ibiza cupra R file -> ibiza 20VT

Pages: [1] 2

« previous next »

Author

Topic: ibiza cupra R file -> ibiza 20VT (Read 14769 times)

fever

Newbie

Karma: +2/-0
Offline

Offline

Posts: 23

	ibiza cupra R file -> ibiza 20VT « on: March 15, 2012, 12:03:37 AM »

Hi there ! I'm completely noob with this, so asking You for little help.
I have ibiza 1.8t 20v. I'm thinking to reflash it with standard cupra R file.
Mechanicaly they are completly same, you can even put cupra R ECU, adapt immo and it will run just fine.
So, my question is, can i flash it directly ?
Do i need to correct checksums ?
Both have immo2, can i have any issues with immobilizer ?

Thanks in advance!

C:\Users\km>me7check.exe R.BIN
========================================================
me7check v1.11 (c) mki, 06/2004-07/2011
Checking file R.BIN (size=524288)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 44/1/ME71/05/6001_01//prog16d/dat16d/180797/
-> Contents of ECUID data table:
- '0261207072' (SSECUHN)
- '1037354563' (SSECUSN)
- '6K0906032AB ' (VAG part number)
- '0001' (VAG sw number)
- '1.8L20VTCUPRA R ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

-> No errors found. File is OK. *********************

C:\Users\km>me7check.exe 20VT.BIN
========================================================
me7check v1.11 (c) mki, 06/2004-07/2011
Checking file 20VT.BIN (size=524288)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 44/1/ME71/05/6001_01//prog16d/dat16d/180797/
-> Contents of ECUID data table:
- '0261206023' (SSECUHN)
- '1037352176' (SSECUSN)
- '6K0906032 ' (VAG part number)
- '0002' (VAG sw number)
- '1.8L R4/20VT SEAT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

-> No errors found. File is OK. *********************


	Logged

Nottingham

Full Member

Karma: +13/-1
Offline

Offline

Posts: 204

	Re: ibiza cupra R file -> ibiza 20VT « Reply #1 on: March 15, 2012, 07:35:41 AM »

Check your engine code before flashing:

Some Cupras with AQX engine code have 282cc/min injectors instead the 317cc injectors found in AYP.
You might want to check the KVB value from your original and the new file. Of course it is not that hard to check the part number from the injector itself:

06A906031AB = 282cc
06A906031BA = 317cc

Otherwise the engines are mechanically identical, yes.


	Logged

fever

Newbie

Karma: +2/-0
Offline

Offline

Posts: 23

	Re: ibiza cupra R file -> ibiza 20VT « Reply #2 on: March 15, 2012, 11:35:06 AM »

Thanks for reply.
My engine code is AQX, not sure about injectors, will check them tomorow.
So, what about checksums and immo ?
THX!


	Logged

Nottingham

Full Member

Karma: +13/-1
Offline

Offline

Posts: 204

	Re: ibiza cupra R file -> ibiza 20VT « Reply #3 on: March 15, 2012, 12:41:36 PM »

Changing the flash does not require re-adapting the Immo.
Also the checksums seem to be fine for the files so there should not be any problems.


	Logged

fever

Newbie

Karma: +2/-0
Offline

Offline

Posts: 23

	Re: ibiza cupra R file -> ibiza 20VT « Reply #4 on: July 02, 2012, 06:51:44 AM »

Alright.

I had checked my injectors and they appears to be 282cc ones. So, it takes me some time, to buy a 317cc at a decent price. Finally got a set from eBay.
On past weekends i had managed to reflash my ibiza whith a cupra R SW successfully! Cheesy

Using dumb eBay blue cable and latest release of nefmoto flasher! Wink

Car starts and works well, throws no codes etc, so i've started to change injectors and other stuff like im and tb gaskets, seals and plastic seats cuz old ones were leaking badly.
And ofcourse one of the new plastic seat decided to crack... Now waiting for 2-3 days till new one arrives. Cry

Thank You all guys! That's an awesome forum! I will keep reading more, cuz i think i will go for st1 next time.
Need to finish .kp first. Wink

And understand NB ECU fuelling


	Logged

fever

Newbie

Karma: +2/-0
Offline

Offline

Posts: 23

	Re: ibiza cupra R file -> ibiza 20VT « Reply #5 on: July 13, 2012, 04:03:34 AM »

Completed.

Car runs great, and everything is fine.
Also my vac is now in place, due to new seals and gaskets. Wink

Cheers!


