Pages: [1]
Author Topic: ME7 ECU Flasher not detecting my cable...I think...?  (Read 6237 times)
e_pacman
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 38


« on: February 08, 2012, 08:13:55 AM »

I am having some trouble getting my VAG-COM cable to work with the Nefmoto Software. The cable is supposed to be of the generic FTDI kind. The software that the cable came with is working fine, and I can use it to read DTCs in my car, but the Nefmoto SW seems to not detect the cable at all. I get nothing at all, not even an error message. Any ideas?
Logged
e_pacman
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 38


« Reply #1 on: February 08, 2012, 10:24:58 AM »

Never mind, it turns out I had forgotten to install the CDM driver. Now my device shows up in the drop down menu, so I guess everything is good then.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)