Flash fails

Pages: 1 [2]

« previous next »

Author

Topic: Flash fails (Read 16015 times)

Tony@NefMoto

Administrator
Hero Member

Karma: +132/-4
Offline

Offline

Posts: 1389

2001.5 Audi S4 Stage 3

	Re: Flash fails « Reply #15 on: February 13, 2012, 02:50:36 PM »

Quote from: rotor_powerd on February 13, 2012, 02:48:55 PM

Ok - but it doesn't matter what is currently on the chip, I'll still be able to flash over it? Thanks again

Yes.


	Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto

rotor_powerd

Newbie

Karma: +3/-0
Offline

Offline

Posts: 16

	Re: Flash fails « Reply #16 on: February 19, 2012, 04:37:10 PM »

Ok, finally pulled the ECU. The ECU has been socketed, and the chip that it is there has a paper tag on the top with some handwriting on it. I still can't flash over the tune that's in there, but I can read the file perfectly fine. What's the easiest way to get around this at this point?


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: Flash fails « Reply #17 on: February 19, 2012, 05:36:16 PM »

Obviously the ECU got chipped with aftermaket rom. It is probably not writable but I might be wrong. Any chance you can get socket version of whatever eprom chip you are supposed to be in there and just plug it in and then flash it?

AFAIK you can remove and plug new eprom in after the ECU boots itself up and the flash the new virgin chip via obd.


	Logged

rotor_powerd

Newbie

Karma: +3/-0
Offline

Offline

Posts: 16

	Re: Flash fails « Reply #18 on: February 19, 2012, 06:38:39 PM »

Yeah I was wondering if I could just source a stock/blank chip to pop in and flash.


	Logged

rotor_powerd

Newbie

Karma: +3/-0
Offline

Offline

Posts: 16

	Re: Flash fails « Reply #19 on: February 20, 2012, 10:04:14 AM »

http://www.ebay.com/itm/AM29F800BB-29F800-29F800BB-Flash-PSOP44-SOP44-/260937494878?pt=LH_DefaultDomain_0&hash=item3cc116315e

If I buy this, then pop it in the socket, I should be good to go to flash it, correct?


	Logged

arsrs4

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: Flash fails « Reply #20 on: April 04, 2018, 05:33:15 PM »

Hello! I have the same problem. It fails at the same stage pf writing. I opened the ecu up, but didnt find any aftermarket chips. I have a 2001 S4 with m box. What could this be?


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 12:41:55 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search