Im having issues with a 5120 hacked me7.1.1 551R cutting throttle.  3 bar MAP.  Its consistently cutting around 4850 rpms, 180 g/s, 13 to 14 psi.  Actual boost is less than requested.  Configuring the turbos, the wastegates are running a static 30% WGDC.  MAF is rescaled in MLHFM and MLOFS. mshfm matches msdk closely.  Car is running a modified gearbox with longer gears.  One log is a pull in third, one in second. 

The me7logger isnt adjusted for the 5120 so all pressure variables are half what they are.

Doubled KFDLULS and did not have any change.  Where do i go next?  ESP?  Edit the gearing in the ecu to reflect actual gearing? 

I feel like the high end load request is reasonable for the target and hardware.  I had left this stock while we were running configuration and had CWMDAPP set to 08 for the purpose of configuring the PID.  CWMDAPP is Codeword For Configuration Without Torque Structure.  I only edited the load request when I ran into the throttle cut issues.

Not sure if it is relevant, but ps_w seems pretty far off.

That said, I can't figure out why you would be seeing throttle cut :/