NefMoto > Technical > Tuning > dnmaxh or equivalent m3.8.3/m5.92?
Pages: [1]
« previous next »
Author Topic: dnmaxh or equivalent m3.8.3/m5.92?  (Read 3243 times)
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« on: June 17, 2018, 03:47:58 AM »
can not find anything in available ols files. not saying much considering the standard limiter is not defined either.

and no funktion pdf. (i would buy pdf if anyone has).
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Online Online

Posts: 2802
« Reply #1 on: June 17, 2018, 05:31:01 AM »
2 step is life
Logged
Giving your mom a tuneup
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826
« Reply #2 on: June 17, 2018, 06:36:35 PM »
Quote from: k0mpresd on June 17, 2018, 03:47:58 AM
can not find anything in available ols files. not saying much considering the standard limiter is not defined either.
and no funktion pdf. (i would buy pdf if anyone has).

It should be included in BBNMAX: A 16. 20  Drehzahlbegrenzung function. That is one the most elusive functions in the M38x/M59x ECUs. The big problem is find a funktionsrahmen for it. DNMAXH should be inside the called speed limiter "vector or matrix" for those ECUs. NMAXZP  maybe could be similar to DNMAXH.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #3 on: June 18, 2018, 01:18:58 AM »
Quote from: eliotroyano on June 17, 2018, 06:36:35 PM
It should be included in BBNMAX: A 16. 20  Drehzahlbegrenzung function. That is one the most elusive functions in the M38x/M59x ECUs. The big problem is find a funktionsrahmen for it. DNMAXH should be inside the called speed limiter "vector or matrix" for those ECUs. NMAXZP  maybe could be similar to DNMAXH.

regards, i think you are correct. i do not see this nmaxzp (Speed hysteresis for speed limitation) defined in the several m38x and m59x ols files i have. i do, however, have  a .dam with this map defined. i have ordered the corresponding ecu so i can dump the firmware.
Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826
« Reply #4 on: June 18, 2018, 08:37:17 AM »
Quote from: k0mpresd on June 18, 2018, 01:18:58 AM
regards, i think you are correct. i do not see this nmaxzp (Speed hysteresis for speed limitation) defined in the several m38x and m59x ols files i have. i do, however, have  a .dam with this map defined. i have ordered the corresponding ecu so i can dump the firmware.

Maybe this spreadsheet can help you. I have done many time ago trying to understand the speed limiter function and locations. Of course the proper way should be disassemble firmware but that was a start point at that time.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 05:41:39 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)