Help replacing with new ECM in my 2012 VW CC

Pages: [1]

« previous next »

Author

Topic: Help replacing with new ECM in my 2012 VW CC (Read 6193 times)

dingerdang

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Help replacing with new ECM in my 2012 VW CC « on: December 25, 2017, 02:10:45 PM »

Hello,

I am trying to replace faulty ECM in my 2012 VW CC, with a new OEM ECM. As per Ross-Tech wiki Ref:http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_ECU_Swapping, I need to retrieve PIN of the car in order to integrate my new ECM.

I got the original latest Vagtacho and ran it with my car, it shows me the following but, didn't quiet help in retrieving the PIN:

Connecting VDO V1&V2 MY2009-2011 CAN bus UDS protocol...
Connected!
Access Granted!
Trying to Read Immobilizer PIN code...
PIN code: 00000
Part: 3C8920970Q
ASAM: EV-Kombi_USD_VDD_RM09
FAZIT: VD1-04803.02.11273
VIN: XXXXXXXXXXXXXX
SW: 0420
Date: 03.02.2011

Could anyone suggest me how I could find out the PIN/ integrating my new ECM into the car?

Thanks a ton!


	Logged

omarino

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #1 on: December 28, 2017, 02:12:50 PM »

Hi
What type you ECU is??

Envoyé de mon iPhone en utilisant Tapatalk


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #2 on: December 28, 2017, 03:16:08 PM »

Quote from: omarino on December 28, 2017, 02:12:50 PM

Hi
What type you ECU is??

Envoyé de mon iPhone en utilisant Tapatalk

That car should have MED17.5.2 if 2.0T.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

prj

Hero Member

Karma: +1067/-476
Offline

Offline

Posts: 6004

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #3 on: December 29, 2017, 02:42:05 PM »

Pretty sure it's not immo 3 either.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

dingerdang

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #4 on: December 29, 2017, 03:57:22 PM »

Quote from: omarino on December 28, 2017, 02:12:50 PM

Hi
What type you ECU is??

Envoyé de mon iPhone en utilisant Tapatalk

Its a Bosch, 06J 907 309 B model ECU
Went to VW dealership yesterday and got it replaced with OEM 06J906027FD model ECU. I should have asked them for the PIN/SKC Sad


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #5 on: December 29, 2017, 03:58:17 PM »

Quote from: dingerdang on December 29, 2017, 03:57:22 PM

Its a Bosch, 06J 907 309 B model ECU
Went to VW dealership yesterday and got it replaced with OEM 06J906027FD model ECU. I should have asked them for the PIN/SKC Sad

What did that cost you?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

gman86

Hero Member

Karma: +45/-128
Offline

Offline

Posts: 705

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #6 on: December 29, 2017, 04:21:53 PM »

Quote from: dingerdang on December 29, 2017, 03:57:22 PM

Its a Bosch, 06J 907 309 B model ECU
Went to VW dealership yesterday and got it replaced with OEM 06J906027FD model ECU. I should have asked them for the PIN/SKC Sad

Most virgin modules will adapt to the car


	Logged

dingerdang

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #7 on: December 29, 2017, 06:36:18 PM »

Quote from: vwaudiguy on December 29, 2017, 03:58:17 PM

What did that cost you?

Gave me a quote of $250


	Logged

prj

Hero Member

Karma: +1067/-476
Offline

Offline

Posts: 6004

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #8 on: December 30, 2017, 04:36:14 AM »

They will not give you PIN because they can't see it. Itis done online through geko for a very long time now.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

H2Deetoo

Sr. Member

Karma: +26/-1
Offline

Offline

Posts: 257

	Re: Help replacing with new ECM in my 2012 VW CC « Reply #9 on: December 31, 2017, 07:49:54 AM »

The part 3C8920970Q which you tried to access is the cluster, but for Passat (CC) the cluster doesn't hold the immobilizer.
Instead the immobilizer can be found in the comfort (CCM) module, which is located behind the glove box.

If you still want to have your pin (not sure what you expect to be able do with it) then you need to read the 95320 eeprom from the comfort module. Most big tools can decode it; you can also attach here and PM me for decoding

Regards,
H2Deetoo


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 10, 2024, 02:23:32 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search