Alright, no more screenshots of text.

Would be a small resolution anyways, but Tats is not available. Displays constant 1110.
Yes, I do need an EGT gauge.

With the improved exhaust flow, would calculated be higher than expected?
Just to clarify anything, does that include parameters?


Looking for CWMDAPP to work with KFLDRL.
Compared against HN. Got 181BC but no conversion.
Does CMWDAPP max out at 8? If so , would it be 0.031373*X.

P/N:06A906032RN

 

Checked FR and searched threads.
What I found was mention of setting Hex 08 or 01.

Did that but it didint follow set KFLDRAPP.
Hmmm, 181BC may be the wrong address.

Ahhhhhh easy to check, should've looked harder at FR. Will do for reassurance.

Thought PID-I-Max follows KFLDIMX directly. Makes more sense that It would
Follow KFLDRL output from KFLDIMX input. Derp, alright.

Still muddled about CWMDAPP

Will look into it further but it does appear that

ldimx_w = KFLDRL output by KFLDIMX input (capped by TVLDMX?).

Correlates with logs.

Me7.1FR:868

Ignoring Corrections.
KFLDIMX and TVLDMX input a Min/Max table? Outputting
ldimx_w (PID-I-Max)

I dont see this at all for ME7.1 anyway

Maybe it is different in ME7.5.

LDRL is only used to map pre-lin (ldtvr_w) wgdc to post lin wgdc (ldtv)