Pages: [1]
Author Topic: Audi A6 2.7T BES  (Read 763 times)
rpd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« on: January 08, 2019, 06:59:35 PM »

Hi!
I just getting started to modify the maps and I have trouble with my BIN which I read from my ECU. I would like to switch off the Secondary Air Injetion System (SAI), because it's very noise and my pump in on the finish of life. So the problem is that, when I'm checking the original BIN in ME7Check in the end program shows 1 error: "RSA signature failure found -> Found 1 error!!!". I don't know why...what's the problem?

Second question. I compare my "oryginal" BIN to the BIN of the same ECU (file with BIN of this ecu is in folder from ME7Sum) and there are a lot of differences between them. Is it possible that I have a modified engine map for higher power?
Logged
nyet
Administrator
Hero Member
*****

Karma: +442/-62
Offline Offline

Posts: 10099


WWW
« Reply #1 on: January 08, 2019, 11:57:05 PM »

Any particular reason you didn't try ME7Sum?

Is it possible that I have a modified engine map for higher power?

Yes.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
rpd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #2 on: January 09, 2019, 01:57:11 AM »

Any particular reason you didn't try ME7Sum?

Yes.

I tried to use ME7sum, but it did not fix errors. However, I have read the manual again on the forum and it probably works. The results can you seen in the pictures  Cheesy


So, I it is possible to deduce how much power this modified map can generate? The previous owner did not tell me about tuning
Logged
nyet
Administrator
Hero Member
*****

Karma: +442/-62
Offline Offline

Posts: 10099


WWW
« Reply #3 on: January 09, 2019, 09:43:39 AM »

Log it.

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
rpd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #4 on: January 09, 2019, 02:11:14 PM »

Log it.


Okay, I will do logs, but first i want to remove the SAI system.

This is my BIN with zeroed values of MSLUB and MSLBAS. After corrections in the ME7sum and I checked it in ME7check. There are no errors, so now can I flash it to the ecu safely?
Logged
albizkit
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


« Reply #5 on: January 10, 2019, 11:15:17 AM »

This will help you
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)