Pages: [1]
Author Topic: Repairing EGT sensor. 1.8T  (Read 2937 times)
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« on: October 06, 2019, 08:07:46 AM »


I was silly enough to pull the braided wire out the of actual probe.  I’ve removed the silver crimped section and have access to the wires.

Does it matter which way round the wires go?  I guess it’s a resistance based sensor so the orientation of the wires wouldn’t matter but would like someone to confirm before I put it back together.

Chris
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #1 on: October 06, 2019, 12:08:32 PM »

It is K-type termocouple, It produce voltage as it getting more heat. So polarity is important
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« Reply #2 on: October 06, 2019, 01:45:58 PM »

Do you know which way round it goes?
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #3 on: October 06, 2019, 02:24:17 PM »

If my memory work well, it schould have red and white wire  Huh
What you mean by "round"?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)