Pages: [1]
Author Topic: Help finding NLLM map  (Read 9918 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: December 02, 2011, 04:16:34 PM »

What's up everyone  Wink

Again posting in this awesome forum with another problem Smiley So, I wanted to change my idle speed and with the help of audi tt ols file I've managed to locate address of NLLM in my file. Problem is - it isn't NLLM (tried changing values but without any effect). Maybe someone could help me out in locating it?

Address of NLLM that I thought I've found was @ 19D4C. Also 19D46 looked promising - but has no effect on idle speed when changed also. Tried to search for this map based on sequence 1200 - 800 rpm but still no luck. So please someone help me out with this, because this is driving me nuts...
Logged

TheDSI
Full Member
***

Karma: +12/-0
Offline Offline

Posts: 78


« Reply #1 on: December 02, 2011, 05:52:25 PM »

I think it 19DA2 ....
for more info refere to LLRNS fuction in the Funktionsrahmen
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #2 on: December 02, 2011, 06:02:24 PM »

Damn, that means my def.file is off. Maybe try these:

NFSM 19D69
NLLM 19D99
HuhHuhHuhHuh

I had asked for help on this a while ago;
http://nefariousmotorsports.com/forum/index.php/topic,1038.msg9326.html#msg9326

 and for your file it would have been:

NFSM 19D45
NLLM 19D4C

I assumed they were right, but didn't get to try it out. I guess they were wrong Huh Huh
 
« Last Edit: December 02, 2011, 06:14:04 PM by rob.mwpropane » Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
TheDSI
Full Member
***

Karma: +12/-0
Offline Offline

Posts: 78


« Reply #3 on: December 02, 2011, 06:42:15 PM »

I'm not shure, it seems there is more data here than in some damos I have ..
but I bet it's not far from those adresses .
edit-> maybe some log can help us to find this map .
« Last Edit: December 02, 2011, 06:45:39 PM by TheDSI » Logged
Giannis
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 176


« Reply #4 on: December 02, 2011, 11:25:33 PM »

please post original file is easier to find maps.
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #5 on: December 03, 2011, 01:52:44 AM »

here's original Smiley by the way last digit should be 800 (80*10coef) rpm so 50 in hex
« Last Edit: December 03, 2011, 01:57:46 AM by masterj » Logged

Giannis
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 176


« Reply #6 on: December 04, 2011, 06:41:24 AM »

Sorry mate i tried hard with no luck. You have a tricky file doesn't look like the others vag 1.8t 180ps that i have decreapted  Embarrassed
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #7 on: December 04, 2011, 11:56:53 AM »

Sorry mate i tried hard with no luck. You have a tricky file doesn't look like the others vag 1.8t 180ps that i have decreapted  Embarrassed

Yeah... thanks for trying though Smiley maybe someone with assembler skills could help me out finding this map
Logged

setzi62
Full Member
***

Karma: +142/-0
Offline Offline

Posts: 249


« Reply #8 on: December 06, 2011, 09:19:43 AM »

From the code, there is:
NLL2M at 19D4C, 6 x 1Byte, unsigned
  x-Axis: tmot, at 182B7 (common axis)

NFS2M at 19D45, 6 x 1Byte, unsigned
  x-Axis: tmot, at 182B7 (common axis)

there is also a map for idle speed depending on gear:
NLLMG at 19D63, 6 x 8Bytes, unsigned
  x-Axis: tmot, at 182B7 (common axis)
  y-Axis: gangllr, at 19DFE (common axis)

All maps containing rpm (nmot).
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #9 on: December 06, 2011, 09:46:06 AM »

From the code, there is:
NLL2M at 19D4C, 6 x 1Byte, unsigned
  x-Axis: tmot, at 182B7 (common axis)

NFS2M at 19D45, 6 x 1Byte, unsigned
  x-Axis: tmot, at 182B7 (common axis)

there is also a map for idle speed depending on gear:
NLLMG at 19D63, 6 x 8Bytes, unsigned
  x-Axis: tmot, at 182B7 (common axis)
  y-Axis: gangllr, at 19DFE (common axis)

All maps containing rpm (nmot).

