Pages: 1 ... 4 5 [6] 7 8
Author Topic: Open Source NefMoto ME7 ECU Flasher and Data Logger  (Read 245173 times)
bennyboi
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 33


« Reply #75 on: October 21, 2019, 01:02:58 PM »

Is there anyway to get this to work with Openport2.0?
Logged
d3irb
Full Member
***

Karma: +134/-1
Offline Offline

Posts: 195


« Reply #76 on: October 21, 2019, 02:14:35 PM »

Is there anyway to get this to work with Openport2.0?

Sure, it's open source.

In its current form, no. It's hard-coded to use FTD2XX and the FTDI driver DLLs. OpenPort 2.0 is J2534.
Logged
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #77 on: October 26, 2019, 07:37:05 AM »

Hi!

What could be a problem with my car if I cannot read the flash with max baudrate? Only the lowest speed is working. With other baudrates it fails around 15%. I havent tried the write because of the reading issues.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12276


WWW
« Reply #78 on: October 26, 2019, 08:56:17 AM »

Hi!

What could be a problem with my car if I cannot read the flash with max baudrate? Only the lowest speed is working. With other baudrates it fails around 15%. I havent tried the write because of the reading issues.

You may need a dedicated k-line or pull the cluster fuse. Also try bench reading it if you dont have immo.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #79 on: January 07, 2020, 09:27:40 AM »

Im getting a weird problem with reflashing on Write Full vs Diff Write on ME7.1.1 B6S4. IT seems when i do full write it doesnt close out the ECU correctly or something after the reflash is done isnt the same as Diff write. For instance i can do a full flash. "no-start condition" then i diff write the same rom OBD mode nothing different. it says YUP its all the same, closes out and poof car starts again.

Do you guys still make updates to this application or should i just know that DIFF write is what i want to use? If you need logs i can get them if not just at least mention this in the software release notes?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12276


WWW
« Reply #80 on: January 07, 2020, 10:36:55 AM »

Im getting a weird problem with reflashing on Write Full vs Diff Write on ME7.1.1 B6S4. IT seems when i do full write it doesnt close out the ECU correctly or something after the reflash is done isnt the same as Diff write. For instance i can do a full flash. "no-start condition" then i diff write the same rom OBD mode nothing different. it says YUP its all the same, closes out and poof car starts again.

Do you guys still make updates to this application or should i just know that DIFF write is what i want to use? If you need logs i can get them if not just at least mention this in the software release notes?

I believe this is a known issue with st10 flashing, which isn't 100% supported. I don't know that there is an issue for it that is logged in github.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #81 on: January 07, 2020, 01:45:25 PM »

I believe this is a known issue with st10 flashing, which isn't 100% supported. I don't know that there is an issue for it that is logged in github.

Program works great otherwise. If logging could be fixed with the right security key like the melogger program and that full write... it would be mint. But i spent countless hours getting visual logger to work finally so, meh.

If you need logs to put something in github let me know. I know now so im happy...
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12276


WWW
« Reply #82 on: January 07, 2020, 02:32:35 PM »

Program works great otherwise. If logging could be fixed with the right security key like the melogger program and that full write... it would be mint. But i spent countless hours getting visual logger to work finally so, meh.

If you need logs to put something in github let me know. I know now so im happy...

No, i don't, i need someone to submit pull requests Smiley

Or open an issue anyway.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #83 on: January 08, 2020, 11:04:26 AM »

No, i don't, i need someone to submit pull requests Smiley

Or open an issue anyway.

Had a more odd outcome on another B6S4 today. I would diff write. it wouldnt start, i would diff write the same file (checked 19 sections with no changes) closed the ecu out and then boom it starts. Weird. Mine doesnt do that. Same ECU same revision code on it.
Logged
hunter3899
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #84 on: September 20, 2020, 08:53:07 PM »

Possible support for MED9.1 down the line?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12276


WWW
« Reply #85 on: September 20, 2020, 09:04:37 PM »

Possible support for MED9.1 down the line?

Unfortunately, no, very different.

Would be a ton of work and likely totally different app
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
DT
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 184


« Reply #86 on: October 30, 2020, 01:36:59 PM »

In the past I used EEPROM driver code with MiniMon in boot mode to read/write the EEPROM. The NefMoto software supports reading and writing the EEPROM, but I haven't hooked it up to the user interface for people to use yet.
Quote from me7_95040 eeprom thread.

@nyet, can this code be found and enabled in this open source version?
« Last Edit: October 30, 2020, 01:38:36 PM by DT » Logged

nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12276


WWW
« Reply #87 on: October 30, 2020, 03:39:08 PM »

Quote from me7_95040 eeprom thread.

@nyet, can this code be found and enabled in this open source version?

Yes, it is possible, but requires somebody to go do it.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
arazvan2002
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #88 on: December 19, 2020, 12:46:07 PM »

This software can be used with a generic KKL cable (don't know at this moment which FTDI chip has) or with a Galleto 1260 to flash EDC15P? It has same flash chip as ME7, 29F400BB  and cpu Infineon C167, but I don't know if it uses same communication protocol. My MPPS cable is lent to someone and I don't trust anything else to flash EDC15P, like Galleto 54, or 1260, or Kess.
Thanks.
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #89 on: February 17, 2021, 11:29:31 PM »

Only me7 it wont flash edc15
Logged
Pages: 1 ... 4 5 [6] 7 8
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.049 seconds with 16 queries. (Pretty URLs adds 0.006s, 0q)