [1]
« previous next »
Author Topic: Bugatti Veyron full definition file!!!! :) :) :) 5B0906012  (Read 10429 times)
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343
« on: February 26, 2017, 07:05:34 PM »
So I stumbled on this little gem, it looks to be a fully defined .bin for a Bugatti Veyron.

Anyone able to verify if this is what I think it is?

***EDIT: the file is legit!!!! Smiley I looked up the VMAX and it's 405 km/hr*** don't think there are many other cars that it could be Wink
« Last Edit: February 26, 2017, 07:22:48 PM by mister t » Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630
« Reply #1 on: February 26, 2017, 08:04:00 PM »
The .bin file looks suspiciously small?
Also the VMAX would be higher since the original top speed was higher than 405(407)
Not dismissing it completely, but it just looks a little off to me Smiley
Logged
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343
« Reply #2 on: February 27, 2017, 01:04:17 AM »
Quote from: KasperH on February 26, 2017, 08:04:00 PM
The .bin file looks suspiciously small?
Also the VMAX would be higher since the original top speed was higher than 405(407)
Not dismissing it completely, but it just looks a little off to me Smiley

.bin looks like an ME9 file though. Just because it's a Bugatti doesn't mean that it would have any more maps than any other car.

That said, how many cars are there out there which can top 400 km/hr?

As well, the Veyron was ordinarily limited to 400 km/hr unless you got out a second key which activated the top speed mode. This lowered the suspension and put the aero into a low drag configuration which would be reset if you hit the brakes. So the 400 KM/hr v-max found in this file actually matches the non-top speed run speed limiter.

The other reason I think it's legit is that it came straight from Bosch. The ori and map pack was made from a .HEX and an a2l. straight from a bunch of DAMOS files that appear to have been leaked directly from Bosch.
« Last Edit: February 27, 2017, 01:10:27 AM by mister t » Logged
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
« Reply #3 on: February 27, 2017, 08:12:38 AM »
Have i to rename the .bin file and then extract it?
Is it really 254kb ?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #4 on: February 27, 2017, 01:49:45 PM »
Its a weird file size.
There is obviously 2 ECU's in this car just like the W12 Bently only this is a 8.0 W16 which is indicated in the file.
The 2 ECU's are identical however, even the eeproms.
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #5 on: February 28, 2017, 09:47:19 AM »
I can't wait to see who on here first tunes a Veyron Cheesy Cheesy Cheesy
Logged
I have no logs because I have a boost gauge (makes things easier)
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #6 on: February 28, 2017, 10:22:49 AM »
I haven't looked inside, but most likely it's just the cal section.
And that said, this all is completely pointless.

Believe it or not but the ECU is not special just because something has more liters or more power.
Just take a look at some heavy duty machinery and trucks, that have more power than the Veyron. The ECU's are fairly simple, even when the engine is 30 liters.

Also, tuning an industrial ship loader to have sharper hydraulic response and wave around it's huge arm around faster is a whole new ballgame. Especially after you get out of it and watch it go at it...
You can also fit inside the DPF tube.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #7 on: February 28, 2017, 10:47:31 AM »
It's all this "oh loooooook, all these A2Ls, wooooooow, now we can t000n3 all those cars maaaaaaaaang" Cheesy Cheesy Cheesy Cheesy Cheesy Cheesy Cheesy
Logged
I have no logs because I have a boost gauge (makes things easier)
sebasapri
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 12
« Reply #8 on: March 01, 2017, 04:29:14 PM »
WTF !!! Who will have filtered this file? Huh

Surely this file will be of great help to me when a customer comes with this car to the workshop Tongue
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #9 on: March 07, 2017, 03:45:05 AM »
running those on a chassis dyno is more trivial than actually tuning them.
Logged
I have no logs because I have a boost gauge (makes things easier)
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343
« Reply #10 on: March 08, 2017, 10:46:08 PM »
Quote from: prj on February 28, 2017, 10:22:49 AM
I haven't looked inside, but most likely it's just the cal section.
And that said, this all is completely pointless.

Believe it or not but the ECU is not special just because something has more liters or more power.


Well, if exotic definition files are no big thing, would you care to post up any exotic definition files that you have?
Logged
mdccode5150
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 122
« Reply #11 on: November 12, 2017, 10:05:52 PM »
It has 4 ECU's and the File is massive 60H0g.s19 7,681 kb, and the definition file 12.5MB's
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 08:05:13 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)