Pages: 1 [2]
Author Topic: med9.1 pop&bangs  (Read 15835 times)
bzyk77
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 7


« Reply #15 on: November 02, 2018, 05:54:41 AM »

I need some little help to find CWSAWE.

I suppose $1C583F - $1C5844, but i`m not sure.


MED 9.1 8P0907115H_0261S02342_1037387473



CWSAWE is 1C5808
Logged
Bitshifter
Full Member
***

Karma: +10/-7
Offline Offline

Posts: 94


« Reply #16 on: November 03, 2018, 03:50:23 PM »

CWSAWE is 1C5808

Testet and confirmed, thanks a lot.

@ all: remember that EGT rise during rmp drop  Undecided
Logged
msundercober
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 46


« Reply #17 on: November 09, 2018, 01:24:21 AM »

You donĀ“t need to touch "CWSAWE" on med9.
Logged
Bitshifter
Full Member
***

Karma: +10/-7
Offline Offline

Posts: 94


« Reply #18 on: November 09, 2018, 10:29:08 AM »

Without touching CWSAWE it don`t work in my file.

What do you edit?
Logged
NBR
Full Member
***

Karma: +20/-7
Offline Offline

Posts: 79


« Reply #19 on: November 09, 2018, 12:38:42 PM »

You only don't need CWSAWE if you edit KFNWEGM to disable fuel cut. If you want fuel cut delay using KFTVSA maps while the clutch is not pressed then you need CWSAWE
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 282


« Reply #20 on: November 10, 2018, 11:43:59 AM »

KFNWEGM not good way
Logged
tuningfreak
Newbie
*

Karma: +9/-5
Offline Offline

Posts: 18


« Reply #21 on: February 11, 2019, 03:30:15 AM »

KFNWEGM not good way


So you can tell us the good way
Logged
patrick_wv
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #22 on: January 10, 2021, 12:05:34 PM »

Hello.

Could someone confirm if CWSAWE is at 1C5A54 in my Bin?
And if KFTVSA is at 1C5A69?

From comparing to another bin it seems like KFTVSA is at 1C5A69. But im unsure if CWSAWE is at 1C5A54.

Im finding my maps by using a (nearly?)-fully defined mappack for another Software Version of the MED9.1 . Most maps match with my file with a global -4 Offset on the mappack. But the map definitions for the overrun stuff doesnt seem to fit. After moving KFTVSA +4 bytes the content seems to be looking right but im unsure on how i validate CWSAWE. KFTVSA is a map which i can check against a file with fully defined mappack. But CWSAWE is only a 1 byte value. There are many 1 byte values with 00 as content..

Thanks in advance!
« Last Edit: January 11, 2021, 02:56:45 AM by patrick_wv » Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.032 seconds with 17 queries. (Pretty URLs adds 0s, 0q)