Pages: [1]
Author Topic: How to mod golf 4 "020" can cluster to understand analog rpm signal  (Read 3417 times)
janne
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 50



Hi.
I try to find it but no succes.
I put standalone ecu in golf 4 agu.
I see that there is rpm signal wire between ecu and cluster.
Ecu sends 10-12v 50% pwm analog signal.
But cluster wont use it...
I think it communicate via w bus or k line?
I think older 919 use anolog signal.
Is there any way to mod my 920 cluster to read that "normal" rpm signal?
Logged
Scheitan
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


« Reply #1 on: June 17, 2017, 01:49:32 AM »

Adress
0x065 -> value 81 from gearbox
            -> value 80 from abs over can



Logged
janne
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 50


« Reply #2 on: June 19, 2017, 01:14:15 PM »

I mean rpm signal engine speed not vehicle speed
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)