Pages: 1 [2]
Author Topic: LAMFA and Component Protection  (Read 9589 times)
ivan
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 63


« Reply #15 on: October 18, 2017, 02:39:20 PM »

thankss i will try to find it!
Logged
ivan
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 63


« Reply #16 on: October 18, 2017, 03:47:11 PM »

i found it! thanks im going to study it!
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #17 on: October 18, 2017, 05:53:42 PM »

plz see the TT 240Hp file
this file used BTS and ATR  Wink

But those engines have real EGT sensors. Then EGTs are way more precise than calculated ones.
Logged
4ringpieces
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 232


« Reply #18 on: October 19, 2017, 12:17:34 AM »

Bam has real egt sensor too
Logged
ivan
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 63


« Reply #19 on: October 19, 2017, 12:49:20 AM »

does someone have a damos for TT 240 file? it will be easier to find maps on winols.

I think Bam use bts too but only while 40ºc between 820 and 860ºc when atr entry am i right?

thank you!
Logged
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« Reply #20 on: October 19, 2017, 04:21:51 AM »

Am i correct in saying that LAMFA is active till 820c at which point KFLBTS becomes active till 860c at which point KFDLBTS become active?
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #21 on: October 19, 2017, 04:40:18 AM »

Richest wins.  LAMFA is always active.
Logged
4ringpieces
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 232


« Reply #22 on: October 19, 2017, 04:49:05 AM »

There's no damos for the 240 file and you don't need it.

Once over the threshold kflbts will engage, then it's a game of lowest wins
Logged
ivan
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 63


« Reply #23 on: October 19, 2017, 09:05:49 AM »

heheh ok thankss, i will look for maps step to step
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)