Cant write on older me7.5 ecu

Pages: [1] 2

« previous next »

Author

Topic: Cant write on older me7.5 ecu (Read 8465 times)

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Cant write on older me7.5 ecu « on: July 16, 2019, 03:11:55 PM »

Hi,

i have a strange 8L0906108N APY ecu here. I were unable to write to the ecu via obd on the bench so i had to boot.
I did immo off aswell while ecu was open and ready2boot.

attached files are on the ecu when things happen like described.

mpps18 repeatedly shows switching to high speed Undecided

mpps12-16 shows block transfer message correctly received
nefmoto shows:

Quote

Validated FTDI device is in dumb mode.
Disconnected
Connecting...
Starting fast init connection.
Connecting to address 0x01.
Fast init sent, sending start communication request.
Switching to KWP2000 session.
Connected
Fast writing premium feature NOT enabled.
Disabling Windows sleep mode.
Writing ECU flash memory.
ECU reports programming session preconditions have been met.
Negotiating communication timings.
Successfully changed to new communication timings.
Requesting security access.
ECU reports that security access is not supported.
Starting diagnostic session.
Disconnecting because no response was received for the Tester Present message.
Disconnected
Writing ECU flash memory failed.
100% complete.
Restoring Windows sleep mode.

i did try to change the voltage but nothing happened.
older mpps sometimes prompted "switch off and on again" and it did start to write but it is not repeatable for the user.

so i would like to know what is wrong with this kind of pre facelift ecu(s)

usually i use 1024kb ecus and they just work


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: Cant write on older me7.5 ecu « Reply #1 on: July 16, 2019, 03:18:18 PM »

Quote from: aef on July 16, 2019, 03:11:55 PM

mpps12-16 shows block transfer message correctly received
nefmoto shows:
i did try to change the voltage but nothing happened.
older mpps sometimes prompted "switch off and on again" and it did start to write but it is not repeatable for the user.

so i would like to know what is wrong with this kind of pre facelift ecu(s)

usually i use 1024kb ecus and they just work

Tried pulling instrument fuse with mpps via obd? ? Sometimes mines does that, sometimes it doesnt , I just pull immo fuse, ignition on, ignition off, instrument fuse back in , try again, if doesnt work, try with instrument fuse fully off. For some reason the instrument fuse disrupts the kline sometimes , but its weird you cant do it in bootmade either.

Also, are you sure it has a stock chip in it ?


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Cant write on older me7.5 ecu « Reply #2 on: July 16, 2019, 03:30:47 PM »

All described happened on the Bench like i wrote.
Chip is 400bb


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: Cant write on older me7.5 ecu « Reply #3 on: July 16, 2019, 10:59:54 PM »

That ECU doesen't support writhing tru OBD. I tryed with galleto 1960, galleto 2, mpps, nefmoto.
Only boot mode

Same as new ECU(software not hardver) doesen't support reading via OBD
http://nefariousmotorsports.com/forum/index.php?topic=16265.msg126044#msg126044


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Cant write on older me7.5 ecu « Reply #4 on: July 16, 2019, 11:01:06 PM »

Quote from: aef on July 16, 2019, 03:11:55 PM

Fast writing premium feature NOT enabled.

Why are you using that version of nef?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Cant write on older me7.5 ecu « Reply #5 on: July 16, 2019, 11:54:27 PM »

@blackt you are not correct
i did write some of these already i think

@nyet
Because its the one i have installed. Didnt check for newer version for years because i don't use it.
Do you mean its old version or do you refer to the premium non licenced version?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Cant write on older me7.5 ecu « Reply #6 on: July 16, 2019, 11:55:44 PM »

Quote from: aef on July 16, 2019, 11:54:27 PM

The latest version no longer requires a license for the premium features.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Cant write on older me7.5 ecu « Reply #7 on: July 16, 2019, 11:59:14 PM »

okay nice to hear but is this related to my problem with the ecu?

Quote

Requesting security access.
ECU reports that security access is not supported.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Cant write on older me7.5 ecu « Reply #8 on: July 17, 2019, 12:03:47 AM »

Quote from: aef on July 16, 2019, 11:59:14 PM

okay nice to hear but is this related to my problem with the ecu?

No. Your ECU looks like a weird variant and I don't think anything will flash to it over OBD.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Cant write on older me7.5 ecu « Reply #9 on: July 17, 2019, 12:10:24 AM »

http://nefariousmotorsports.com/forum/index.php?topic=6324.0

maybe this is my problem Huh

didnt have 121 powered


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: Cant write on older me7.5 ecu « Reply #10 on: July 17, 2019, 03:43:20 AM »

Quote from: aef on July 17, 2019, 12:10:24 AM

http://nefariousmotorsports.com/forum/index.php?topic=6324.0

maybe this is my problem Huh

didnt have 121 powered

512 kb ECUs dont have power on 121 pin in car


« Last Edit: July 17, 2019, 03:45:39 AM by BlackT »	Logged

fknbrkn

Hero Member

Karma: +185/-23
Offline

Offline

Posts: 1454

mk4 1.8T AUM

	Re: Cant write on older me7.5 ecu « Reply #11 on: July 17, 2019, 03:43:54 AM »

That's definitely the reason
Nef shows warning about wrong memory layout on these ecu but it's ok


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Cant write on older me7.5 ecu « Reply #12 on: July 17, 2019, 04:31:49 AM »

Quote from: fukenbroken on July 17, 2019, 03:43:54 AM

That's definitely the reason
Nef shows warning about wrong memory layout on these ecu but it's ok

Whats the reason?


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: Cant write on older me7.5 ecu « Reply #13 on: July 17, 2019, 05:27:39 AM »

So if 512kbs ECU's dont have 121/62 powered etc. ,how am I flashing my 512kb NB ME7.5 thru MPPS via OBD without bootmode in car? Cheesy


« Last Edit: July 17, 2019, 05:32:00 AM by Blazius »	Logged

fknbrkn

Hero Member

Karma: +185/-23
Offline

Offline

Posts: 1454

mk4 1.8T AUM

	Re: Cant write on older me7.5 ecu « Reply #14 on: July 17, 2019, 06:09:12 AM »

Quote from: aef on July 17, 2019, 04:31:49 AM

Whats the reason?

Pin121 etc


	Logged

Pages: [1] 2

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 04:29:31 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search