NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > wideband on 2.7t
Pages: [1]
« previous next »
Author Topic: wideband on 2.7t  (Read 3172 times)
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« on: September 26, 2019, 11:34:38 PM »
wondering what all you 2.7t guys are using for widebands? i have an aem setup but i dont see the point in installing it only to one bank? how is the second bank monitored? or are you guys running the dual sensor setups
Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348
« Reply #1 on: September 27, 2019, 02:13:34 AM »
I am using a Ld performance wideband( "same" as innovate but cheaper) on bank1, its easily moved to bank2
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #2 on: September 27, 2019, 02:41:33 PM »
I have a single channel zeitronix which has been reasonably reliable

Nice to be able to log actual manifold pressure accurately as well, as i have a pressure sensor for it too.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« Reply #3 on: September 27, 2019, 03:19:47 PM »
So I guess since I don’t have a zt-2/4 just put the sensor in one of the banks and if I suspect something just swap banks?
Guy I bought my wheels from gave me a dual gauge defrost vent pod (3D printed) Just don’t want to leave one pod open you know
But thought it didn’t make much sense to only monitor one bank on a twin spoolie engine unless you’re big single or something
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #4 on: September 27, 2019, 06:06:42 PM »
Quote from: dilly on September 27, 2019, 03:19:47 PM
So I guess since I don’t have a zt-2/4 just put the sensor in one of the banks and if I suspect something just swap banks?
Guy I bought my wheels from gave me a dual gauge defrost vent pod (3D printed) Just don’t want to leave one pod open you know
But thought it didn’t make much sense to only monitor one bank on a twin spoolie engine unless you’re big single or something

Well, you can always eyeball the narrow band voltages to spot bank discrepancies...
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« Reply #5 on: September 27, 2019, 06:33:27 PM »
Quote from: nyet on September 27, 2019, 06:06:42 PM
Well, you can always eyeball the narrow band voltages to spot bank discrepancies...

gotcha, thanks
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 02:08:49 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)