Setzi62- you sir, are amazing! Thank you. I did mention those addresses up in my post^^^, but he said they didn't work? Thank you very much for your effort, as I have no disassembly skills... not like that anyway.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #10 on: December 06, 2011, 12:33:12 PM »

From the code, there is:
NLL2M at 19D4C, 6 x 1Byte, unsigned
  x-Axis: tmot, at 182B7 (common axis)

NFS2M at 19D45, 6 x 1Byte, unsigned
  x-Axis: tmot, at 182B7 (common axis)

there is also a map for idle speed depending on gear:
NLLMG at 19D63, 6 x 8Bytes, unsigned
  x-Axis: tmot, at 182B7 (common axis)
  y-Axis: gangllr, at 19DFE (common axis)

All maps containing rpm (nmot).

Thank you, setzi62! But I don't get it why my idle didn't change... Well, I guess I'll try again Smiley

PS.> What is the difference between NLLM and NLL2M? In some definition files I even see NLL2M_1_0 and NLL2M_2_0... So which one controls idle speed when car isn't in any gear? Smiley
« Last Edit: December 06, 2011, 12:39:41 PM by masterj » Logged

rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #11 on: December 06, 2011, 01:47:53 PM »

Two questions then:

A. --What is the factor/offset/precision for "y-Axis: gangllr, at 19DFE (common axis)"?

B. --What is the map name at 19D93 as it has the same look in 2D, and I assume same x and y axis as NLLMG at 19D63?

I'm sorry for the questions, but I have not seen a damos with these maps in them, and find this section of the bin.file confusing to say the least Embarrassed

Edit: I believe the factor is 1, precision of 2...so that's my first question down...
« Last Edit: December 06, 2011, 02:27:17 PM by rob.mwpropane » Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #12 on: December 06, 2011, 03:56:17 PM »

Two questions then:

A. --What is the factor/offset/precision for "y-Axis: gangllr, at 19DFE (common axis)"?

B. --What is the map name at 19D93 as it has the same look in 2D, and I assume same x and y axis as NLLMG at 19D63?

I'm sorry for the questions, but I have not seen a damos with these maps in them, and find this section of the bin.file confusing to say the least Embarrassed

Edit: I believe the factor is 1, precision of 2...so that's my first question down...

Factor is 1 and precision is 0 Smiley It is gear number 0-1-2-3-4-5-6-7
Logged

setzi62
Full Member
***

Karma: +142/-0
Offline Offline

Posts: 249


« Reply #13 on: December 07, 2011, 01:22:15 AM »

I think NLL2M_1_0 and NLL2M_2_0 are variants of NLL2M map, one of them gets
selected depending on used coding. You find such map variants often depending on
coded gearbox or transmission type (2WD/4WD).

In the FR, the section LLRNS describes the used maps. In this ECU here the
original NLLM is now NLLMG (expanded to have different curves depending on gangllr).
The map NLL2M will be used mainly when compressor of air condition is on, else the normal
map NLLMG is used.
If you change the row for gangllr=0 in NLLMG, this should change your idle speed
(in the ori file I see: 1200, 1020, 920, 840, 800, 800 for gangllr=0).

The map at 19D93 is NLLMGFS, which is same map type with same axes as NLLMG.
NLLMGFS is for automatic transmission cars with selected gear.
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #14 on: December 07, 2011, 05:01:23 AM »

I think NLL2M_1_0 and NLL2M_2_0 are variants of NLL2M map, one of them gets
selected depending on used coding. You find such map variants often depending on
coded gearbox or transmission type (2WD/4WD).

In the FR, the section LLRNS describes the used maps. In this ECU here the
original NLLM is now NLLMG (expanded to have different curves depending on gangllr).
The map NLL2M will be used mainly when compressor of air condition is on, else the normal
map NLLMG is used.
If you change the row for gangllr=0 in NLLMG, this should change your idle speed
(in the ori file I see: 1200, 1020, 920, 840, 800, 800 for gangllr=0).

The map at 19D93 is NLLMGFS, which is same map type with same axes as NLLMG.
NLLMGFS is for automatic transmission cars with selected gear.


Many thanks setzi62!! Thanks for taking time to explain this!!
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)