Pages: [1]
Author Topic: What module is responsible for how quickly the throttle plate closes?  (Read 4335 times)
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269




What maps/module do I need to look at to control how rapidly my throttle plate closes/returns to idle position after letting off the accelerator pedal?

TIA
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: March 08, 2019, 07:13:55 AM »

What maps/module do I need to look at to control how rapidly my throttle plate closes/returns to idle position after letting off the accelerator pedal?

TIA
which ecu
Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269



« Reply #2 on: March 08, 2019, 07:33:32 AM »

which ecu


Critical info left out. I apologize for that. ME7.1 3B0907551BQ (supercharged 2.8 30v)
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #3 on: March 08, 2019, 09:30:26 AM »

Critical info left out. I apologize for that. ME7.1 3B0907551BQ (supercharged 2.8 30v)

Thread up 2 up from the bottom of the stickies should be what you need.
Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269



« Reply #4 on: March 08, 2019, 11:49:27 AM »

Thread up 2 up from the bottom of the stickies should be what you need.

The WG cracking one? I don't have those maps as it's not factory boosted.
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #5 on: March 08, 2019, 12:01:52 PM »

Assuming this is dbw, there is a map/delay which switches state from part throttle to overrun, you can tune this, but afaik its not advised for driveability issues. maybe some pros can chime in.
Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269



« Reply #6 on: March 08, 2019, 12:20:11 PM »

Let me explain my situation, maybe I am going about this incorrectly.

Since adding the supercharger, I believe the vacuum created by the supercharger is sucking the throttle closed faster than before as there's a very abrupt shudder through the drivetrain when lifting off the throttle. Only after boost though. If I'm only in light load, it's smooth like OEM.
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #7 on: March 08, 2019, 03:13:24 PM »

Are you sure its not caused by ARMD ? Some people disable this as they claim not even OEM is 100% right and its copy pasted through many ME7 ecus , and since you were NA before it could cause issues.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #8 on: March 08, 2019, 05:33:25 PM »

This is due to friction torque being wrong and you did not modify the map.
The supercharger places additional frictional losses upon the engine.
After that if it's still not very good, have a look at LSD and dashpot functions and slow them down a little in affected areas.

Oh and disregard what Blazius was saying as none of it even remotely applies.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #9 on: March 08, 2019, 05:58:04 PM »

This is due to friction torque being wrong and you did not modify the map.
The supercharger places additional frictional losses upon the engine.
After that if it's still not very good, have a look at LSD and dashpot functions and slow them down a little in affected areas.

Oh and disregard what Blazius was saying as none of it even remotely applies.

aight.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)