Pages: 1 [2]
Author Topic: Dimx and drl understand  (Read 8197 times)
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #15 on: February 11, 2019, 11:15:02 AM »


2) you should learn how PIDs work
i readed about PID but i dont find anything about LDR! What ldr means and where i can read and learn about what this is ! Thank you
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #16 on: February 11, 2019, 11:17:07 AM »

LDRPID is the boost pid (big fucking surprise) in ME

req boost is the set point, actual boost is the process variable.

I don't understand what you are asking.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #17 on: February 11, 2019, 11:12:24 PM »

Hi ,in my way to learn about pid and how it works ,i started to read and leanr from wiki, but i dont find anything to learn about ldr ! What ldr is and how it works ,if someone can explain me or give me a link from where i can read ! Thank you in advance !
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #18 on: February 11, 2019, 11:49:54 PM »

Why did you start another topic?

LDR = ladedruck regulation (boost pressure regulation).

LDRPID is... drumroll... the LDR PID.

What do you want to know?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #19 on: February 12, 2019, 04:34:08 AM »

Why did you start another topic?

LDR = ladedruck regulation (boost pressure regulation).

LDRPID is... drumroll... the LDR PID.

What do you want to know?
first thank you very much ,i didnt know what LDR is ! about the pid i readed ,but i didnt know the ldr is (=boost pressure regulation ) ,so lde is boost pressure error ! Now everything  make sense !
Logged
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #20 on: February 12, 2019, 06:00:11 AM »

And correct me if i’m wrong please ,kfldimx is an wgdc gap,this is the maximum wgdc allowed ?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #21 on: February 12, 2019, 09:58:13 AM »

No, it that is the I limiter to prevent integrator windup.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #22 on: February 12, 2019, 11:12:00 AM »

Not an exact gap of n75 ,but if i will write kfldimx with 50 all values ,my wgdc before  lin will not exceed this value ,right ?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #23 on: February 12, 2019, 11:14:45 AM »

No. For the third time, it is the I limiter. There are still two other components, AND there is the I limiter adaptation.

Please study PIDs again.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #24 on: February 13, 2019, 07:28:49 AM »

No. For the third time, it is the I limiter. There are still two other components, AND there is the I limiter adaptation.

Please study PIDs again.
so ,if i write kfldimx 90 all values ,in that area the I limiter wil be used max 90%
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)