	Logged

TheRamon

Newbie

Karma: +1/-0
Offline

Offline

Posts: 14

	Re: ibiza cupra R file -> ibiza 20VT « Reply #6 on: May 15, 2015, 05:25:59 AM »

Sorry about bringing this topic back up, but..

I have an AYP engine with those 317cc injectors and was about to flash the R bin to my ECU.
The only thing that has worried me and stopped me from doing so is the following:

The Original checksums logs from ME7Check that the topic starter has posted both have the same EPK.
My EPK is slightly different though. (See attached file)
Instead of ME71 it says ME7.5.
Now those two are different versions. Will I have any issues writing this R.BIN to my ECU?
I can't seem to figure it out. (Without actually trying, of course Grin

)

==============================================================================
ME7Check v1.12 (c) mki, 06/2004-05/2012
Checking file C:\Documents and Settings\Administrator\Desktop\156ps.bin (size=524288)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 41/1/ME7.5/51/4518.AB//21e/Dst02o/130600//
-> Contents of ECUID data table:
- '0261207071' (SSECUHN)
- '1037354562' (SSECUSN)
- '6K0906032AA ' (VAG part number)
- '0002' (VAG sw number)
- '1.8L 20VT EU3 ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

-> No errors found. File is OK. *********************


	Logged

- Seat Ibiza Cupra 1.8 20VT

wesselh93

Newbie

Karma: +2/-1
Offline

Offline

Posts: 23

	Re: ibiza cupra R file -> ibiza 20VT « Reply #7 on: July 13, 2015, 09:20:15 AM »

I'm a little curious myself if the last post would actually work, since I do not have a spare ECU yet, i can't try


	Logged

TheRamon

Newbie

Karma: +1/-0
Offline

Offline

Posts: 14

	Re: ibiza cupra R file -> ibiza 20VT « Reply #8 on: July 13, 2015, 11:11:16 AM »

Just check out this topic. I've managed to do it! Grin

http://nefariousmotorsports.com/forum/index.php?topic=8327.0


	Logged

- Seat Ibiza Cupra 1.8 20VT

mk-3

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 31

German//Ibiza 1.8 20VT ME7.5 SX200SXE

	Re: ibiza cupra R file -> ibiza 20VT « Reply #9 on: July 30, 2015, 02:32:21 PM »

ive got the same car with the same engine.
was it possible to flash without boot mode?
sorry for dumb questions but i dont want to brick my ecu


	Logged

TheRamon

Newbie

Karma: +1/-0
Offline

Offline

Posts: 14

	Re: ibiza cupra R file -> ibiza 20VT « Reply #10 on: July 31, 2015, 01:52:31 AM »

Yeah was possible using the nefmoto software. Great piece of software. Just try and read first and compare the read file with the tuned one Grin


	Logged

- Seat Ibiza Cupra 1.8 20VT

mk-3

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 31

German//Ibiza 1.8 20VT ME7.5 SX200SXE

	Re: ibiza cupra R file -> ibiza 20VT « Reply #11 on: July 31, 2015, 03:16:06 AM »

Hmm i'll try to take the r.Bin File and Chance the settings of the injector to mine, Check and correct checksum and Flash it to my ECU. I'll Report my experience then

Is it normal that my ECU says "this is the RAM Program"? When I read out?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: ibiza cupra R file -> ibiza 20VT « Reply #12 on: July 31, 2015, 05:58:56 AM »

Quote from: mk-3 on July 31, 2015, 03:16:06 AM

Is it normal that my ECU says "this is the RAM Program"? When I read out?

Yes. When in programming mode that is what it will say.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

TheRamon

Newbie

Karma: +1/-0
Offline

Offline

Posts: 14

	Re: ibiza cupra R file -> ibiza 20VT « Reply #13 on: July 31, 2015, 06:26:23 AM »

As stated above, that's normal yeah. Grin

Don't use the R.bin as it's a clean file. Needs much work. Use the file out of this topic:

http://nefariousmotorsports.com/forum/index.php?topic=8327.0

I've already modified it for an AYP engine with injectors blah blah.. It's a good read! Will save you a lot of time.

Search for:
180ps_cupraRplus.bin (512 KB - downloaded 5 times.)


	Logged

- Seat Ibiza Cupra 1.8 20VT

mk-3

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 31

German//Ibiza 1.8 20VT ME7.5 SX200SXE

	Re: ibiza cupra R file -> ibiza 20VT « Reply #14 on: July 31, 2015, 07:33:34 AM »

Thank you for that!!

Which injectors Do you have? Im expecting to use my Stock (283cc?) by comparing the Files. What Do i have to change? Only krkte?


	Logged

Pages: [1] 2

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 07:46:36 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?