Pages: [1]
Author Topic: WTB Ross-Tech Vcds cable  (Read 13307 times)
Jr. Member

Karma: +0/-0
Offline Offline

Posts: 41

« on: December 09, 2018, 03:02:59 AM »

Hi, I wanted to see if anyone has a vcsd cable they want to sell

Karma: +0/-0
Offline Offline

Posts: 4

« Reply #1 on: May 17, 2021, 07:09:16 PM »

check out the new vagcom pro 5.5.1, it's cheaper and works better. VCP6 is what they'er calling it
Full Member

Karma: +7/-2
Offline Offline

Posts: 119

« Reply #2 on: August 24, 2021, 08:42:51 AM »

You mean Vag Can Pro.
"works better" Cheesy
Much much much more annoying to use as a diag tool. Of course it can do more things than VCDS, but general usability is horrible.
For what VCDS can do, there is no better tool IMO. It's not really expensive either.
It all depends what do you need it for.
If you need to update control units, then VCP might be your choice, just keep in mind that it is SLOW.
BCM update for Golf 6 took almost 2 hours.
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)