I know it but i dont know what change. Thinking about create own measure block? We cant go higher with original block?
well you can do both ways
create a new measurement (based on another)
or change routine and formula of original one
here is 2nd:
replace this
loc_88682C:
mov r4, mshfm_w
cmp r4, #3333h
jmpr cc_NC, loc_886842
mov r4, mshfm_w
mov r5, r4
shl r5, #2
add r5, r4
jmpr cc_UC, loc_886846
loc_886842:
mov r5, #0FFFFh
loc_886846:
mov [r0], r5
mov r8, #19h
movb rl7, rl5
shr r5, #8
movb rl6, rl5
jmpa cc_UC, loc_88F5DC
with that
loc_88682C:
mov r4, mshfm_w
mov r5, #464Fh
cmp r4, r5
jmpr cc_ULE, loc_1
mov r4, r5
loc_1:
mov MDL, r4
mov r5, #47h
divu r5
movb rl7, MDL
mov r8, #8
movb rl6, #14h
nop
jmpa cc_UC, loc_88F5DC
thus shows up to 500 g/s
but with a low precision (2g/s) and no "g/s" signature
