There are ME7.1 Schematics somewhere on the forum.
The schematics show that divider if you follow A_HFM or how the input was called.

The schematics show always all options so they sometimes look like a short circuit.
There are Top and Bottom silkscreens too in the ME71.zip so you can see which R is where.

There is a parts list for every ecu number which decides which parts are then populated or not, so the base circuit board is quite versatile,
However there are not may partslists out i guess...

In German you call them Stückliste.


Hello .first of all thanks for the great info. i do have few questions however.
Top and Bottom silkscreens are for the NA 6 cyl  or for the 6cyl T version? ex:8e0909552 6 cyl NA or 8d0907551 6 cyl turbo?
Also,in stuckliste in excel , 286:3 , 345:02 v6t and 344:02 v6s. the v6t is the turbo version and the v6s is the NA?

Regards!

Capacitor 

In smd they are mostly white or grey.
And they are next to the ECU pins because this is a way of doing it right in terms of noise filtering.