NefMoto > Technical > Reverse Engineering > Disable Immo on ME7?
Pages: [1]
« previous next »
Author Topic: Disable Immo on ME7?  (Read 13593 times)
Michel94
Guest
« on: February 21, 2012, 10:18:10 AM »
Hi, i search how i can disable Immo on ME7 to replace ecu or start without key ? thanks
« Last Edit: February 28, 2012, 01:27:38 PM by Michel94 » Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #1 on: February 21, 2012, 10:47:04 AM »
If its the same as me7.5 then download EEPROM. Change bits 12 and 22 from 1 to 2 then recalc checksum and you're done.
Logged
Michel94
Guest
« Reply #2 on: February 21, 2012, 11:10:54 AM »
ok, but how i can download eprom 24C02? i require to unsolder it? i can't read it via odb? thanks
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #3 on: February 25, 2012, 09:26:15 AM »
http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=

This is what you need
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923
« Reply #4 on: February 26, 2012, 11:58:41 AM »
Quote from: Michel94 on February 21, 2012, 11:10:54 AM
ok, but how i can download eprom 24C02? i require to unsolder it? i can't read it via odb? thanks

even if the software posted above doesn't work, hold on desoldering. Just get a proper clip on adapter and you can read the chip off without desoldering.
Logged
Michel94
Guest
« Reply #5 on: February 26, 2012, 12:22:50 PM »
ok i will try this.
« Last Edit: February 28, 2012, 01:35:11 PM by Michel94 » Logged
kaross
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 63
« Reply #6 on: July 28, 2012, 02:26:12 AM »
I also want to immo of on ME7.1
0261206015 4.2V8 engine from Audi S8.
on PCB there is no 24c02.
Could it be 95040?
Is immo off can be done like mention above.
Logged
kaross
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 63
« Reply #7 on: July 28, 2012, 02:30:54 AM »
by the way 24c02 has 256byte space, but 95040 has 256byte.
Logged
kaross
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 63
« Reply #8 on: July 28, 2012, 03:52:17 AM »
95040 has 512byte space. my mistake.
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136
« Reply #9 on: August 06, 2012, 07:57:45 AM »
Quote from: julex on February 26, 2012, 11:58:41 AM
even if the software posted above doesn't work, hold on desoldering. Just get a proper clip on adapter and you can read the chip off without desoldering.

This is what I used test clip and cable about 10quid and willem programmer no desoldering no problems
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 03:44:21 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.038 seconds with 16 queries. (Pretty URLs adds 0s, 0q)