Pages: 1 [2]
Author Topic: Vw Golf Med9 problem when try to boost over 1.55 bar  (Read 15737 times)
IamwhoIam
Hero Member
*****

Karma: +106/-3019
Offline Offline

Posts: 1108


« Reply #15 on: September 01, 2018, 04:44:57 AM »

but as i target 2 bar

You are targetting WHAT? Please provide some datalogs of this
Logged

I have no logs because I have a boost gauge (makes things easier)
scobbydoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #16 on: May 03, 2021, 08:53:11 PM »

Hi Guy, from the topic i have the similar issue.
My N75, Wastegate and BOV all replaced. Previous my boost is uncontrollable and hit 2bar and power cut.
After fixing it now is target at 1.8bar but it will still cut.
ECU is tune and tuner mention is my HW issue. Since i already replace the part. I not sure where else to find.
Logged
scobbydoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #17 on: May 03, 2021, 08:57:08 PM »

By the way i'm using MED9.1
Logged
scobbydoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #18 on: May 03, 2021, 09:33:23 PM »

Hi Guy, from the topic i have the similar issue.
My N75, Wastegate and BOV all replaced. Previous my boost is uncontrollable and hit 2bar and power cut.
After fixing it now is target at 1.8bar but it will still cut.
ECU is tune and tuner mention is my HW issue. Since i already replace the part. I not sure where else to find.

Logged
aef
Hero Member
*****

Karma: +77/-55
Offline Offline

Posts: 1682


« Reply #19 on: May 04, 2021, 03:03:17 AM »

your lpfp is dropping, thats all you can see from the log

there is no n75 duty in the log
Logged
scobbydoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #20 on: May 04, 2021, 08:35:38 PM »

Changed my LPFP.. Now holding at 5bar at WOT. We might found out the issue.
High chance is DSG limiting the Torque request.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 14 queries. (Pretty URLs adds 0.001s, 0q)