jnoroeste
Newbie
Karma: +0/-0
 Offline
Posts: 1
|
 |
« Reply #1 on: January 03, 2018, 07:16:38 PM »
|
|
|
Hi M8,
I have been reading your post about eec-v,
I asume you have readed correctly the file, but when tried to flash, first erase ecu and when must started to flash showed you comunication lost, try to recover, etc etc.
Your ecu is now with blank flash, There is no way to recover by obd port, seems have been some kind of bootloader file into the flash, ecu is not able to start, no diag, no flash, nothing seems work.
I had this exactly same issue in Fiesta st150cv ecu, there are two ways to recover,
First and most simple, just swap eeprom to a "new" used ecu , second option is desolder flash and program with eeprom programmer using the full read you got from the beggining.
Regards.
|
|
|
|
|
Logged
|
|
