Pages: [1]
Author Topic: Cloning ME7 with virgin 95040 ?  (Read 2567 times)
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« on: June 01, 2018, 06:10:11 AM »

Hey,

all this EEPROM-stuff is quite new for me, but I reat alot and try to unterstand..

My goal is to clone a (MY2000) 8N0906018Q ECU on a 4B0906018F hardware.
My problem on this:
a the moment, I cannot read the dump of the 8N0906018Q ECU because carĀ“s not awailible yet.

Is it possible to use one of the virgian 95040 to clone the ECU and re-learn it in the car?
Witch of the posted virgians I need for this ?

Or is it enough to flash 8N0906018Q SW in the ECU and deleat the IMMO of the original 4B0906018F EEPROM to run the cloned ECU in the car ?

Thanks for help, hints etc.

Jochen
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #1 on: June 01, 2018, 07:07:07 AM »

You can't do anything until the car has arrived anyway - so why not wait and do it properly?
Logged
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #2 on: June 01, 2018, 07:15:25 AM »

you can prepaire a ECU meanwhile.. (hopefully)  Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)