Pages: [1] 2
Author Topic: Hybrid Turbo Conversions  (Read 118001 times)
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« on: February 02, 2012, 03:12:19 AM »

If you're interested in upgrading a turbo, whether it be a good working order one or knackered used one I can offer a complete rebuild and hybrid service, All machining, porting, rebuild and balance work is carried on the turbos. I can make a hybrid to suit you and at a sensible price.

An example of my work.

K04 Hybrid turbo for the Audi S3/TT

Started as a K04-022
210bhp

Modifications

Machined exhaust housing to accommodate the larger RS6 turbine
Fully ported Wastegate to decrease boost creep
Machined K04 compressor housing to accommodate larger 2283 RS6 Billett compressor wheel
Rebuilt using complete rebuild kit
Fully 2 plain balanced with in 3 time OE specs
Upgraded T rear oil seal for high boost applications

potential with supporting Mods 340Bhp
Suggested 300-320bhp



« Last Edit: March 17, 2012, 04:00:03 AM by littco » Logged
ejg3855
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 118


« Reply #1 on: February 04, 2012, 10:19:12 PM »

US or UK based?
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #2 on: February 05, 2012, 05:57:47 AM »

Uk...
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136


« Reply #3 on: February 06, 2012, 03:56:17 AM »

location
and price fella
Logged
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #4 on: February 21, 2012, 08:54:55 PM »

Seems like the RS6 2283 wheel is the same as the Mazdaspeed 2283 wheel? At least, it looks just like it to me.
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #5 on: February 24, 2012, 06:32:24 AM »

Im pretty sure it is the same wheel. It's also in the Vauxhall VRX as well

I can offer pretty much any hybrid combination you desire. You are only limited by how much the housings can be machined to accept the larger wheels.
Logged
ejg3855
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 118


« Reply #6 on: March 06, 2012, 10:45:39 AM »

how does this example vary from say a Franken Turbo F23 ?
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #7 on: March 08, 2012, 02:38:05 PM »

Main difference is that this has billet 2283 compressor where as the f23 doesn't . Also the f23 has a larger wategate and is ceramic coated.
Logged
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #8 on: March 14, 2012, 07:38:43 PM »

With the right mods you can make 300whp on this wheel combo for sure!  Wink
Logged
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536


« Reply #9 on: March 16, 2012, 04:30:30 PM »

What does that example turbo run?
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #10 on: March 17, 2012, 03:59:28 AM »

The one shown above us running 310bhp on an s3 with large fmic, tubular manifold and 3" downpipe. Same setup has run over 330bhp.
Logged
ejg3855
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 118


« Reply #11 on: March 19, 2012, 05:37:39 AM »

Cost Shipped to the US?
Logged
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536


« Reply #12 on: March 19, 2012, 03:04:10 PM »

Yeah, I meant run cost-wise. What do you sell them for?
Logged
pedrosousa
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 75


« Reply #13 on: July 05, 2012, 04:01:34 AM »

littco, are you a ASN user?
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #14 on: July 05, 2012, 04:09:12 AM »

Yes;-)
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)